Rolex

MODS CLOSE- Please- I found one- thanks to all.

I have owned sigs since the 229 came out- and as a past armour for sig- ill never sell mine- or the 320

Any one have an extra Romeo 1 they picked up but don't need? I know- LOL on this one

Been there done that- thank you

To shoot production- don't you have to buy the shorter mags from sig to fit the box? And remove the mag well?

I have been on Enos for a while- and never have I had the urge to tell someone looking for info things like you. Sorry you took the time to answer. Thanks any way.

Just picked up the X-Five. Other than shooting it- has any one changed out the GR or spring for their minor loads?

Yes the mag catch hole is low. But I won't touch it. Its a NEW 140.00 mag. Back it goes Monday.

Sarge- send you a PM- with info STI DVC ,9mm open gun Prefer to keep names out- or i'll be chastised

Move please if this is in wrong post: Just received a new -major name mag- 140 9mm. Has to be slammed into gun. And mag catch will not lock it into place. Have to push up on mag to catch. Also extremely tight in grip of gun when it does seat re: absolutely no front to back or side to side movement. Other mags from this company and another all work flawlessly. Have sent info to that company have not yet received a reply. Am I missing something? It's my open gun.

I had to retension my extractor- should be 25-28oz pull if you have the weigand setup. Mine works flawless after it was retensioned- ejects at 300-

SS is the division I am all set in- LOOKS like this setup can be used in open, limited,carry optics and production- Correct?? Thanks

This looks to be legal in production- anyone have the correct answer-

No. Lots of shooters using it with the same 124 JHP-

Sarge, Silhouette 8.0grs.

Dam spell check.

All the oal's feed. But the problem came when I had to eject a live round after the cof ended. The long line did not want to celebrate our easy. And STI recommend 1 160 OAL.

I started to have ammo issues yesterday at a match- FTF- when I got home I found the ammo I had loaded the day before to be as long as 1.178 oal my setup is for 1.160 oal. I readjusted today and checked 100 rounds- anywhere from 1.155- to 1.167 oal- Is this to much of a difference Open DVC- 9mm 124 JHP and CMJ.

Both of mine do- one is just a little tighter in the gauge than the other-

Grams springs/followers and TTi base pad- 26 if you use as supplied from STI-

i have 2 of the NEW STI mags- replaced the inside with Grams- hold 29 rounds! No spacers in the new ones- and if it matters they have witness holes - have run both mags in 4 matches so far- every bit as good as my MBX mags-

Read that one- most recent- 7.5 will be my start load- Thank you

DVC open 9mm here- second one actually- had another 8 years ago, I buy 9mm once fired and cleaned for 30,00/1k- and people at matches pick up brass with those nut pickers- looking for their 38s- then leave all the 9mm, 40 and 45 on the tables! So I also get some of that-

Looking at all the search engine topics- LOOKING for open 9mm and using Silhouette powder. And 124 JHP - Zero, MG. or PD bullets. I have some loaded at 7.3 and 7.5gr at 1.160-1.165 oal. These will chrono tomorrow. Just wondering if your loads are a little more powder- like 7.8 to 8.0gr. Thanks

Yes- those loaders do hang up on every round loaded- just wont work- BUT- my two 170 new style mags hold 28 rounds with the Grams follower/spring and the TT base pads- AND both run fine- in 4 matches as of 6/24/17