NCJammer Posted September 2, 2020 Share Posted September 2, 2020 Does anyone know if there is an optics plate available for the P10F or Shadow 2 OR for the Romeo 3XL? Link to comment Share on other sites More sharing options...
ck1 Posted September 2, 2020 Share Posted September 2, 2020 R3XL is a no-go on a Shadow 2 OR, the footprint is too big (too long at the front of the sight). I don’t have a P10 so I’m not sure, but P10’s and S2OR’s use the same plates, so unless someone can chime in saying otherwise, pretty sure an R3XL would be a no-go on a P10 too. Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted September 2, 2020 Share Posted September 2, 2020 Can’t you just get the slide milled a little longer out the front ? or is there a mechanical issue that can’t be done ? Link to comment Share on other sites More sharing options...
shred Posted September 2, 2020 Share Posted September 2, 2020 There's not much room at the front of the optic cut on an OR (there's more at the back), but maybe enough. Easier would be taking a little off the front of the scope. There's not much there besides the locating pins and you can use the RTS divots further back for that. Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted September 2, 2020 Share Posted September 2, 2020 That sounds easy. Only issue would be warranty I guess. Link to comment Share on other sites More sharing options...
skip62 Posted December 13, 2020 Share Posted December 13, 2020 (edited) I have a P10F OR, and was hoping I could make the Romeo 3 Max work, but you can't cut the slide any further forward because you would risk weakening the breachface, at least you couldn't cut enough for the Romeo 3 Max. Cutting the sight you are definitely into the holes and risk weakening the front where the glass. Not saying you couldn't, but I'm not spending $600 and screw any chance of warranty. As far as I've found, you would have to get a non-OR and have it milled. For those of you that say just get a different sight. I haven't seen one that I thought was this good, the dot is super bright, the window is just the right size, the adjustments are pretty good, not RTS2 good, but definitely better than an SRO. No distortion in the glass like the SRO. It's always on. If Sig would just make something that would fit, doesn't even fit any of their own guns. Crazy. Edited December 13, 2020 by skip62 make it more clear Link to comment Share on other sites More sharing options...
Posvar Posted December 14, 2020 Share Posted December 14, 2020 22 hours ago, skip62 said: I have a P10F OR, and was hoping I could make the Romeo 3 Max work, but you can't cut the slide any further forward because you would risk weakening the breachface, at least you couldn't cut enough for the Romeo 3 Max. Cutting the sight you are definitely into the holes and risk weakening the front where the glass. Not saying you couldn't, but I'm not spending $600 and screw any chance of warranty. As far as I've found, you would have to get a non-OR and have it milled. For those of you that say just get a different sight. I haven't seen one that I thought was this good, the dot is super bright, the window is just the right size, the adjustments are pretty good, not RTS2 good, but definitely better than an SRO. No distortion in the glass like the SRO. It's always on. If Sig would just make something that would fit, doesn't even fit any of their own guns. Crazy. Agreed and it is frustrating. That little bit out front is tough to work around on most guns. Link to comment Share on other sites More sharing options...
Posvar Posted December 14, 2020 Share Posted December 14, 2020 On 9/1/2020 at 11:37 PM, NCJammer said: Does anyone know if there is an optics plate available for the P10F or Shadow 2 OR for the Romeo 3XL? One option is to grab an extra S2 slide as they do come up for sale here often. Last week I saw one for sale already cut for a Romeo3 Max/XL. I think it was for sale on Facebook. Link to comment Share on other sites More sharing options...
Jeff O Posted March 29, 2022 Share Posted March 29, 2022 On 12/13/2020 at 1:47 PM, skip62 said: I have a P10F OR, and was hoping I could make the Romeo 3 Max work, but you can't cut the slide any further forward because you would risk weakening the breachface, at least you couldn't cut enough for the Romeo 3 Max. Cutting the sight you are definitely into the holes and risk weakening the front where the glass. Not saying you couldn't, but I'm not spending $600 and screw any chance of warranty. As far as I've found, you would have to get a non-OR and have it milled. For those of you that say just get a different sight. I haven't seen one that I thought was this good, the dot is super bright, the window is just the right size, the adjustments are pretty good, not RTS2 good, but definitely better than an SRO. No distortion in the glass like the SRO. It's always on. If Sig would just make something that would fit, doesn't even fit any of their own guns. Crazy. Had a non OR milled for an XL. Love it. Link to comment Share on other sites More sharing options...
Posvar Posted March 29, 2022 Share Posted March 29, 2022 21 minutes ago, Jeff O said: Had a non OR milled for an XL. Love it. Awesome. That’s my jam. That or the FTP Alpha3. Link to comment Share on other sites More sharing options...
Jeff O Posted March 29, 2022 Share Posted March 29, 2022 26 minutes ago, Posvar said: Awesome. That’s my jam. That or the FTP Alpha3. I do not want to have to remove the optic to change the battery Link to comment Share on other sites More sharing options...
Posvar Posted March 29, 2022 Share Posted March 29, 2022 17 minutes ago, Jeff O said: I do not want to have to remove the optic to change the battery Not sure what you are referring to but you don't with the RTS2, FTP Alpha3, or Sig Romeo 3 Max/XL. Link to comment Share on other sites More sharing options...
Jeff O Posted March 29, 2022 Share Posted March 29, 2022 Sorry thought you did on the FTP, but the price on it has come up so much it's not a bargain anymore. Link to comment Share on other sites More sharing options...
Posvar Posted March 29, 2022 Share Posted March 29, 2022 1 minute ago, Jeff O said: Sorry thought you did on the FTP, but the price on it has come up so much it's not a bargain anymore. There are coupons, etc. Even saving $150+ makes it a great value. That and the fact that they do not fail often like the Sig optics are known to. I have an XL on my open guns but prefer the FTP for mounted on a slide. Link to comment Share on other sites More sharing options...
Jeff O Posted March 30, 2022 Share Posted March 30, 2022 16 hours ago, Posvar said: There are coupons, etc. Even saving $150+ makes it a great value. That and the fact that they do not fail often like the Sig optics are known to. I have an XL on my open guns but prefer the FTP for mounted on a slide. Where is the best place to buy one? Link to comment Share on other sites More sharing options...
Posvar Posted March 30, 2022 Share Posted March 30, 2022 7 minutes ago, Jeff O said: Where is the best place to buy one? The FTP? On their website (click on the USA one). He may offer a code for Enos members now and I am pretty sure he does. They are sold out until June I think. Well worth the wait! Link to comment Share on other sites More sharing options...
Jeff O Posted April 4, 2022 Share Posted April 4, 2022 Link to comment Share on other sites More sharing options...
Jeff O Posted April 4, 2022 Share Posted April 4, 2022 Link to comment Share on other sites More sharing options...
Jeff O Posted April 4, 2022 Share Posted April 4, 2022 Done by ZRTS Noblesville, IN inf@zrtacticalsolutions.com 317-721-9787 My go to guy. Does AWESOME work. Link to comment Share on other sites More sharing options...
Posvar Posted April 4, 2022 Share Posted April 4, 2022 2 minutes ago, Jeff O said: Get the slide milled for it? Link to comment Share on other sites More sharing options...
Posvar Posted April 4, 2022 Share Posted April 4, 2022 Just now, Jeff O said: Done by ZRTS Noblesville, IN inf@zrtacticalsolutions.com 317-721-9787 My go to guy. Does AWESOME work. Oh nice. Looks good. Link to comment Share on other sites More sharing options...
Jeff O Posted April 4, 2022 Share Posted April 4, 2022 4 minutes ago, Posvar said: Oh nice. Looks good. Looks like a big screen TV on the gun! Link to comment Share on other sites More sharing options...
Posvar Posted April 4, 2022 Share Posted April 4, 2022 4 minutes ago, Jeff O said: Looks like a big screen TV on the gun! That's what we need!!!!!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now