BeerBaron Posted January 27, 2015 Share Posted January 27, 2015 Thanks Matt. Again, your mount is miles ahead of others I've looked at already. The posts would just be another level of goodness. On that mount the plastic body cmores fit nice and snugly on the posts (i've not tried an aluminium body cmore but I believe they fit the same). They ensure it gets lined up the same every time. I'd be happy to measure the posts for you if it's of any interest? Link to comment Share on other sites More sharing options...
trgt Posted February 6, 2015 Author Share Posted February 6, 2015 Got my shipping notification today, so these are starting to go out, thanks again Matt! Link to comment Share on other sites More sharing options...
doc187 Posted February 8, 2015 Share Posted February 8, 2015 I wasn't on the list yet but I paid today. Link to comment Share on other sites More sharing options...
trgt Posted February 8, 2015 Author Share Posted February 8, 2015 (edited) Ok doc187, I think Matt said he did extra. Edited February 8, 2015 by trgt Link to comment Share on other sites More sharing options...
Matt Cheely Posted February 8, 2015 Share Posted February 8, 2015 With doc187's order that leaves 2 extras I believe. All US orders have shipped and international will go out this coming week. Link to comment Share on other sites More sharing options...
BeerBaron Posted February 9, 2015 Share Posted February 9, 2015 Hi Matt, while I've got you hear I've got a question where I am I've found it nigh on impossible to get a 10-32 bolt that will work with the mount and fit in the cmore holes to mount it. I've got some nice M5 bolts that will work fine, is there any problem you know if running an M5 tap through the current 10-32 UNF hole to re-tap it to M5? I 'think' it should work but thought you may have more experience with the different threads. Still love the mount and it's by far the best fit on a tanfoglio V12. Link to comment Share on other sites More sharing options...
kneelingatlas Posted February 9, 2015 Share Posted February 9, 2015 Your bolts are on your shopping list Richard Link to comment Share on other sites More sharing options...
BeerBaron Posted February 9, 2015 Share Posted February 9, 2015 ahh yes, I may have found some after all! lol, put my dirty metric tap back in it's box.... umm carry on folks. Link to comment Share on other sites More sharing options...
bullet370 Posted February 9, 2015 Share Posted February 9, 2015 I did not make the cut on the list but did sign and order one from the web sight. I have nit received a shipping notification yet. Dont forget me. Link to comment Share on other sites More sharing options...
bullet370 Posted February 9, 2015 Share Posted February 9, 2015 Order 530. Thanks. Link to comment Share on other sites More sharing options...
Matt Cheely Posted February 9, 2015 Share Posted February 9, 2015 I did not make the cut on the list but did sign and order one from the web sight. I have nit received a shipping notification yet. Dont forget me. Bob, yours went out Friday. Link to comment Share on other sites More sharing options...
Matt Cheely Posted February 9, 2015 Share Posted February 9, 2015 Hi Matt, while I've got you hear I've got a question where I am I've found it nigh on impossible to get a 10-32 bolt that will work with the mount and fit in the cmore holes to mount it. I've got some nice M5 bolts that will work fine, is there any problem you know if running an M5 tap through the current 10-32 UNF hole to re-tap it to M5? I 'think' it should work but thought you may have more experience with the different threads. Still love the mount and it's by far the best fit on a tanfoglio V12. I haven't tapped the hole out to M5 so I couldn't help you there. Link to comment Share on other sites More sharing options...
trgt Posted February 9, 2015 Author Share Posted February 9, 2015 (edited) OK, thanks Matt and everyone on getting this done! Hopefully everyone happy (Intl folks happy soon :-) Matt says one left after everyone who paid up to now has taken theirs, so I'll leave this thread open until someone claims/pays for the one left (see instructions prior post in thread). PM me or post if you buy it so we can shut down thread after that. Cheely Czechmate 90 degree C-More mount Number remaining: 1 Edited February 9, 2015 by trgt Link to comment Share on other sites More sharing options...
bullet370 Posted February 9, 2015 Share Posted February 9, 2015 Thanks Matt it arrived today and looks great!! Thanks much Link to comment Share on other sites More sharing options...
Armin G Posted February 9, 2015 Share Posted February 9, 2015 i'll take the last one mate. Matt any idea yet on postage etc? Link to comment Share on other sites More sharing options...
kitestir Posted February 10, 2015 Share Posted February 10, 2015 Received mine today. Looks awesome! Thanks Matt! Link to comment Share on other sites More sharing options...
trgt Posted February 10, 2015 Author Share Posted February 10, 2015 Cheely Czechmate 90 degree C-More mountNumber remaining: 0 With Armin G claiming last one, I think this thread has run its course. Thanks Matt!! Thanks everyone for getting your interest and commitments in so we could make another batch happen! Time to lock up this thread, thanks again! Link to comment Share on other sites More sharing options...
CZ85Combat Posted February 10, 2015 Share Posted February 10, 2015 (edited) Got mine looks good. Now too find a czechmate to put it on. Been looking for one since September. Can anyone help me find a new one? Edited February 10, 2015 by CZ85Combat Link to comment Share on other sites More sharing options...
trgt Posted February 11, 2015 Author Share Posted February 11, 2015 Got mine looks good. Now too find a czechmate to put it on. Been looking for one since September. Can anyone help me find a new one? Set up a stock alert at KYGUNCO; also drop them a note at Automatic Accuracy that you want one, get on a list, maybe small deposit. That's how I got my 2 new ones :-) Maybe also see if Stuart at CZ Custom will put you on a list for one, and keep checking GunBroker. It's been awhile since new ones have been here, so you'd think soon for more. Link to comment Share on other sites More sharing options...
CZ85Combat Posted February 12, 2015 Share Posted February 12, 2015 ^^^^^^^^ I have done all the above Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now