usmc1974

Uzi 9mm, 45 Longslide with lazer sighting, Phased Plasma rifle in a 45 watt range

Keep it, I still need mine from time to time. What do they say better to have it and not ??

What about IMR SR7625.

I did a search can't seem to find any body selling them 45 cal .452 185 moly coated flat point or round nose.

I called EAA and they assured me you can shoot lead bullets in there polygonal rifled barrels. The 45 limited I have, it has a massive bull barrel, ten times stronger then a Glock barrel. Still, I will top all mags with a jacketed bullet of proper weight. This is till I get all lead bullets used then, I think I will go with Berrys 185 FMJFP I can get them fairly cheap. Well, thats the plan anyway.

It sets very nice in the hand and looks great, these thing are important if you can't make GM you got to at least look cool shooting B class It has polygonal rifling but the bull barrel is like massive, 10 times heavyer then a Glock barrel

A small amount of liquid lanolin 1/4 oz in a 12 oz's 91 alcohol shake well and put in a small spray/pump bottle and your good to go for bottle neck cases about 3/4 oz liquid lanolin in the mix

http://www.copquest.com/23-8101.htm looks 15.50

Did not say, M&P sucked!! said S&W autos in general, suck. I've had 39 439 469 645 and 745 loose parts,poor triggers light primer hits is not new to S&W. "Striker action pistols don't hit primers hard. With very little mass to the pin they rely on spring action for ignition which can be held back by any number of problems". Never had this happen with a Glock 27,19,23,17,34 and 35 0r either of the 2 XD's I had.

I have found the factory triggers on the Tangfolio Limited are not near as good as the factory triggers on the CZ Tactical Sport. If you have not puchased it yet I would ask about the trigger. I got a very deal on the Witness from a good friend. It shoots very nice and has a great trigger breaking at about 3 1/4to 3 1/2 I do need to get a replacement fiber optic front sight and a couple more mags with the fancy bottoms. It feels very good in the hand and nice balance I think I will enjoy shooting. I was worried about lead bullets and polygonal rifling. Everbody knows what happens to Glocks and lead bullets, I would like to avoid this happening.

147 lfp(.356) 5.1 grains power pistol ccispp oal 1.150 very low recoil knocks steel right over.

I am not sure, but I think it was the old recoil spring. I went to a new wolf 10 lb commander length recoil spring and the primers looked ok, same load of 135fmj 6.8 power pistol oal 1.245.

Thanks, I don't think I will shoot lead though one if I do buy one. but they are very cool looking pistolas.

Nice room.

He has a Glock 35 set up for open class it has a Stromlake extended and ported barrel. It has a J point red dot as sight.

You do know, they don't allow spencer rifles in IPSC or blackpowder.

This is the same type problems I have always had with S&W autos. This is why I am holding off on getting a M&P. Great revolvers sucky autos.

I have a EAA witness limited in 45acp. I was wondering if you can shoot lead bullet in these gun. It looks like Glock type rifling.

5 rightys in the front one lefty in the back one in the gun. I like the man said "don't get caught short" I have a 32 inch waist. I have limited waist area

Maybe it is time for the mods to close this?

I called Serria bullets and talked to the tech's they said .355 for both 9mm and 38 super. Now .356 will work in both but the .356 cause higher pressures using jacketed bullets. I use .355 in both 9mm and 38super now I do have a 1000 lead 147 9mm rounds to shoot and about 1500 135 FMJ .356 9mm's but all down loaded to a PF of about 140.

I too am very sorry for your loss and will pray for you and your family. But, your father got his prayer answered, it is the same prayer all fathers have "Dear Lord, don't let my son go first". I know this because my son is in the military and has been to Iraq and Afghanistan with the 10Th mountain rangers and I have prayed it more then once. May the God that passes all understanding grant you peace in this your time of great sadness, amen.

Are you refurring to the LDA single stack gun? You wouldn't have that trouble with a hi cap gun. I did try one I thought man this is a very light DAO gun .

I look forward to reading your out come. Thanks