11287 Posted May 21, 2015 Share Posted May 21, 2015 Yes I am in Australia. If you go to the Advanced Ratio Sports & Tactical Facebook page you could contact them and ask who they supply in the rest of the world. I contacted a company called gunsandgear in Australia. They stock the advance ratio xcel thumb rest. I could not check out through their website. I emailed and they stated they are not set up to ship outside of Australia. Looks like something I would love to try on my Czechmate. Link to comment Share on other sites More sharing options...
MrPostman Posted May 22, 2015 Share Posted May 22, 2015 Why don't you just have someone make one for you? I make them for my STI and Tanfoglio pistols, I could probably make one for a Czechmate but I would need a gun to mock one up on. Link to comment Share on other sites More sharing options...
11287 Posted May 23, 2015 Share Posted May 23, 2015 Why don't you just have someone make one for you? I make them for my STI and Tanfoglio pistols, I could probably make one for a Czechmate but I would need a gun to mock one up on. If you find someone to supply you with a Czechmate and you make a thumb rest. I would be in for buying one. There just doesn't seem to be any viable option for a thumb rest on the Czechmatel Link to comment Share on other sites More sharing options...
MrPostman Posted May 23, 2015 Share Posted May 23, 2015 Does anyone know the spacing on the Czechmate mount holes and screw sizes? Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 23, 2015 Share Posted May 23, 2015 Does anyone know the spacing on the Czechmate mount holes and screw sizes? Three M4 screws 15mm on center Link to comment Share on other sites More sharing options...
MrPostman Posted May 23, 2015 Share Posted May 23, 2015 Thanks! I should be able to make one with the measurements. I will post a pic when its done Link to comment Share on other sites More sharing options...
jon49erfan Posted May 23, 2015 Share Posted May 23, 2015 The other thing is there is an indentation in the frame for the factory mount to fill. http://www.pakguns.com/attachment.php?attachmentid=15717&stc=1&d=1355728065 Link to comment Share on other sites More sharing options...
MrPostman Posted May 23, 2015 Share Posted May 23, 2015 (edited) It can be made to fit the gun without the optic mount as well, I just need to tweak the design a bit. Maybe the use of a shim when the thumbrest is used without the optic mount is a viable option as well. Edited May 23, 2015 by MrPostman Link to comment Share on other sites More sharing options...
11287 Posted May 24, 2015 Share Posted May 24, 2015 The other thing is there is an indentation in the frame for the factory mount to fill. http://www.pakguns.com/attachment.php?attachmentid=15717&stc=1&d=1355728065 What grips are on that gun in your picture and where can I buy a set. I shot my first match with my new to me Czechmate yesterday. Although the factory installed grips were great for holding onto the pistol, the grip tape tore the inside of my forearm up when it was in the holster. Link to comment Share on other sites More sharing options...
jon49erfan Posted May 24, 2015 Share Posted May 24, 2015 those are CZ ub grips. Link to comment Share on other sites More sharing options...
11287 Posted May 24, 2015 Share Posted May 24, 2015 Does CZ custom sell these. If they do, I can't seem to find them. Like I said the stock grips on the Czechmate work well and I like the grip tape. However, between stages just walking around, the grip tape is at position that it tears up the inside of my forearm I know I should just man up and let it scab over into a callus. Link to comment Share on other sites More sharing options...
jon49erfan Posted May 24, 2015 Share Posted May 24, 2015 AFAIK, they dont sell them. You can get them here http://www.shop-cz.com/grips-for-cz-75-ts-short-checkered-black/d-71891/ Link to comment Share on other sites More sharing options...
BeerBaron Posted May 25, 2015 Share Posted May 25, 2015 have a look at ipsc alex. - http://ipscalex.com/collections/pistol-accessories/products/thumbrest he makes a thumb rest to suit tanfoglio open guns as well as STI/2011's. I bet if you asked him he could make one with the CZ hole pattern. I'm sure if you got say 5 guys who wanted one that would help even more. I have one of his for my tanfog and it's a great product and he was fantastic as a company to deal with. Very good service and nice products. Link to comment Share on other sites More sharing options...
lordres Posted May 26, 2015 Share Posted May 26, 2015 I ended up with the tangfo alex thumbrest as well. It had to be modified to fit. My friend had to remove a bit of the tail and drill/tap a new hole in it and the Cheely mount. It may need further modification as well, a slot cut in the middle so I can adjust the c-more through it, and the bottom corner needs to be rounded as it catches in my belt and body when I draw. Link to comment Share on other sites More sharing options...
RobE1010 Posted June 2, 2015 Share Posted June 2, 2015 Contact my friend Adrian Tan at Advance Ratio Sports & Tactical on FB. He is making them now. Tell him Rob sent you. Link to comment Share on other sites More sharing options...
alfordap Posted June 3, 2015 Share Posted June 3, 2015 I got a hold of Adrian Tan of Advace Ratio Sports & Tactical and he will be in the USA June 14th so if you need one get on his facebook page and let him know. While he is in the USA he will be mailing them out for orders Thanks RobE for suggesting him https://www.facebook.com/AdvanceRatio/timeline Link to comment Share on other sites More sharing options...
banknotes Posted July 4, 2015 Share Posted July 4, 2015 Thanks buddy for the great review, we appreciate it a lot! Thank you for supporting us for getting the thumb rest! Regards with Blessings Adrian Tan Link to comment Share on other sites More sharing options...
banknotes Posted July 4, 2015 Share Posted July 4, 2015 Yes I am in Australia. If you go to the Advanced Ratio Sports & Tactical Facebook page you could contact them and ask who they supply in the rest of the world. I contacted a company called gunsandgear in Australia. They stock the advance ratio xcel thumb rest. I could not check out through their website. I emailed and they stated they are not set up to ship outside of Australia. Looks like something I would love to try on my Czechmate. Hi there. I am the one who made them...thanks for showing your keen interest:), I am Adrian and I do not operate from a website but I operate from the FB page itself, my name is Adrian. Nice to meet everyone here... Link to comment Share on other sites More sharing options...
Zuma Posted July 4, 2015 Share Posted July 4, 2015 I got one of Adrian's thumb rest and it fits perfectly. It's nicely done and he's great to do business with. Link to comment Share on other sites More sharing options...
Hoosiershooter Posted July 4, 2015 Share Posted July 4, 2015 To throw a twist in this topic, can I get one for a lefty? Are any of the thumb rests adaptable to left hand use? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Zuma Posted July 4, 2015 Share Posted July 4, 2015 I'm pretty sure he makes a lefty also, because when I ordered mine he asked me rightly or lefty. Link to comment Share on other sites More sharing options...
banknotes Posted July 5, 2015 Share Posted July 5, 2015 To throw a twist in this topic, can I get one for a lefty? Are any of the thumb rests adaptable to left hand use? Sent from my iPhone using Tapatalk Hi, I do have a lefty, in black only. Please get in touch with me in Facebook messenger at Advance Ratio Sports and Tactical. Regards Adrian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now