Qstick Posted July 8, 2005 Share Posted July 8, 2005 I was wondering what lube you are using on the hammer hooks and sear nose? Slide Glide or SG light - or regular oil? Also- how much are you using, a heavy coating or minimal amounts? I have been using regular FP10, but feel like maybe I should be using something else??? Zach Link to comment Share on other sites More sharing options...
EricW Posted July 8, 2005 Share Posted July 8, 2005 I use SG lite in the summer. FP-10 or Militec in the winter. Link to comment Share on other sites More sharing options...
shred Posted July 8, 2005 Share Posted July 8, 2005 I slop on the black moly lube (trigger slick / action-magic / axle grease / whatever-it's-called). With some practice and a thin tool it can be done with an assembled pistol, though eventually you have to get the excess out. Link to comment Share on other sites More sharing options...
MoNsTeR Posted July 8, 2005 Share Posted July 8, 2005 SG #1, just a little Link to comment Share on other sites More sharing options...
GuildSF4 Posted July 8, 2005 Share Posted July 8, 2005 Brownells Action Lube Plus if any (and very little if I do). Link to comment Share on other sites More sharing options...
Singlestack Posted July 9, 2005 Share Posted July 9, 2005 Trigger Slick Link to comment Share on other sites More sharing options...
diehli Posted July 9, 2005 Share Posted July 9, 2005 I slop on the black moly lube (trigger slick / action-magic / axle grease / whatever-it's-called). With some practice and a thin tool it can be done with an assembled pistol, though eventually you have to get the excess out. <{POST_SNAPBACK}> Brownells Action Lube Plus if any (and very little if I do). <{POST_SNAPBACK}> Trigger Slick <{POST_SNAPBACK}> Ditto that... I've got the Brownell's version. Voigt uses a well-travelled tube of black moly lube when he does trigger jobs. Link to comment Share on other sites More sharing options...
Bill Schwab Posted July 9, 2005 Share Posted July 9, 2005 Small amount of Chip McCormick Trigger Slick. Link to comment Share on other sites More sharing options...
rishii Posted July 9, 2005 Share Posted July 9, 2005 Small amount of Chip McCormick Trigger Slick. <{POST_SNAPBACK}> ditto, I also put it on the bottom of the hammer strut and middle finger of the sear spring. after 10 years I'm finally reaching the bottom of the tub Link to comment Share on other sites More sharing options...
Carlos Posted July 9, 2005 Share Posted July 9, 2005 Use molybdenum disulfide. What is molybdenum disulfide & where does one purchase some? Molybdenum disulfide is a molecule that bonds with the surface of clean, degreased steel & effectively acts like a microscopic layer of ball bearings. It is found in various "engine assembly lube/grease" and some gun products described above as: "(trigger slick / action-magic / axle grease / whatever-it's-called)." It is also used in the polymer coating on the "black bullet" & most other "coated bullets"Its use in the barrel is controversial (see Wil Scheumann's website). Its use on sears & hammers & newly assembled engines is not controversial. Good stuff. Link to comment Share on other sites More sharing options...
XRe Posted July 9, 2005 Share Posted July 9, 2005 I've had a little bottle of JP Trigger Prep for years that I'm still using. I have no idea what's in it... seems to shave a few ounces off the dry trigger pull... Link to comment Share on other sites More sharing options...
George Posted July 10, 2005 Share Posted July 10, 2005 The JP Trigger Prep is Molybdenum Disulfide in a paste form. Link to comment Share on other sites More sharing options...
XRe Posted July 10, 2005 Share Posted July 10, 2005 So, there you have it, then Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now