Hi_Im_Vinh

That LGS had it for $1,870ish or so retail price Top Gun Houston....I'm not sure if I'm allowed to give out CZC pricing over the board....but I will tell you it is by far the best deal out there for a in-stock TSO

I held a TS Orange 9mm at my local gun store last sunday and knew I had to have one ( in .40 ) . Thanks to Stuart for jumping in this thread , purchased a TS Orange .40 and should be arriving tomorrow.

pm sent

If only they have them in .40 S&W I'd be all over it

At least they are taking care of you , I see your a fellow IX owner as so . Any crazy mods done?

Handled a TS orange in 9mm today, instantly fell in love. Grip geometry fit my much better than a standard TS

Yes you're so right, not sure why I typed yellow instead of green lol

Xtreme 147gr plated bullets w/ 3.6gr Win-231 loaded to 1.155 out of my Shadow Custom ... soft/accurate load that I've ran for awhile. I'm actually able to load longer with these bullets ( 1.165) but since I load for my Shadow and my brothers Sp-01 I keep it at that length for both our guns .

Xtreme 147gr / 3.6gr Win-231 loaded to 1.155 nets me 129PF , I've tried Clays and Titegroup but somehow my Sp-01 Shadow likes this load.

I agree , the disconnector CZ custom offers ( the Pre-B disconnector ) has a short reset . I have one in my Shadow and comparing it to another SP-01 with CGW disco I like the CZC better.

Did you change the red fiber optic to yellow or it came that way?

What I dislike on the P07/09s the most is the DA trigger from factory after shooting one

I'm curious myself how the P10C stacks up against P-07

Being that the upper is that of a Tac-Sport I figured it would be easier to acquire a comp for it . That and I like the idea of having a beefier upper slide and keeping the lower frame of a basic cz75 which I'm comfortable with.

Just looking to see if anyone has done this already and if so what was involved? I'm considering this route to go open class for reason being that I prefer the lower frame grip of the cz75 vs that of the tac sport.

Let me know how the Czech mate runs vs the gold team match

Thanks for your input, how many rounds have you put through yours? If you had to do it again, would you go with this gun , or another route?

I'm looking to purchase an already built open gun and this model caught my attention. I currently shoot a sp-01 shadow in production and want to venture into the open class without having to build a open gun . How do these guns run out of the box? Anything modification wise would I need to do? And most importantly, how is the reliability to it? If anyone has any other suggestions on a ready built race gun under 2k range, by all means I'm open to it. Thanks to all

How much did they charge to open up the loading port?

Yes I know... haha . No recoil reducer nor sidesaddle ( not quite sure what that is ) , also what is a RP 10/22 . Do you mean ruger 10/22 ? Thanks for all your input I'd like to avoid cutting springs if possible Estate Super Sport Competition Target Load 1 oz. / 7.5 shot from Academys , I just looked at the box now and it says 1235 fps . but still the lightest recoil I've felt vs all the winchester and remington I've tried and it cycles them excellent

I recently purchased a brand new Stoeger M3k for 3-Gun as my first shotgun , so far I've put roughly 300 or so rounds of various ammo through it all rated at 1200fps or higher . My issue now is trying to get it to cycle/run some Norma 12 gauge ammo I purchased, went crazy on black friday and purchased 55 boxes ( I know rookie mistake ) . Boxes stated 1200 fps so I figured hey why not at $4.87 a box / free shipping. I've followed some steps online and youtube to help the shotgun cycle these loads : 1. Sand/Polish magazine tube that recoil spring sits on 2. Sand/Polish contact points on the Action Bar that holds bolt 3. Sand/Polish the two rear parts of the bolt that comes in contact with the hammer and carrlier latch when bolt comes rearward to stock 4. Polish contact points bolt makes with hammer and carrlier latch lever Another idea that I'm pondering since my issue lies in a FTE issue , is to change out the hammer spring to a lighter one . Reason being when I rack the bolt back you can feel the most tension in the action when the bolt makes contact with the hammer. Thanks to all those who can chime in and help me out.

I recently purchased a brand new Stoeger M3k for 3-Gun as my first shotgun , so far I've put roughly 300 or so rounds of various ammo through it all rated at 1200fps or higher .

They are the factory hammer pins I believe , how has your pins been holding up since the loctite has been applied?

Yes I'm just aiming for a smoother trigger that's all