Z32MadMan Posted August 15, 2009 Share Posted August 15, 2009 Is it worth spending over twice as much for a CV-750 when you can get a Lyman 1200 for $55? I'm looking for a first tumbler and I go through about 200rds of 9mm a week. Link to comment Share on other sites More sharing options...
Joe4d Posted August 15, 2009 Share Posted August 15, 2009 The Dillon is cheaper than the Lyman, well it will be in about six months when you replace the Lyman. I've had 2 Lymans a Cabelas, a Midway, and a Frankford arsenal. All had the same motor. The original Midway lasted about 5 years with a couple solder jobs on the winding leads, all the others burnt the motors in less than a year, I dont think the Lyman lasted 4 months, I dont do a ton of loading, maybe run em half a day once a week. The problem with all of these is the motors are open and have a fan underneath them that basically forces all the dust and residue inside the windings. The Dillon 750 actually uses the sealed motor from the larger 2001, so far so good on that one going about 2 years now and shooting more so running about twice a week. Link to comment Share on other sites More sharing options...
Z32MadMan Posted August 15, 2009 Author Share Posted August 15, 2009 The Dillon is cheaper than the Lyman, well it will be in about six months when you replace the Lyman. I've had 2 Lymans a Cabelas, a Midway, and a Frankford arsenal. All had the same motor. The original Midway lasted about 5 years with a couple solder jobs on the winding leads, all the others burnt the motors in less than a year, I dont think the Lyman lasted 4 months, I dont do a ton of loading, maybe run em half a day once a week. The problem with all of these is the motors are open and have a fan underneath them that basically forces all the dust and residue inside the windings. The Dillon 750 actually uses the sealed motor from the larger 2001, so far so good on that one going about 2 years now and shooting more so running about twice a week. Are Dillon's tumblers covered by their lifetime warranty? Link to comment Share on other sites More sharing options...
Singlestack Posted August 15, 2009 Share Posted August 15, 2009 Are Dillon's tumblers covered by their lifetime warranty? No. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted August 15, 2009 Share Posted August 15, 2009 Hello: Dillon do sell the motor for the tumblers though. I have 2 Lyman tumblers that are still running after 2 years and a Dillon CV500 as well. You can never have too many tumblers I will be getting the Dillon big tumbler one of these days. Thanks, Eric Link to comment Share on other sites More sharing options...
larry cazes Posted August 16, 2009 Share Posted August 16, 2009 Do a search on the archives here. There is lots of info out there concerning tumblers and reliability. Link to comment Share on other sites More sharing options...
benos Posted August 17, 2009 Share Posted August 17, 2009 When I get this question I answer with something like - Dillon's tumblers are more expensive than other brands of tumblers for the same reason their presses are - they're better quality. The new sealed bearing motors in Dillon's tumblers are the shit. (As in heavy duty.) I haven't had a tumbler motor returned since the new motors. The last time I talked to Dillon about tumbler motor returns, I don't think they've had any since they switched to the new motor. be Link to comment Share on other sites More sharing options...
Sarge Posted August 18, 2009 Share Posted August 18, 2009 For what it's worth I dropped my 750 on the garage floor from chest high. After I reattached the ground wire it fired right up and is still working fine. No cracks or breaks either. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now