Loves2Shoot

They are about the same length front to back as the stock pads we have and they do fit in the box.

As posted above, just address it to yourself and you are well within the law.

http://shop.springerprecision.com/product.sc?productId=245&categoryId=25 Here it is folks. We made some retaining plates for those who have the new el cheapo plastic square retaining plates so they can use our fancy new basepads. As with all our other basepads, you have custom laser engraving options. They start at $17.50 (includes the retaining plate when you select the square retainer option.)

Can you post a photo of what you are referring to?

Our version will make the 16's, 17's, and 18's all the same length.

Yes, you can order the CZ 16 round pads and tells us in the notes section that you want them for the GP6/K100 and we'll get the right ones to you. We have a batch at anodizing, so they should ship early next week if you order more than a few of each color.

Did he use a kit or get a trigger job from our custom shop? The lighter the trigger spring pressure, the lighter the reset "click." So if you want a 2.5# trigger pull the reset will be lighter than a 4# trigger. I have a sub 2# trigger on my personal XDM and I can feel the reset.

It is tidy the small hole is only .150" deep and the anodized large hole .300" deep. If there is interest, we can make a run specific to the GP6/K100, it is the same program just a longer depth on the drill.

We have red, blue and black. If you want silver, you can place an order with a special request on color and we can do raw silver or clear when we do a batch.

We are working on export options.

Engraving does not add to the lead time, as we do our own engraving. Thank you for your order. They will ship as soon as soon as the blue get back from anodizing, which should be early next week,

STI GP6 (Grand Power K100) base pads can be adapted from our new CZ 9mm 16 round base pads. We can drill out the smaller base pad keeper hole, and the through hole diameter is a perfect fit. They fit and look great. I'm not sure if there is enough demand to do a GP6 specific run, but they are very easy for us to adapt.

Thanks for your order!

We have the black in stock and blue are at anodizing. They should be back by the first of next week.

http://www.wilsoncombat.com/p_4602.htm

Thanks! That was our goal.

Nice photo! Your last pad is on the way to anodizing, we finished another 300 CZ pads today.

Yes. We will contact you if what you put down doesn't make sense to us.

We have had no complaints with the Deltapoint or RMR mounted on the 5.25 slides to date, and we've done a bunch of them. Can't say the same about the FF sights, but they do seem to replace them ok.

Sure, just make the notes on the order.

Not at this time. We carried Tanfo parts for a couple years and they didn't move enough to make it worth the effort.

Yes, the 18's fit in the box and these make the 16's and 17's the same length as the stock 18's.

XDM 5.25 .40.

Right but the 16 and 18 round pads say they are for CZ factory mags whereas the 17 round pays say they fit the mecgear. I assume that is who makes the new CZC mags bit you know what they said abort assuming. They look like a Mecgar basepad to me. If you have a mag and want to send it in, I can check it out for you.