Hi_Im_Vinh

I'm sitting at around 7k or so rounds through my TSO and sights look fine ....sucks it happened to you

About to mount a Leupold DP Pro onto my Shadow Sp-01 for CO division and noticed the factory cz box won't fit the gun even if I try to trim the foam padding for it... So my question for those with this setup is , what case did you guys end up going with ? I'm looking to stay with a hard case and not a soft one , that can also hold my mags

I'm using a ghost "the one" holster for my tso and it also works with a regular ts

yes it will

Thanks for the tip ! Been trying to figure out for the longest how to insert images... so here is an image of my TSO that I've added the CZC oversized safety and an aftermarket thumbrest for it from IPSCALEX

3.5gr W-231/ HP38 147gr Xtreme plated 1.150 OAL Good production load I've been using

Here's a TSO .40 for $1649 free shipping https://vizardsgunsandammo.com/cz-91260-cz-75-tactical-sport-single-40-smith-wesson-s-w-5-4-17-1-orange-aluminum-grip-blk/?utm_source=Vizards+Guns+And+Ammo+news+letter&utm_campaign=042fd1caac-EMAIL_CAMPAIGN_2017_06_20&utm_medium=email&utm_term=0_6872f3eb95-042fd1caac-168386513&mc_cid=042fd1caac&mc_eid=550fea85a6

Nice gun, how did you go about uploading the pics like that?? Sorry for the off topic question

Yeah the TSO needs magwell blending for sure , but once performed my reloads no longer got hung up during a match

I got a Orange to shoot limited because of the thumbrest, tight fitting of slide/barrel, and the grip geometry and checkering . The factory thumbrest sucks, so I upgraded mine to an aftermarket one for the czechmate from IPSCALEX Also, I got mine for $1,630 or so from CZC

I'm using ACME 200gr coated with 3.9-4.0gr of HP-38 and get amazing accuracy out of my Tactical Sport Orange ... and I also make Major with this load recipe out of my gun

I wish I could use a RHT holster , but with my TSO having an aftermarket thumbrest it's a no-go.... also to note the Ghost holster has a muzzle support as well.

Ghost holster " the one "

I ended up using my factory screws and it has been holding fine with some blue loctite

https://imageshack.com/i/pojHYQtCj Here ya go

I posted my aftermarket installed thumbrest from ipscalex in this thread ....it did move the position slightly forward and gave more surface area for my thumb to rest on ....just mention my name if you decide to purchase from him as he will include necessary screws to fit our guns

Does the LS-P weigh less than 45oz? I was looking at a S2 for Carry Optics gun but found out it won't make the weight cut

How much are you letting it go for?

Be sure to add blue loctite to your grip screws and rear sight screws as those will work themselves out after a range trip or two. I personally run a 12# recoil spring to go with my 200gr Acme/ 4.0gr W-231 major load , left the HS stock , blended magwell , and added a bigger safety and thumbrest

200gr ACME coated bullet 4.0gr Win231 1.115 OAL 175 PF

No, I just had to use some washers so the rear of thumbrest doesn't rub on the frame....ipscalex czechmate rest

https://imageshack.com/i/pojHYQtCj Recently installed a CZC wide safety and thumbrest on my TSO , gun feels better to hold now for me .

I ended up using a 12# in my TSO when I tested out both 13 and 14 lb springs , felt more smoother to me and I was able to hit the steel much faster with transitions

Mine is stiff as well... one recommendation to smoothen the engagement of the safety is to 1000grit sand the detent that contacts the safety. Haven't done it to mine yet, I just got used to the stiffness . Others like this because it prevents the safety from accidentally flipping up