Red Ryder Posted December 10, 2015 Share Posted December 10, 2015 Does the Dillon Nylon dust cover fit with the case feeder, strong mount, and powder measure on the machine? Link to comment Share on other sites More sharing options...
weldon20 Posted December 10, 2015 Share Posted December 10, 2015 I dont have the strong mount but it fits with everything else you list. Based off my set up it will fit with the strong mount but most likely will not cover it Link to comment Share on other sites More sharing options...
Smeeg Posted December 10, 2015 Share Posted December 10, 2015 Can it fit a mr.bulletfeeder also? Link to comment Share on other sites More sharing options...
Pat Miles Posted December 10, 2015 Share Posted December 10, 2015 It fits but does not cover the strongmount. I doubt that it will cover a Mr. Boolitfeeder, made for the 650 only. Link to comment Share on other sites More sharing options...
meatman Posted December 10, 2015 Share Posted December 10, 2015 No bullet feeder on mine, but it has a case feeder & strongmount and it covers all except the Dillon bullet tray. Link to comment Share on other sites More sharing options...
CoachLongShot Posted December 10, 2015 Share Posted December 10, 2015 I have the bullet tray, strong mount, case feeder and the catch (on the right) for the completed cartridge. The dust cover will cover everything, you just can't zip it tight at the bottom. The bullet tray attachment gets in the way. Can post a photo or two if you'd like. Coach. Link to comment Share on other sites More sharing options...
echotango Posted December 10, 2015 Share Posted December 10, 2015 (edited) $9 smoker cover at home depot(the black one, not the gray). Covers mbf and the strong mount. Edited December 10, 2015 by echotango Link to comment Share on other sites More sharing options...
hceuterpe Posted December 11, 2015 Share Posted December 11, 2015 I got it, and don't use it. I have the strongmount, casefeeder, and tray. It's a pain to get on, and my guess is because the ram no longer hangs below the lip of the bench. Also the tray sticks out a bit too much. Link to comment Share on other sites More sharing options...
Dirtchevy841 Posted January 3, 2016 Share Posted January 3, 2016 (edited) $9 smoker cover at home depot(the black one, not the gray). Covers mbf and the strong mount. Cheaper than that. 55 gal trash bag black lowes. Had a cover on it but didn't cover the whole thing. Gave it to a buddy for his 550. It was nice tho. Now the little dust covers for toolhead setup are really nice. Edited January 3, 2016 by Dirtchevy841 Link to comment Share on other sites More sharing options...
Cowboy1629 Posted January 23, 2016 Share Posted January 23, 2016 Can it fit a mr.bulletfeeder also? YES Link to comment Share on other sites More sharing options...
Mikelindsey Posted January 23, 2016 Share Posted January 23, 2016 I like Dillons cover as it slides on and over very well. Zipper never hangs. Link to comment Share on other sites More sharing options...
remoandiris Posted January 23, 2016 Share Posted January 23, 2016 A friend of mine uses an old pillow case on his 1050 with Mr Bulletfeeder. Link to comment Share on other sites More sharing options...
Red Ryder Posted February 3, 2016 Author Share Posted February 3, 2016 I got a blue cloth laundry bag... For $5. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now