KAYZER

Anybody here can tell me what you can fit in your Tanfog mags, large frame in .40 cal? With Eric Grauffel baseplate and arrandondo folower im stuck at 17, was hoping for 18 re-loadable! Also anyone experience with getting a witness hole drilled for the bottomround

Magazines. Expand capacity with basepads and remove slidelock Verzonden vanaf mijn iPhone met Tapatalk

Just bought a factory replacement and will measure the old one. Had to do some fitting though the replacement was oversized Verzonden vanaf mijn iPhone met Tapatalk

I was planning on getting some Tin coating done, now I'm sure~!~!

Any tips atlas? Verzonden vanaf mijn iPhone met Tapatalk

hey Guys, been idle for a while, just did not have any stuff to share. Well now I bought an older Limited Custom for IPSC Standard (Large Frame) in 40 cal and 9*19 second slide. Got a great deal for 450 euros and included a speed holster, a rig and 9 magazines in both 40cal and 9MM. Now I already have a Small frame Limited Custom in 9*19 wich has mounting holes. I also got a second hand thumbrest from DAA wich i would like to mount on it so my 2 gus are alike. Maybe the resident Tanfo doctors can tell if it is possible to drill and tap 2/3 holes for the thumbrest in the leftside of the frame? Which M-diameter is used and what drill can be used? I know I need to buy a 3-step (pre-middle-finish) for the threading.

Looks like it was just announced in time for your needs ! Please let us know how it works out, i'm interested in how the clearance for the ejected brass is.

Looking at them closerr, how is the lock-up on the pads? I see no setscrew. Does it use a special base plate? If so it wont add any capacity right?

Would these fit a funnel, might be an option for my limited, nut i'm afraid the won't insert into a magfunnel?

I know a couple of IPSC shooters that run Extreme's all S3. It a fine shooter, but you can get there with a standard s3 and fit what you need Where in Europe you are at?

In their defense: they ask for the serial number so they can identify exactly what pistol you have in front of you and make sure the parts you're ordering will fit. I'm sure they've had plenty of upset customers return parts which didn't end up working, but unfortunately I think I, as well as some of the others here on this forum know more about Tanfo cross compatibility than the ladies at EAA. That being said, there is no excuse for the rush. I feel the same way when I call, it's like I'm really hassling them when I want to buy something; they can't get me off the phone fast enough. Dude you must be their nr 1 client

My GF does not get that im dooling over a CNC machine. I explained to her: When I win the jackpot, im going to buy a Haas. her: But what does it do? I can make gunparts that function!!

Yeah but then again a quinn 3 and C-more is a bitt overkill for a tuesdaynight bowlinpin match..

Well guess what...no set screws at all.. It seems that the previous owner used a red-dot and removed the sights. Tapped it out, got the windage to turn again and tapped it back. Any idea where to get those set-screws? It's pretty solid in there now but rather secure it

That above is more porn than parts!!!!!

I got no purchase with a 1.5MM hex key.. strange!

I've done most all thing on my Limited, but removed the sight (believe it to be a LPA) When I remove the elevation screw i can open it up, but I still see 2 holes, could not fit a hex-key into it? Sorry guys feel I pretty stupid!

Mrpostman, any ideas if you can make a reproduction of one of those thumbrests? Looking into it and love the idea of the angle!

I've been debating with some clubmembers to start a bowlingpin + plate local cup. I would like a red-dot to mount on my limited for fun stuff, but i am just blown away on the option out there. Im leaning to wards a (micro)-dot on a mount (as i have the option on my limited frame and keep it legal for IPSC when I remove it) Also i can run a .22 conversion with the same mount as it does not ride on the slide (not convinced on these gadgets for competition use) and keep my iron sights untouched (right?). But i would like to have the option to use the mount if ever i want to run a match in open. Soo.... what's the verdict for a mount, horizontal. Should i buy a weaver or picatinny? Option 2, I could fabricate a mock-up mount from some steel and run it for these fun matches? Lots of question I know but I'm sure you guys can chime in!

Bladetech on a Boss Hanger here also. Im not gonna win on faster draws.. Downside is that i cannot run a Gass-pedal. Im going for a DAA racemaster magnetic somewhere in time.

Put Extremes on my Limited Custom (Elite) had to open up the hole 0.5 MM to make sure the screw went straight

I ordered some parts for a match (needed some stronger springs for factory ammo) got a little scared and emailed Eric. He replyed same day and updated the the shipping to rush. France-Netherlands in two days! I don't even think I'll be ordering from tanfoglio direct, since the communication with them is a little...Italian

Can someone explain to me why this would be adressed to IPSC and no USPSA? As far i i know we can polish parts in IPSC

Got an Elite Limited payed about 800 USD (599 in euros), dropped about 250 euros in Xtreme parts (some are spares) and havent looked back yet! It runs and runs (2.5K rounds now) im updating the front sight now (thin, and green fiber) and just tuning the trigger a bit. Sure the parts are spare, but we in EU can't go to the corner store anyway, I order straight in Italy of from Eric in France and have the parts the same week. I bet you can't just go in the store for CZ custom parts also, also sometimes fitting is mandatory anyway. Don't be scared by the unicorn stories. They are value, damn sexy and shoot straight! I got all the help and more from these guys here on BE and will do my fair bit myself!

Tanks BB! I looked into the manny, but i does not seems locally available here in Cont Europe and the DAA I can pick -up locally. Ill ask Saul when I see him on a Dutch match. maybe he can give me a sample loaner to see if my Tanfo retains solid and releases smooth