Chris_Andersen Posted June 12, 2009 Share Posted June 12, 2009 So I have an M&P Pro with a Storm Lake match barrel and guide rod, Mike Cyrwus Trigger etc that I have put about 4000 rounds through with no real problems (except the occasional "slam-charge" discussed on this board). I am wondering what sort of round counts everyone else has had through their gun, and if they have had any reliability issues or failures. Link to comment Share on other sites More sharing options...
High Lord Gomer Posted June 12, 2009 Share Posted June 12, 2009 So I have an M&P Pro with a Storm Lake match barrel and guide rod, Mike Cyrwus Trigger etc that I have put about 4000 rounds through with no real problems (except the occasional "slam-charge" discussed on this board). I am wondering what sort of round counts everyone else has had through their gun, and if they have had any reliability issues or failures. 34,000 through 9 (full-size, not pro). The only problem I've ever had was the mag dropping when my 11 year old shoots it with the mag release moved to the right side. I'm pretty sure his finger is hitting the release during recoil since it has never happened to me with the release on the left side. I replace the stroker assembly a couple thousand rounds ago just because. I never had a problem, I just figured it was due. I always get a "slam charge" and it always properly chambers a round. Link to comment Share on other sites More sharing options...
Chris_Andersen Posted June 12, 2009 Author Share Posted June 12, 2009 Would be great if the "slam charge" either happened all the time or not at all. It got so frequent, that I started expecting it. As soon as I did that it burned me on a couple of match stages. Link to comment Share on other sites More sharing options...
Dan Burwell Posted June 13, 2009 Share Posted June 13, 2009 (edited) My 9L has over 10k through it. One time the slide failed to lock back on an empty mag (but it was an IDPA night match and I had a flashlight in my hand so it could have been my fault.) And I recall one FTE during a practice when the gun was very dirty. That is it, I run the factory springs, still haven't changed them yet, and it just keeps on runnin. I know one of my shooters had 10k throught his PRO in the first month that was almost 9 months ago, I haven't asked him latley how many he has through it, but I know it is a load and he has not had a problem. edited to add: I cannot make my gun slam charge, but my wife can (go figure) Her 9L slam charges for her everytime and has never failed to pick up a round. Edited June 13, 2009 by Dan Burwell Link to comment Share on other sites More sharing options...
vetts1911 Posted June 26, 2009 Share Posted June 26, 2009 (edited) My M&P9 has about 12000 rounds through it over two years of shooting and the only issue I ever had was in the first 200 rounds. I had a couple of FTE's. I think that could have been a simple break in or my extractor needed a drop of oil. I got in the habbit of putting a drop of very light oil on the extractor right before a match or range time. I can say I have never had any issues. Great gun. Edited June 26, 2009 by vetts1911 Link to comment Share on other sites More sharing options...
scottrebello Posted June 26, 2009 Share Posted June 26, 2009 Todd Green from Pistol-Training.com had one with over 50K on it in the first year. S&W president fired the 50,000 shot I believe. It wasnt a Pro, this was a very early 9. Link to comment Share on other sites More sharing options...
azoutdoorsman Posted June 26, 2009 Share Posted June 26, 2009 My stock full size 9 has a little over 4k through it with one failure to feed after not cleaning it in over 1200 rounds. Once the feed ramp get grimy it slows down a bit, or so I have noticed. My M&P9 has about 12000 rounds through it over two years of shooting and the only issue I ever had was in the first 200 rounds. I had a couple of FTE's. I think that could have been a simple break in or my extractor needed a drop of oil. I got in the habbit of putting a drop of very light oil on the extractor right before a match or range time. I can say I have never had any issues. Great gun. Link to comment Share on other sites More sharing options...
kwrangln Posted June 26, 2009 Share Posted June 26, 2009 My 9Pro is at 2150 rounds right now. When I got it brand new I took it out of the box, looked it over, lubed it and went shooting. It has not been cleaned or lubed since. I had one single light strike at about round 340 with WWB, and have not had a single issue since. 0 FTF, 0 FTE, it just runs and runs and runs. I'll clean and lube it again when it has a problem or hits 5000, whichever comes first. All I've shot with it has been factory ammo, about 450 WWB, the rest being Blazer brass since it's cheap at wally world. Link to comment Share on other sites More sharing options...
G-ManBart Posted June 26, 2009 Share Posted June 26, 2009 I got in the habbit of putting a drop of very light oil on the extractor right before a match or range time. If a gun needs that, something is wrong I have put exactly 1, 149 rounds through my Pro. It has had one FTF in the first 100 rounds, one FTE (extract) at 145rds, another FTE at 360rds and the most recent FTE at 870rds. It's had nothing but factory ammo through it, Win Ranger 124gr FMJ, Fiocchi 115gr FMJ and AA&A 147gr JHP (new cases). It's had an FTE one time with each type of ammo. Lest anybody start the argument that this isn't a common problem, in one thread alone on the M&P forum, 22 different posters (at last check) mentioned 26 different guns that were experiencing FTEs, and there are plenty of other threads on the issue. While I love the way the gun indexes, points, feel etc, I obviously don't have reason to trust it yet and that's almost certainly going to require changing the extractor, tweaking the spring and/or getting the chamber polished....just haven't had time to mess with that just yet. R, Link to comment Share on other sites More sharing options...
Chris_Andersen Posted June 27, 2009 Author Share Posted June 27, 2009 I got in the habbit of putting a drop of very light oil on the extractor right before a match or range time. If a gun needs that, something is wrong I have put exactly 1, 149 rounds through my Pro. It has had one FTF in the first 100 rounds, one FTE (extract) at 145rds, another FTE at 360rds and the most recent FTE at 870rds. It's had nothing but factory ammo through it, Win Ranger 124gr FMJ, Fiocchi 115gr FMJ and AA&A 147gr JHP (new cases). It's had an FTE one time with each type of ammo. Lest anybody start the argument that this isn't a common problem, in one thread alone on the M&P forum, 22 different posters (at last check) mentioned 26 different guns that were experiencing FTEs, and there are plenty of other threads on the issue. While I love the way the gun indexes, points, feel etc, I obviously don't have reason to trust it yet and that's almost certainly going to require changing the extractor, tweaking the spring and/or getting the chamber polished....just haven't had time to mess with that just yet. R, I have never had any FTF, but I have had a few FTE or not chamber completely. Those have only been my reloads though. As I am fairly new to reloading, I had been chalking it up to that. I have been running close to the lower limits of PF and changing springs periodically as well. I have now gone back to the factory spring weight and it seems to be better, also upping the power factor to 130. I expect that cant hurt either. Link to comment Share on other sites More sharing options...
Pdoyle Posted June 27, 2009 Share Posted June 27, 2009 GOt a M and P when the first came out. At least 40 K through it. Instructor gun and competition gun. Almost all ammo is AA 115 andn 147. Some military NATo rounds and GOLD DOTS as well. I have have no problems with it other than the slide cracked. Called S & W and had brand new slide in one day. Have a 9L with maybe 4-5 K through it. Love these guns so far. Pat Link to comment Share on other sites More sharing options...
dcarter Posted July 8, 2009 Share Posted July 8, 2009 I have 40K plus through my M&P9 and about 9K through my 9L with no issues at all. I'm running 147's with factory springs. Link to comment Share on other sites More sharing options...
Jeff9mmM&P Posted August 12, 2009 Share Posted August 12, 2009 (edited) I have 5k through my FS M&P. The striker broke recently and S&W mailed me a new one for free. I also started to get death jams with it with all types of ammo. Got it back from S&W last week and they polished the chamber and replaced the extractor. Shot it last weekend and it is running great again. Edited August 12, 2009 by Jeff9mmM&P Link to comment Share on other sites More sharing options...
Sarge Posted August 12, 2009 Share Posted August 12, 2009 Around 4500 or so and been to S&W to fix FTE issues already. Thanks for dredging that up! Link to comment Share on other sites More sharing options...
B_Seehawer Posted August 12, 2009 Share Posted August 12, 2009 Only about 500 rounds through mine so far. Had one FTE in the first 100 rounds, took it home, polished the chamber and feed ramp, never had a problem since. ganderman Link to comment Share on other sites More sharing options...
cyclone336 Posted August 12, 2009 Share Posted August 12, 2009 I have shot about 5000 rounds through my M&P9. I initially had 6 failures to extract in the first 300 rounds, all with Fiocchi ammo. I probably had an additional 4 failures to extract in the next 600 rounds using WWB and Remington ammo. At about 1000 rounds, I changed the recoil spring to 13 lbs. (for other reasons) and I haven’t had any more failures to extract. At about 2000 rounds I had one failure to feed, but I have a feeling that it was user induced (I probably pushed my right thumb against the slide during the recoil of the previous round). I also have “shot” the pistol at least 20,000 times during dry fire practice, so I have broken two strikers. One failure occurred 7 months after I bought the gun, and the other failure came 7 months after that. However, even with all these problems, I still love the pistol and completely trust it for local matches. (Although perhaps I would change my tune if I shot major matches or had to trust it with my life.) Link to comment Share on other sites More sharing options...
Dan Burwell Posted August 12, 2009 Share Posted August 12, 2009 I found out a few weeks ago one of my good friends has been averaging 2,000 rounds a week through his 9PRO since February. He has broken the trigger return spring twice in that time, one slide stop, and talking to him last night he somehow managed to melt the fiber rod in the front sight??? He said he ran a few mags through it fairly quickly and it "felt a little warm" So doing some quick and probably lousy math that would be 54,000 rounds since feb. This is the same guy who had 10K through it in the first month. So he likely has 75-90K through his already since he got the gun last year about this time. Link to comment Share on other sites More sharing options...
jkatz44 Posted September 15, 2009 Share Posted September 15, 2009 I found out a few weeks ago one of my good friends has been averaging 2,000 rounds a week through his 9PRO since February. He has broken the trigger return spring twice in that time, one slide stop, and talking to him last night he somehow managed to melt the fiber rod in the front sight??? He said he ran a few mags through it fairly quickly and it "felt a little warm"So doing some quick and probably lousy math that would be 54,000 rounds since feb. This is the same guy who had 10K through it in the first month. So he likely has 75-90K through his already since he got the gun last year about this time. 8000 rounds Link to comment Share on other sites More sharing options...
Sarge Posted September 15, 2009 Share Posted September 15, 2009 (edited) I found out a few weeks ago one of my good friends has been averaging 2,000 rounds a week through his 9PRO since February. He has broken the trigger return spring twice in that time, one slide stop, and talking to him last night he somehow managed to melt the fiber rod in the front sight??? He said he ran a few mags through it fairly quickly and it "felt a little warm"So doing some quick and probably lousy math that would be 54,000 rounds since feb. This is the same guy who had 10K through it in the first month. So he likely has 75-90K through his already since he got the gun last year about this time. AD Edited September 15, 2009 by sandman Link to comment Share on other sites More sharing options...
levi333 Posted September 15, 2009 Share Posted September 15, 2009 Just passed 1k rounds through my Pro this weekend on my first USPSA classifier. Zero gun related problems so far, it's completely stock, and hasn't even been cleaned yet... I'm very happy with this gun. Link to comment Share on other sites More sharing options...
JeffWard Posted September 15, 2009 Share Posted September 15, 2009 Polished chamber, 13lb spring, SS guiderod. Zero issues since chamber work. 200 rounds per week since... November. 800 per month X 10 months. I'd guess 7000-8000 rounds. Runnin' like a top. I'll probably change the striker at 10,000, since I dry fire some, and they're known to fail on occasion. Change the recoil spring too. Jeff Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now