Search the Community
Showing results for tags 'ts'.
Found 6 results
-
Two quick questions. First, the Shooting Sport Innovations Nitro Fin for the Tanfo apparently can be fitted for a TS. Anyone done this yet? Thoughts? Second - does anyone make reduced power mag release springs for the TS? I've been unable to locate one.
-
As I did research on what open division gun I wanted, and looked for every photo of a Czechmate I could find on the internet, I noticed that the forums here were lacking a thread specifically dedicated to images of the CZ Czechmate. If you are a Czechmate owner, let's see them photos. I'll start with my newly purchased CM I just picked up today:
-
So I couldn't find ANY info on the internet on this topic, so I'm beginning a new thread. I own a CZ 75 Tactical Sport and do all my own gunsmithing. I've done a lot of work to my gun, all of it myself. I'll attach a list at the bottom of this page. As many of you probably know, through CZ USA and CZ Custom (http://czcustom.com/CZ75SAOTrigger.aspx), you can buy a flat-blade trigger for the Tactical Sport. Pretty cool, right? Well, for dudes like me with monster hands (and/or long fingers) that trigger sits so far back in the trigger guard that my trigger finger looks like a pirate hook to get the pad of my finger tip on the trigger for the perfect "press". It had a great feel, but I can't manipulate the trigger fast enough with my finger shaped like a booger-hook, so I went searching elsewhere for custom triggers for the TS, and the ONLY place to get them (someone correct me if I'm wrong but I scoured the interwebs looking) is on the CZ UB website. For those that don't know, the CZ corporation can be broken down into three divisions that sell stuff (in regards to competition pistols): CZ UB - (Uhersky Brod) - The CZ mothership in the Czech Republic, where all the cool but hard-to-find stuff comes from. (Like the Tactical Sport Orange) CZ USA - (Kansas, USA) - The CZ distributor for the US. They import from the CZ mothership, and sell much of what CZ UB sells, but not ALL of it (or it's hard to get). CZ Custom - (Arizona, USA) - The "Custom Shop" for CZ. They do business as "Ghost Products". This shop is run by Angus Hobdell, a Grand Master and team CZ shooter and know-it-all (in a very good way). They sell much of what CZ USA/UB sells, plus many products in-house that you can ONLY get there. I've navigated this maze for many months now as I built up my Tactical Sport. So with this topic of "what comes from where" covered, the rest of this will make more sense. CZ UB's online shop sells some really cool stuff, that is ONLY available through their online shop. This includes the custom triggers I'm going to discuss. So they make several different trigger "shoes" (just the trigger itself, that doesn't affect pull weight, etc.) that are apparently designed for different hand sizes and purposes. This is RAD. STI/SVI 2011's are about the only other pistols I know of that you can find triggers designed for different ergonomics. The problem is, you have to order them through the international CZ UB site, and shipping is expensive, and more importantly (for me) was how long it would take to get to me, would the trigger get through customs, etc. Well, I jumped through the hoops and bought one, and holy crap is it worth it. So with that said, here is a link to the shop where these can be found: http://www.shop-cz.com/sporting-parts-ipsc/c-1204/ Here's what they offer, all in a variety of colors: ^This is CZ UB's Straight Trigger. Slightly Different than the one CZ Custom sells. ^This is CZ UB's "Target" Trigger. Has slightly more curve than the factory Tactical Sport trigger. ^This is CZ UB's Aluminum Trigger that is identical in shape to the stock TS trigger, just aluminum rather than polymer. ^This is the "small hands" trigger. It moves the curve of the trigger very far back in the trigger guard, so it's easily reachable for small hands. ^This is the "large hands/long finger" trigger. It has a shape like the target trigger, but moved forward to INCREASE the reach to the trigger, so that the aformentioned "booger hook" isn't an issue, and someone with longer fingers can comfortably use the pad of the finger to manipulate the trigger... like you SHOULD be doing. At the current exchange rate, these come out to about $25! Totally a deal in my book, despite paying for added shipping costs. So I went through the purchase process to get the long finger trigger, and wanted to share my experience so if anyone else out there has considered the same thing but wasn't sure about it, they could at least use my experience to know if it's worth it. So here's what I did: I went to the site, and created an account (which you must do first). I then added the trigger to the cart, and began checking out like you would at any other online shop. I used Google to check what the total was going to come out to before I placed my order. I selected "Worldwide Express" shipping, that was about $50. Considering this is the ONLY place to get these, I was willing to pay this for the trigger. The checkout process asks for everything but payment info when you "confirm" your order. In total, it came in at about $80 shipped. I immediately got an email asking for payment info through a secure online payment site. I entered all the info and hit "confirm". Several hours later (I assumed when they opened up shop on the other side of the world) I got an email confirming everything, and offering a cheaper shipping option. I replied that I did want the express shipping (assuming it would still take weeks). I got a final confirmation email, including a DHL confirmation number. This was on Wednesday, October 7th. To my astonishment, the expensive shipping I paid for was VERY fast. The trigger was at my door on Monday, October 12th. It installed into the gun perfectly. Holy crap was it worth it. It acheived exactly what I was after. In my personal opinion, it was absolutely worth the $50 shipping cost on top of the relatively cheap $25 cost of the trigger. The ONLY thing I would have done different would be to throw a few more things in the shopping cart to get the most of my $50 shipping cost. There you have it. Whether you were aware of their custom triggers or not, or knew of them but weren't sure about ordering from an international online shop, it was painless and the result was great, especially if you consider biting the bullet for $50 shipping worth it to ensure your expensive pistol has the perfect trigger for you in it. Considering my CZ 75 Tactical Sport is worth well over $2,000 at this point, it did not seem too crazy to me to spend $80 on a trigger that "fits" me perfectly... especially since there is only one place to get it. I'll get some pics posted of the finished gun soon, but for now, here's a phone pic of the trigger after I got it out of the packaging.
-
All, Looking for the TS extended wide safety that goes on the left side (for a right handed shooter). CZC is out and no timeline when they will come in. I have searched all over and can't find any alternatives. Does anyone know of another place to get it from or if there is an alternate out there? Any help is appreciated!
-
I just picked up my new/first TS today. First things I'm going to do are replace the front sight with FO and put the grip on a diet (remove checkering front and rear straps and slimmer grips). Are there any known issues? Anything you guys would say NEEDS to be done? Or is highly suggested...?
-
Hello All, I am getting the open gun hankering. I have a bone stock 9mm tactical sport I would like to turn into an open gun. I do not want to build a czechmate clone, I want to do a few things different and I need some advice from all of you: I am going to list things number here that I intend to do to the pistol so If you are listing something you would do different just type the number (eg: 3: I would do this) 1: Grip reduction. I have a Shay Akai grip reduction on another 40 cal TS I bought from a member here and it is decent. Anyone else to try? 2: Slide/Barrel Shortening. It has a 5.4 inch barrel now and after you add and inch at least of comp to this this pistol starts to get pretty long. I would like to shorten the barrel and slide, if there is a smith who can do this and if it is cost feasible. Shorten slide and barrel to 4.5" barrel, threaded for comp. 3: Along with the slide shortening scallop all extra metal off slide and port it. 4: The frame will more than likely have to be cut away at the front alone the frame rails to clear the comp and shorter barrel. 5: Large Magwell (no clue on a good on) 6: Drill and tap for mount. Any recomendations on the best mount or optic setup to use here? 7: Big safeties, mag catches, etc for my medium sized hands. 8: Flat grips with tape of course. Add in anything else you guys think I might need or like. Thanks for the help, the biggest hurdle is if its even possible to shorten the slide as I would like, If not maybe I should just give up and buy a new czechmate, but they are so long... Thanks alot! -Matt
