doc88 Posted October 6, 2014 Share Posted October 6, 2014 (edited) I originally presented this topic in the 40/10mm reloading forum but got no response so I'm going to try it here. I currently shoot a Stock 2 9mm that will produce 1.5" groups at 25yds and put everything in the A zone at 50 yds if I do my part using 147gr Bayou Bullets at a PF of 135. Can one achieve the same accuracy shooting 40 minor with a Stock 2 40SW or will that type of accuracy be compromised when down loading the 40 caliber? I see most using the 180gr projectile in 40 minor but could you not use the 155 gr say a 850- 900fps to get the accuracy or would that be too snappy? That's only a PF of 131-139. I know there is a fair amount of data in the forums concerning 40 minor but my concern is more related to the degree of accuracy one can achieve or is giving up. Experiences and load data would be greatly appreciated. Thank you Edited October 6, 2014 by doc88 Link to comment Share on other sites More sharing options...
bayougump Posted October 6, 2014 Share Posted October 6, 2014 I've shot my Stock III in .40 in both major and minor PF using 180 and 155 grain bayous. I prefer the 180 especially in minor as the recoil is very soft. The sights almost seem to stay stationary. The 155 were bit snappier and after shooting about 100 rds each I've stuck with 180's. I have got to find some of my load data but I do know I chronoed 180's at a 1.140 OAL using 2.8 grains TG and this was the results below Also here is some load data from a friend that may help For major I'm loading 3.9 grains of TG but I can't find chrono results but I know makes major. The 180's were the most accurate of the 2. Hope this helps. If I find my other load data I'll get it to you. Gump Link to comment Share on other sites More sharing options...
Shadyscott999 Posted October 6, 2014 Share Posted October 6, 2014 Nnnnnnnnnno. Link to comment Share on other sites More sharing options...
doc88 Posted October 6, 2014 Author Share Posted October 6, 2014 Nnnnnnnnnno.[/quoteI didn't think so. Link to comment Share on other sites More sharing options...
doc88 Posted October 6, 2014 Author Share Posted October 6, 2014 Nnnnnnnnnno. I didn't think so. Link to comment Share on other sites More sharing options...
Shadyscott999 Posted October 6, 2014 Share Posted October 6, 2014 2.9 Clays under a 180. So good you will wanna slap yo mama. Link to comment Share on other sites More sharing options...
doc88 Posted October 6, 2014 Author Share Posted October 6, 2014 Nnnnnnnnnno. And you so funny! Link to comment Share on other sites More sharing options...
Steve Moneypenny Posted October 6, 2014 Share Posted October 6, 2014 Don't know why you would want to shoot 40 minor. but honestly accuracy won't suffer much, in a stock 2 i'd run 140 PF atleast just to feel the slide cycle. and try to get the bullet to the swinger before it moves lol.. sounds crazy but too slow and stupid things start happening. Link to comment Share on other sites More sharing options...
chuck s Posted October 6, 2014 Share Posted October 6, 2014 our local production GM uses a limited pro 40 on occasion and has found it to be his most accurate gun, including his Stock 2 9mm. i think he uses 147 xtremes and tightgroup. We both have found that our stock 2 and limited pro 9mm guns to be equally accurate, so i think you can assume a stock 2 40 minor to b e good to go. Link to comment Share on other sites More sharing options...
doc88 Posted October 6, 2014 Author Share Posted October 6, 2014 Thanks guys. I think I got my questions answered. I'll stick with the 9 and sell the 40. Link to comment Share on other sites More sharing options...
bayougump Posted October 6, 2014 Share Posted October 6, 2014 Selling your Stock II in .40? Link to comment Share on other sites More sharing options...
doc88 Posted October 6, 2014 Author Share Posted October 6, 2014 Selling your Stock II in .40? Yup! Link to comment Share on other sites More sharing options...
bayougump Posted October 6, 2014 Share Posted October 6, 2014 (edited) Cool, I thoroughly enjoy both my 9mm Stock II but when I chronoed my .40 Stock III last weekend I had forgotten how soft it shoots in minor. I want to add a Limited to the herd one day Edited October 6, 2014 by bayougump Link to comment Share on other sites More sharing options...
Nealio Posted October 6, 2014 Share Posted October 6, 2014 Stock II .40 shoots accurate and still cycles fast. Don't listen to guys giving you advice without experience. Link to comment Share on other sites More sharing options...
kneelingatlas Posted October 6, 2014 Share Posted October 6, 2014 Once I get a few free seconds I plan to test bullets from 135 to 220 in my new Stock II. So many guns, so little time. The struggle is real Link to comment Share on other sites More sharing options...
doc88 Posted October 6, 2014 Author Share Posted October 6, 2014 Stock II .40 shoots accurate and still cycles fast. Don't listen to guys giving you advice without experience. What kind of load are you using for 40 minor? Link to comment Share on other sites More sharing options...
Goldenmotors Posted October 6, 2014 Share Posted October 6, 2014 40 Minor rocks! Keep your 40 Bro. Link to comment Share on other sites More sharing options...
Nealio Posted October 7, 2014 Share Posted October 7, 2014 It was my buddy's pistol. Something like 3.0 of Solo 1000 with a 180gr plated. I can find out the exact load, but it shot soft , accurate and cycled surprisingly fast. This was with an 8lb recoil spring Link to comment Share on other sites More sharing options...
chuck s Posted October 7, 2014 Share Posted October 7, 2014 our local production GM uses a limited pro 40 on occasion and has found it to be his most accurate gun, including his Stock 2 9mm. i think he uses 147 xtremes and tightgroup. We both have found that our stock 2 and limited pro 9mm guns to be equally accurate, so i think you can assume a stock 2 40 minor to b e good to go. sorry, i meant 180 xtremes in the 40 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now