usa259

Update: Ended up getting the P Match Pro. Shot it for the first time the other day with Federal AE (1030 fps), Sellier Bellot (1165 fps), and Sig (1250 fps)ammo. Was sighted in from Factory; I didn't adjust anything. Replaced recoil spring with 20lb; worked with the above velocity differences. Grip is grippy ;) Even thou the gun is very light, the recoil was manageable. Overall, really happy with it. The double action trigger pull is very heavy and a little on the long side for me. Is there a way to lighten the double action trigger pull weight without changing the single action feel and pull weight?

Is this the same as the x-five trigger? If so, would it qualify as stock when installed in a regular P320? https://www.sigsauer.com/store/p320-flat-trigger.html Do you think it would it lower pull weight like the Grey trigger?

drewsifer and Endall, Thanks. Any luck finding holster for these?

Cool. Thanks. Will check it out at lunch!

Understood, not for competition use.... Camping hiking Was also looking at the Witness Elite Match, listed as 44oz. compared with the 30.4oz of the P Match.

I'm considering a EAA Witness P Match 10mm. Any experience with one? I did a couple of quick searches, hope this is not a duplicate.

COOL!

In Sailing, there are a couple of rules that apply to this situation and the details are in the one-design class rules and their applicability... I'm proposing changes to my local "one-design" class rules because they are archaic. Basic Principles: SPORTSMANSHIP AND THE RULES Competitors in the sport of sailing are governed by a body of rules that they are expected to follow and enforce. A fundamental principle of sportsmanship is that when competitors break a rule they will promptly take a penalty, which may be to retire. Part 1 Fundamental Rules Rule 2 - FAIR SAILING A boat and her owner shall compete in compliance with recognized principles of sportsmanship and fair play. A boat may be penalized under this rule only if it is clearly established that these principles have been violated. The penalty shall be either disqualification or disqualification that is not excludable. Rule 69 - MISCONDUCT 69.1 Obligation not to Commit Misconduct; Resolution (a) A competitor, boat owner or support person shall not commit an act of misconduct. (b) Misconduct is: (1) conduct that is a breach of good manners, a breach of good sportsmanship, or unethical behaviour; or (2) conduct that may bring the sport into disrepute. (c) An allegation of a breach of rule 69.1(a) shall be resolved in accordance with the provisions of rule 69. It shall not be grounds for a protest and rule 63.1 does not apply.

Cool. Good to understand at this point as I begin this journey.

My first match in IDPA is coming up in a few weeks so new to this, thanks for the help, so if I went flat trigger upgrade then I would be in ESP? Btw, Sig P320 full size 40s&w ...

Can this drop in trigger be used in IDPA SSP?

Thanks. must have been confusing the list idea with uspsa discussions...

Is there an approved list of guns by IDPA division somewhere?

so this past weekend i finaly got around to figuring out the COAL for the xtreme 200gr RNFP, started at 1.225, which would plunk or feed from mag. settled on target length of 1.220 1.205 which feed from mag. Will load up the first 50 at this length with some different powders chargers and test out...

Is their an opening date for John Wick 2? Edit: Interweb says Feb 2017.

Thanks All!

Current bullets are xtreme 200 gr RN, miss ordered. Ordering xtreme 230 RN today as free shipping is in play... I hope to do some trials this weekend; I'll let you know what I come up with

Thank you for the suggestions. Reloading manuals are suggesting, bullet shape dependent, between 1.155" to 1.225". Does seem like the place to start and from my 40 S&W reloading it seems that manual suggested COL's are on the shorter side of what can be cambered or fit in a mag.

Just about to start loading for the 45 to be used in the R1. Anyone found the max OAL?

I found picked these up in an indoor range that doesn't hold competitions...

I was having a lot of 40 rounds not chamber checking, 20% - 30%. For some reason I checked the brass length and decided to trim to minimum trim length and problem went away. Just another thought...

And I would thinking the barrel and spring/ guide rod combination...

Picked up, purchased, the R1 Carry Commander. Its sweet, shoots great.

I bought a caliber conversion kit, not to change calibers, only to change from full size to compact. Of course in my case, there were many differences mostly dealing with length. The one difference I wasn't expecting was the guide rod hole in the slide was larger in the compact slide. In your case I would suspect the barrel hole in the slide might be larger for the 40 than the 9mm. Any local shops near you with both in stock? Sig Customer Service? I've read in one of the 320 posts that the slides are different weights...

Is there a Bayou Bullets code to be shared?