B_RAD Posted January 22, 2019 Share Posted January 22, 2019 I have one but can't remember who made it. I want to order more. The replace the locator pin. Thanks. Link to comment Share on other sites More sharing options...
teros135 Posted January 22, 2019 Share Posted January 22, 2019 Reloading Innovations Spill Stop? Link to comment Share on other sites More sharing options...
ChuckS Posted January 22, 2019 Share Posted January 22, 2019 https://reloadinginnovations.com/ and Ralph has a product now also: https://www.arredondoaccessories.com/product/shell-stabilizer-3/ Link to comment Share on other sites More sharing options...
B_RAD Posted January 22, 2019 Author Share Posted January 22, 2019 13 minutes ago, teros135 said: Reloading Innovations Spill Stop? Yes. Thanks. Link to comment Share on other sites More sharing options...
B_RAD Posted January 22, 2019 Author Share Posted January 22, 2019 11 minutes ago, ChuckS said: https://reloadinginnovations.com/ and Ralph has a product now also: https://www.arredondoaccessories.com/product/shell-stabilizer-3/ Thanks. Link to comment Share on other sites More sharing options...
NickG013 Posted January 22, 2019 Share Posted January 22, 2019 So I have these on my 650. They really help with powder spillage. I just started running into an issue though with them. All three on my press are on the left side of the shell plate. That ends up putting pressure on the left side of the shell plate and ever so slightly pushes it to the right. Not a huge deal except every once in a while, my primers will flip sideways because the plunger for the primer is slightly out of line. If I remove these spill stops, I don't have issues with primers flipping. Link to comment Share on other sites More sharing options...
B_RAD Posted January 22, 2019 Author Share Posted January 22, 2019 22 minutes ago, NickG013 said: So I have these on my 650. They really help with powder spillage. I just started running into an issue though with them. All three on my press are on the left side of the shell plate. That ends up putting pressure on the left side of the shell plate and ever so slightly pushes it to the right. Not a huge deal except every once in a while, my primers will flip sideways because the plunger for the primer is slightly out of line. If I remove these spill stops, I don't have issues with primers flipping. You might be able to just get away with using one at the powder station. Once you get a case in that station it should smooth out the index. Link to comment Share on other sites More sharing options...
tha1000 Posted January 22, 2019 Share Posted January 22, 2019 42 minutes ago, NickG013 said: So I have these on my 650. They really help with powder spillage. I just started running into an issue though with them. All three on my press are on the left side of the shell plate. That ends up putting pressure on the left side of the shell plate and ever so slightly pushes it to the right. Not a huge deal except every once in a while, my primers will flip sideways because the plunger for the primer is slightly out of line. If I remove these spill stops, I don't have issues with primers flipping. I would think that you would really only need one if you are running a bullet feeder... possibly two if setting the bullet by hand. 3 would serve no purpose. I have the arrendondo solution, I have not had any issues with the primers getting flipped. Link to comment Share on other sites More sharing options...
NickG013 Posted January 22, 2019 Share Posted January 22, 2019 24 minutes ago, B_RAD said: You might be able to just get away with using one at the powder station. Once you get a case in that station it should smooth out the index. 4 minutes ago, tha1000 said: I would think that you would really only need one if you are running a bullet feeder... possibly two if setting the bullet by hand. 3 would serve no purpose. I have the arrendondo solution, I have not had any issues with the primers getting flipped. I can't remember if I've tried only one or not. I may have to try that when I get home to see if it does the trick. Link to comment Share on other sites More sharing options...
chevrofreak Posted January 23, 2019 Share Posted January 23, 2019 Go with the Arredondo. My Reloading Innovations ones would work themselves up and out of the hole as they rotated. Link to comment Share on other sites More sharing options...
Dirtchevy841 Posted January 29, 2019 Share Posted January 29, 2019 On 1/22/2019 at 3:11 PM, tha1000 said: I would think that you would really only need one if you are running a bullet feeder... possibly two if setting the bullet by hand. 3 would serve no purpose. I have the arrendondo solution, I have not had any issues with the primers getting flipped. Thomas you running the 9mm one on the 650 with 40 or just 9mm. I seen he just had the 9mm spill stop on his website. Link to comment Share on other sites More sharing options...
tha1000 Posted January 29, 2019 Share Posted January 29, 2019 25 minutes ago, Dirtchevy841 said: Thomas you running the 9mm one on the 650 with 40 or just 9mm. I seen he just had the 9mm spill stop on his website. I havent tried it with 40 since I’m not able to shoot a pistol yet. But allegedly the 9mm works for both. Link to comment Share on other sites More sharing options...
rishii Posted January 29, 2019 Share Posted January 29, 2019 On 1/22/2019 at 6:21 PM, chevrofreak said: Go with the Arredondo. My Reloading Innovations ones would work themselves up and out of the hole as they rotated. I have the same problem, and just order the Arredondo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now