Rolex

Use SRP with the 45 acp and small primer hole.

Those look cool, do you know if they are planning on selling .40 mags? They just have 9mm ones on their site. any one try these mags yet??

and I am waiting for one!!

You have to use the G4 slim line from LW or Glock G4- housing

the sights are going to be installed by the outfit cutting the slide- thanks for your photo

Yes- I built one with my G35 top end- have shot two USPSA matches with it- shootes and points better than a stock Glock frame.

Will do thanks. And I know your frustration

Sent my Glock slide out for an RMR cut. What aftermarket rear sight will now fit? Because the cut come very close to the stock dovetail!

TTI- I received the 5 new pads from you- installed them on the new gen 4 Glock mags- did the follower mods- and all 5 now hold 20 rounds- and that reloadable. And when installed on my gen 3 9mm Glock mags I get 23 rounds- after I did the follower mods. Thank you!

Had the same problem this summer- changed everything with new parts- except mag springs- same thing- no go- put in new mag springs- problem went away- gun has been running great since.

Just received 5 new TTI base pads- all my G4 .40 mags hold 20 with a little to spare. And my .9mm G3 mags hold 23 rounds- for my open G17

I use a LW conversion 40-9 barrel I have been shooting this set up both as a 9 and 40 for 3 years- I feel nothing except if I am shooting 9 or 40 major

and my Dawson base pads hold 20 reloadable! Just like my TTI red one's better-

STRANGE- I have removed almost all of the material Dawson has shown- I have extra followers- and still only get 18! What number followers do you have- mine look like 6 or 9? Also how new/old are you TTI base pads?? Are you using an uplula? Yes- TTI informed me he has changed the inside dimensions of his NEWER base pads due to a change in the gen 4 Glock .40 mags. I am waiting to hear back from TTI on these-

STRANGE- I have removed almost all of the material Dawson has shown- I have extra followers- and still only get 18! What number followers do you have- mine look like 6 or 9? Also how new/old are you TTI base pads??

change it to a 9mm barrel and carver 4 port comp- shoot major

I noticed that the nw springs from TTI are larger diameter that the ones I have from Dawson- I changed them out- with the Dawson springs and the TTI base pads I now get 20 in the mags?

5 NEW Gen 4 mags- today- only get 18 rounds in- with the follower re do?

Because we all cant afford custom open guns- made my open G17 myself-

USPSA says yes also.

Question: is a Timber Wolf frame with A Glock 35 top end leagel in uspsa limited division?

I had to increase my loads- PF 178 now- Carver 4 port comp bleeding off to much gas- no more issues. ISMI recoil spring=11 pounds, SJC 90 degree mount, CMore

I use the SJC CMore 90 degree mount- and the LW slide from Carver- its milled down like .1000 of an inch- something like like that- and KKM barrel. Carver 4 port comp- my OAL with PD 124gr JHP is 1.155- they work and function just fine in all 5 mags. PF had to be bumped up to 175-180 because the gas was bleed off so much with this comp- Carver 3 port worked at much lower PF- 160! But I had more muzzle flip- so I stayed with the 4 port Carver. Either LW or KKM will handle the PF loads- and unless your some kinda super marksmen- you'll never be more accurate than either barrel-

thanks all-

So I really do not need a crimp die when using the Forested two die 300 blk dies? I will be using Hornady 125gr SST heads.