Ssanders224

Got it. Push/Pull tool works for me. You do need to open the group to modify it. Go to the Edit Menu, Group, Edit Group. I had to go several groups in to get to the target. Then push the A zone in and delete the A and the X from the back of the target. Got it, thanks. I think deleting the X on the back was the problem.

Does the model you are using have a 3D or 2D target? If it's 2D just select the A zone and hit delete. If it's 3D you need to push the A zone so that it's even with the back of the target. Do you have a link to the template you are using? It is the one referenced by Mark R earlier in this thread. http://sketchup.google.com/3dwarehouse/details?mid=647f9766d975024cb68ea726c22699a&prevstart=12

Use the "Push/Pull" tool to push the "A" zone through the target. Not working for me. If I draw a rectangle around the A, I can push that shape through the target, but it does not result in a window.

What is the best way to remove the "A" zone from one of the targets in the Sketchup template? To create a window like in Kitas real stage.

If Bobby is building complete guns in 2-3 weeks, sighn me up! Ha.

They are shipping orders out everyday! I don't think it is quite 12 weeks on 115 & 124 right now. 147 probably is though. The are slammed with orders for sure!

When they will take a Dawson magwell, and drop in SV trigger I'm in!!!

My MTAC has been fantastic. The center dot is a bit too big for me to give the scope 10 stars, but that is my only complaint.

As another SDB user, I kind of wondered why they didnt offer different dies as well. It is a very popular press, you would think Dillon, or another manufacturer would offer undersized dies.

I guess it's just a coincidence then that these started to suck when I got a new barrel....???? Like I said, I'm not questioning the quality of the bullets. They shot accurately out of this gun before the barrel was replaced. Rather, I am looking for advice on what differences in the barrels could have caused this change, and what changes to the load might be needed to adjust to those differences.

The use of the "No gap" magwell and basepads together eliminates the overinsertion problem. It is part of the design. the bevel on the basepad will come into contact with the magwell, and prevent overinsertion.

Thanks, i will try playing with OAL. However, in doing so I will have to vary my powder charge.....

I didnt intend for this to be a discussion on Xtremes quality. Like I said, I have had great luck with their bullets in 9mm and .40 over the past year. I posted here to try and find advice on why the same Xtreme plated load would have shot well out of my old AET, and is now tumbling out of my new Ultimatch. Hopefully I can taylor the load to achieve good results and not have to change the components.

Well, my experience has been the opposite. My AET shot the Xtremes really well...... my new conventional Ultimatch is tumbling them.

I'm loding Alliant American Select. Its very clean, feels nice, and meters well in my press.

180gr Xtreme Plated 4.8gr American Select powder 1.185" OAL 170pf, clean, and feels nice. I'm really going to be dissapointed if I have to stray away.

I've been shooting Extremes for almost a year now in 9mm and .40. I have had zero issues with them until now. Sizing has always been perfect. I measured twenty 180gr .40s last night, and all were exactly .400". Like I said, they shot very well out of my previous barrel, and were fairly accurate.

So I got my Bedell limited gun in last week. I thought everything was good to go until I looked at my targets today. About 1 out of every 3-4 shots keyholed through the target! I'm shooting 180gr Xtreme plated bullets at 1.185". Only crimping to about .423"-.422". Out of a Schuemann ultimatch The loads were developed for the Schumann AET that was in my gun originally. They shots great. Anyone have any advice??

Haha, no no.... I don't take reloading THAT seriously. Its just a workbench with granite colored Formica over plywood. Shot the gun some this weekend. It's a little finicky on feeding right now, but seems to be getting smoother and smoother the more I shoot it. However, I'm bummed to find out that my .40 loads are tumbling out of the new barrel!? The gun originally had an Scurmann AET, and shot my Xtreme plated bullets very well. The new barrel is a regular Schuemann Ultimatch, and now my loads are tumbling.... Very frustrating.

Got it! Very pleased with it. Everything seems to be perfect.

Going to bring it to Magnolia sometime??

Pics and specs!!!

I'll assume you have used both the Racer and Racemaster then? Cool factors aside, I'd love to be enlightened on the actual functional/mechanical differences between the two.

DAA Racers all the way. Ive never used the aluminum Racemasters, and honestly do not see the need to spend the extra coin on them.

Thanks. Yea I'm pretty stoked!