pierce195 Posted April 12, 2007 Share Posted April 12, 2007 Will factory UMC 115 9mm make minimum power factor in a glock 34? Link to comment Share on other sites More sharing options...
Jman Posted April 13, 2007 Share Posted April 13, 2007 Will factory UMC 115 9mm make minimum power factor in a glock 34? Using there data I come up with a 130.5 PF from a 4" barrel. You should be fine. http://www.remington.com/products/ammuniti...istol&cal=6 Jim Link to comment Share on other sites More sharing options...
Bryan W Posted April 13, 2007 Share Posted April 13, 2007 Yes, it will make it a G17 as well. You should be good to go. Link to comment Share on other sites More sharing options...
pierce195 Posted April 13, 2007 Author Share Posted April 13, 2007 Thanks for the info. Link to comment Share on other sites More sharing options...
pierce195 Posted April 14, 2007 Author Share Posted April 14, 2007 It made 136 power factor at the SC match today. Link to comment Share on other sites More sharing options...
XD Niner Posted April 16, 2007 Share Posted April 16, 2007 That seems to be about right for similar 9mm factory ammo. I get almost that same PF with Winchester White Box and CCI Blazer Brass 115 grain FMJs in my 5" XD-9 Tactical. Link to comment Share on other sites More sharing options...
jostein jensen Posted April 16, 2007 Share Posted April 16, 2007 at our club we are very unsatisfied with that ammo. It was very inaccurate in all our club G17's. Cheap compared to a few other alternatives we had, but it was not worth the lower cost.. Link to comment Share on other sites More sharing options...
pierce195 Posted April 16, 2007 Author Share Posted April 16, 2007 I just completed the SC Section Match with this ammo. I had four misses, but three were my fault for not even taking a shoot at the target. For the the price I paid I am over all happy with this ammo from my G34. Link to comment Share on other sites More sharing options...
Flexmoney Posted April 16, 2007 Share Posted April 16, 2007 So...what did it chrono out of your G34 at the match ? What weight did the bullet come in ? Link to comment Share on other sites More sharing options...
Chuck Anderson Posted April 16, 2007 Share Posted April 16, 2007 I used Rem UMC 115 gr for the 2005 and first half of the 2006 season. I had zero problems with it, and did fairly well at the 05 Nats in Production. The only reason I switched was the Atlanta Arms 147 gr is a lot softer. It worked great for me. Link to comment Share on other sites More sharing options...
Fireant Posted April 16, 2007 Share Posted April 16, 2007 They did not pull a bullet and weigh it this year. They took your word for the weight. They did look puzzled when I said 200 grs. for mine...then I remembered I was shooting open and not limited We got it worked out though. Link to comment Share on other sites More sharing options...
HoMiE Posted May 23, 2007 Share Posted May 23, 2007 Rem UMC 115 FMJ avgeraged 1170 out of my G34, that is about 135 PF. Link to comment Share on other sites More sharing options...
Lee Bell Posted May 23, 2007 Share Posted May 23, 2007 That seems to be about right for similar 9mm factory ammo. I get almost that same PF with Winchester White Box and CCI Blazer Brass 115 grain FMJs in my 5" XD-9 Tactical. I've found Winchester to be slightly hotter than the Remington UMC. Both will make minimum PF in my XD 9 Tactical and probably would in an XD 9 Service. Neither consistently makes minimum in my XD 9 SC. Since I'm really unlikely to shoot a 3 inch barrel XD when I have a 5 inch barrel one, it does say something about the reduced effectiveness of my carry gun. If I ever have to use it, I'll let you know if the effect was significant . . . I hope. Lee Link to comment Share on other sites More sharing options...
halvey Posted May 23, 2007 Share Posted May 23, 2007 I've had some of this leftover from a couple years ago. It didn't seem THAT much worse than WWB, but I didn't rest the gun either. Link to comment Share on other sites More sharing options...
jsneff Posted June 20, 2007 Share Posted June 20, 2007 I had really bad results with the Remington UMC. Shot almost 7" @ 25 yards out of my 226. WWB shot just over 3" Also the OAL is short and the powder is dirty. I'll pass! Link to comment Share on other sites More sharing options...
Chuck Anderson Posted June 20, 2007 Share Posted June 20, 2007 I had no problem getting sub 3" groups out of several different Glocks with this ammo. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now