dravz Posted August 13, 2017 Share Posted August 13, 2017 On 7/18/2017 at 10:12 PM, PrimaryBruce said: Op, if you still need your slide milled let me know. We have milled many many M&P's. We also offer a 10% discount for members here. Are you milling 2.0 slides as well? Link to comment Share on other sites More sharing options...
PrimaryBruce Posted August 14, 2017 Share Posted August 14, 2017 On 8/12/2017 at 10:37 PM, dravz said: Are you milling 2.0 slides as well? For optics yes. We mill pretty much everything for optics. Link to comment Share on other sites More sharing options...
tattooo Posted August 14, 2017 Share Posted August 14, 2017 https://www.smith-wesson.com/firearms/performance-center-ported-slide-kits-mp-9l-0These slide kits go for $330 - $350 and fit any full size frame. They also come with a ported barrel but you can use your original to not have to move to open division. Link to comment Share on other sites More sharing options...
Tacticalpanda Posted August 26, 2017 Share Posted August 26, 2017 (edited) On 8/14/2017 at 3:51 PM, PrimaryBruce said: For optics yes. We mill pretty much everything for optics. I'm looking to have a 2.0 milled. just looked at your site. Didn't see it on your sight but do you do top serrations? Edited August 26, 2017 by Tacticalpanda Link to comment Share on other sites More sharing options...
PrimaryBruce Posted August 29, 2017 Share Posted August 29, 2017 On 8/26/2017 at 9:38 AM, Tacticalpanda said: I'm looking to have a 2.0 milled. just looked at your site. Didn't see it on your sight but do you do top serrations? Yes http://primarymachine.com/add-top-serrations-to-slide-work/ Link to comment Share on other sites More sharing options...
Tacticalpanda Posted September 12, 2017 Share Posted September 12, 2017 On 8/29/2017 at 9:15 AM, PrimaryBruce said: Yes http://primarymachine.com/add-top-serrations-to-slide-work/ Wow completely missed it. Thanks. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted September 12, 2017 Share Posted September 12, 2017 54 minutes ago, Tacticalpanda said: Wow completely missed it. Thanks. No problem. Link to comment Share on other sites More sharing options...
insertgenericid Posted September 14, 2017 Share Posted September 14, 2017 On 3/17/2017 at 9:19 AM, tact said: ATEi is one of the best out there. Second. ATEi has done some amazing work. Also an incredible trigger job. Link to comment Share on other sites More sharing options...
jarozzy Posted October 18, 2017 Share Posted October 18, 2017 I have had ATEI do all my milling. they are very very good. Link to comment Share on other sites More sharing options...
Tonka Posted October 25, 2017 Share Posted October 25, 2017 On 3/15/2017 at 5:00 PM, Nemesis Lead said: Hi Guys, I was thinking about getting my M&P slide milled for a DeltaPoint Pro (Carry Optics Gun). Before you say, "Just get an M&P Core." I live in California and can't buy one. A few questions: 1) Can you please recommend a reputable company to do the milling? Looking for the usual--good work, good prices, fast turnaround, stand behind work, etc.. 2) Are there any known issues with milling M&P slides for optics? I worry a bit about the extractor pin on the top of the slide. 3) Can M&P's have their optics mounted low or are there issues there? 4) Anything else I should know about milling M&P slides? 5) For those who shoot carry optics, do you use backup sights? Many thanks in advance! A really good machinist that will do the work right the first time is Springer Precision out of Bend Oregon...give him a call Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted January 5, 2020 Share Posted January 5, 2020 (edited) On 7/18/2017 at 11:12 PM, PrimaryBruce said: . Edited January 5, 2020 by AverageJoeShooting . Link to comment Share on other sites More sharing options...
Hiroshi Posted January 17, 2020 Share Posted January 17, 2020 Check out Floyds Custom Shop, They specialize in m&p slide. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now