IrishPsych Posted March 17, 2014 Share Posted March 17, 2014 I figure with IDPA I'd use the factory one. But if there is a good holster I could use for both I'd be all ears. I'll be getting this in about 2 weeks and plan on ordering the necessary parts so they are here. I will be shooting production and idpa. Anyone have experience with the new PRP Extreme kit? Says 2.5lbs. Link to comment Share on other sites More sharing options...
Sarge Posted March 17, 2014 Share Posted March 17, 2014 (edited) Get the blade tech DOH. Use the DOH BRACKET for Production and take it off for IDPA. You then have a stingray. You might find you can do just fine without the DOH bracket in Production but at least you will have it if you decide to use it. As for the trigger, I have the original PRP drop in trigger and it is awesome. Don't know about the extreme. Just make sure it is Production legal before buying Edited March 17, 2014 by Sarge Link to comment Share on other sites More sharing options...
Blankenhole Posted March 17, 2014 Share Posted March 17, 2014 I got the ultimate trigger kit and I think its pretty awesome too. Required very little fitting and it was good to go. Made a huge difference. The only reason I didn't try the extreme was because my xdm is my do all gun and I didn't want a 2.5lb trigger for carrying. Link to comment Share on other sites More sharing options...
joshxdm9 Posted March 17, 2014 Share Posted March 17, 2014 +1 bladetech doh and prp drop in kit not fitting or filing and works great!! Link to comment Share on other sites More sharing options...
dave33 Posted March 17, 2014 Share Posted March 17, 2014 Cant help much on holster advice as I use the factory one that came with the gun for IDPA, NRA action pistol, and steel challenge matches, and dont feel like Im at any real disadvantage. That being said I do plan to get some type of offset holster for the steel and action pistol matches. As far as the trigger goes, I have the drop in PRP kit, and with the supplied blue competition springs my trigger breaks right at 3lbs, with little take up and virtually no overtravel. Im sure the competition kit is real nice, I just dont see how it can be much better than the drop in kit. The extreme sounds good, but Im not sure a 2.5lb pull is right for me. Link to comment Share on other sites More sharing options...
BungeeeMan Posted March 18, 2014 Share Posted March 18, 2014 (edited) The blade tech holsters are pretty solid, but I tend to prefer the comp-tac international. The tradeoff is that the comp-tac drop offset hanger isn't as good, but considering I switch back and forth between IDPA and USPSA, I just wear my holster in the same place for both sports so I don't have to alter my draw. I actually have the paddle mount on mine, which works really well when clipped onto a DAA belt. Edited March 18, 2014 by BungeeeMan Link to comment Share on other sites More sharing options...
jdlincoln Posted March 19, 2014 Share Posted March 19, 2014 What Sarge says, except I would just go with the drop in trigger and the light comp springs that come with it as dave says. I have the "ultimate" installed by a gunsmith in mine, wife has the drop-in installed by me. No realistic difference IMHO. Check first if it's legal for USPSA Production. In IDPA with either kit you will be in ESP. JD Link to comment Share on other sites More sharing options...
BungeeeMan Posted March 21, 2014 Share Posted March 21, 2014 The PRP triggers are production legal, but as you said, not SSP legal in IDPA. Link to comment Share on other sites More sharing options...
lknbigfish Posted March 22, 2014 Share Posted March 22, 2014 The PRP triggers are production legal, but as you said, not SSP legal in IDPA. do you think they will make an ssp trigger? Link to comment Share on other sites More sharing options...
Icecold Posted March 22, 2014 Share Posted March 22, 2014 I really don't think the extreme kit is legal in production all you have to do is call powder river and they will let you know Link to comment Share on other sites More sharing options...
Shooter115 Posted March 23, 2014 Share Posted March 23, 2014 I have the original competition trigger in mine and it's really nice, 3lb 4oz break. Just last night installed the new ultimate trigger in a buddies gun and it's flippin awesome. His breaks at 2lb 6oz. Just got in the house from test firing it and it ran like a swiss watch. I'm now having trigger envy. Link to comment Share on other sites More sharing options...
BungeeeMan Posted March 24, 2014 Share Posted March 24, 2014 (edited) The PRP triggers are production legal, but as you said, not SSP legal in IDPA. do you think they will make an ssp trigger? The PRP trigger system depends on some altered trigger geometry and a hard over travel stop built into the trigger, so they have to replace the OEM trigger to really improve it over the factory system. I kind of doubt they'll change, seeing as they obviously think that's the best way to do it, and the hard over travel stop is nicely adjustable to get as much travel out as possible. The Springer Precision system uses a different trigger bar to control travel, so they keep the stock trigger and thus it's an SSP legal system. It's got a different feel from the PRP system, though they are both pretty amazing for plastic gun triggers. I lean towards the Springer system anyway, it's got a little crisper break than any of the PRP triggers I've tried, but if you want to shoot SSP it's your best option. Edited March 24, 2014 by BungeeeMan Link to comment Share on other sites More sharing options...
Out of Ammo Posted March 26, 2014 Share Posted March 26, 2014 +1 BladeTech DOH Link to comment Share on other sites More sharing options...
Studlee Posted April 6, 2014 Share Posted April 6, 2014 I also prefer the Comp-Tac International. Comes with 3 different mounts - paddle, belt and DOH. Very easy to switch between USPSA and IDPA. My 5.25 has the PRP Ultimate. Legal in USPSA and IDPA ESP. If I run the gun in SSP I switch back to original trigger. Link to comment Share on other sites More sharing options...
BungeeeMan Posted April 7, 2014 Share Posted April 7, 2014 I also prefer the Comp-Tac International. Comes with 3 different mounts - paddle, belt and DOH. Very easy to switch between USPSA and IDPA. My 5.25 has the PRP Ultimate. Legal in USPSA and IDPA ESP. If I run the gun in SSP I switch back to original trigger. I love the international's holster body, I think it's generally molded better than the blade-techs, and the paddle mount rocks for IDPA. The one downside for USPSA is the DOH hanger, which is kind of floppy and gets in the way of my thumb on the draw (like most DOH hangers, including the blade-tech). I recently got my hands on a boss mount from Ben Stoeger's shop (http://www.benstoegerproshop.com/BSPS-BOSS-DOH-Holster-Hanger-p/bsps-hanger.htm) and mounted my international to it. It's by far the best production setup out there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now