jcm Posted March 10, 2020 Share Posted March 10, 2020 I have tried to find the answer but not having much luck. Will the TTI +5 base pads on 17 round P320 X5 Legion mags fit the 140mm USPSA gauge? I realize the mag tubes themselves could vary, causing the OAL to exceed 140mm BUT what is everyone else's experience? Link to comment Share on other sites More sharing options...
Armedinmd Posted March 10, 2020 Share Posted March 10, 2020 I have read the answer to be yes, but before you compete to check each mag. Link to comment Share on other sites More sharing options...
B585 Posted March 10, 2020 Share Posted March 10, 2020 7 hours ago, Armedinmd said: I have read the answer to be yes, but before you compete to check each mag. This. Most of my bone stock 21 rounders don’t fit the gauge without a little dremel work. Link to comment Share on other sites More sharing options...
ClangClang Posted March 10, 2020 Share Posted March 10, 2020 If you are planning on going to Majors and therefore going through chrono, you have to gauge every mag and basepad. Period. There is a significant amount of variance on the length of the magazine tubes. This is true for every mag tube brand I've ever dealt with. Cutting and folding sheet metal is not a particularly precise process. Machined aluminum basepads are almost always perfect. It's the tubes that change. 17 round tubes with a TTI +5 should fit the gauge. But some tubes are too long. 21 round tubes with a TTI +2 (or Springer +2) should fit the gauge. But some tubes are too long. See the pattern? If you have tubes that are too long, you can file the feed lips, hammer the bottom lips (see the Atlas mag tuning video on their YT channel) or sell the tubes and buy new ones. Ideally, don't sell them here, sell them on some other tactical timmy forum where people don't care about 0.5 mm differences on their mag tubes. Link to comment Share on other sites More sharing options...
streckjc Posted March 12, 2020 Share Posted March 12, 2020 (edited) As Clang says, you should check each and every mag on the gauge. Just because the website states it fits the requirements, there are manufacturing variances that we all got hit in the face with on the 21 round X5 mags. The $20 or whatever the gauge costs from BSPS or Springer is worth it to not get DQ'd at a major or moved up to Open for bad mags. Henning's +6 states it's legal, but I'll be checking each one after I assemble them just to be sure. Edited March 12, 2020 by streckjc wording Link to comment Share on other sites More sharing options...
Armedinmd Posted March 13, 2020 Share Posted March 13, 2020 I just picked up my X5 and if I do any serious competing I will definitely buy the gauge. Thank you for letting me know where and the price. Link to comment Share on other sites More sharing options...
eboadway Posted March 14, 2020 Share Posted March 14, 2020 They run about $35 at most places. Let me know if you find them cheaper. Link to comment Share on other sites More sharing options...
JFoley001 Posted March 22, 2020 Share Posted March 22, 2020 I think the real question is whether purchasing the base pads gets you a ticket to see the precious? Link to comment Share on other sites More sharing options...
Armedinmd Posted March 22, 2020 Share Posted March 22, 2020 5 minutes ago, JFoley001 said: I think the real question is whether purchasing the base pads gets you a ticket to see the precious? I heard that you just call them and ask. If they say no you just keep asking. Then eventually they say ok. Link to comment Share on other sites More sharing options...
JFoley001 Posted March 22, 2020 Share Posted March 22, 2020 Just now, Armedinmd said: I heard that you just call them and ask. If they say no you just keep asking. Then eventually they say ok. My dude! Will try first thing Monday AM. Link to comment Share on other sites More sharing options...
KindredGhost Posted March 22, 2020 Share Posted March 22, 2020 4 hours ago, Armedinmd said: I heard that you just call them and ask. If they say no you just keep asking. Then eventually they say ok. HAHAHAHAHAH You guys are savages... lol kg Link to comment Share on other sites More sharing options...
TravisB_02 Posted March 28, 2020 Share Posted March 28, 2020 I just got my DAA mag gauge and saw this thread. So thought I'd share my experience. I have 4 Legion mags with the tti +5. You have to push so hard and it's still not perfect so I'd say all 4 of my mags fail. Or right on the edge of not wanting to risk it. As mentioned though it could be filed down with very minimal effort. With my mag gauge I ordered 3 of the henning +6 since I liked the squared front. And those fit the gauge with some tolerance. The Hennings are expensive and dont include a spring. But with the factory spring and fallower I was able to fit 23. With good spring tension on the last round. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now