spikers220 Posted December 10, 2013 Share Posted December 10, 2013 Just what the title says. I would like to know some things about CCG because I have zero experience with them. I am looking for a top notch IDPA gun and I feel this gun will suit my needs. Please enlighten me with your experiences either with a custom built gun from CCG or any experiences you may have had with the builder. Link to comment Share on other sites More sharing options...
xdcr Posted December 10, 2013 Share Posted December 10, 2013 I just received an open gun from Matt ~2wks ago and it's a beautiful gun. Highly recommended. I have friends that Matt has built guns for and the quality has been top notch. He will build whatever you want. Link to comment Share on other sites More sharing options...
hdgun Posted December 10, 2013 Share Posted December 10, 2013 I have been shooting a 9mm 1911 he built for me about five years ago and it has zero fails Link to comment Share on other sites More sharing options...
Rick88 Posted December 10, 2013 Share Posted December 10, 2013 (edited) Are saying that you want a sti 2011 hi cap 9mm for idpa? Edited December 10, 2013 by Rick88 Link to comment Share on other sites More sharing options...
xdcr Posted December 10, 2013 Share Posted December 10, 2013 Short dust cover, bushing barrel and a magwell that fit's the box and you're good to go. Link to comment Share on other sites More sharing options...
spikers220 Posted December 10, 2013 Author Share Posted December 10, 2013 Are saying that you want a sti 2011 hi cap 9mm for idpa? That is exactly what I am saying. I will use the gun for other things as well - hence the hi-cap. Link to comment Share on other sites More sharing options...
gondo Posted December 10, 2013 Share Posted December 10, 2013 Svi on gunbroker right now Link to comment Share on other sites More sharing options...
gondo Posted December 10, 2013 Share Posted December 10, 2013 Svi on gunbroker right now Link to comment Share on other sites More sharing options...
spikers220 Posted December 10, 2013 Author Share Posted December 10, 2013 Svi on gunbroker right now I didn't find an SVI on GunBroker that is similar to this... You have a link? Link to comment Share on other sites More sharing options...
Sarge Posted December 10, 2013 Share Posted December 10, 2013 You will be hard pressed to find a better builder than Matt Cheely of CCGunworks! He built an Open gun for me two seasons ago and it is virtually as reliable as my Glock was. His customer service is as good as his builds. There is no reason to worry about buying a gun from Matt. Link to comment Share on other sites More sharing options...
BillChunn Posted December 10, 2013 Share Posted December 10, 2013 (edited) I have two Open guns that Matt built / rebarrelled. Cannot go wrong. His backlog is growing everyday so if you want a place in line, plop down some cash and grab it! BC Edited December 11, 2013 by BillChunn Link to comment Share on other sites More sharing options...
trp Posted December 10, 2013 Share Posted December 10, 2013 A top of the love gun for idpa? Link to comment Share on other sites More sharing options...
gondo Posted December 10, 2013 Share Posted December 10, 2013 Svi on gunbroker right now I didn't find an SVI on GunBroker that is similar to this... You have a link? sold yesterday sorry Link to comment Share on other sites More sharing options...
eric4069 Posted December 10, 2013 Share Posted December 10, 2013 (edited) I got my Cheely 40 a couple wks ago and after a 100 rounds or so break-in the action is smooth as butter while still tight. Also extemely accurate. Now I'm spoiled. Eric Edited December 10, 2013 by eric4069 Link to comment Share on other sites More sharing options...
Garyg19 Posted December 10, 2013 Share Posted December 10, 2013 Excellent customer service Link to comment Share on other sites More sharing options...
LegionShooter Posted December 10, 2013 Share Posted December 10, 2013 I ordered an LDC .40 based on all the research and recommendations here. He always seems to be at the top of some very short lists. Can't wait to get my hands on it! I got my Cheely 40 a couple wks ago and after a 100 rounds or so break-in the action is smooth as butter while still tight. Also extemely accurate. Now I'm spoiled. Eric Since I'm on the subject, how long did it take to get yours? I ordered mine last December so I'm hoping there's some light at the end of the tunnel. Excitement is killing me... Link to comment Share on other sites More sharing options...
HotLoad Posted December 10, 2013 Share Posted December 10, 2013 I have one Cheely gun and am waiting for my second with two top ends. Very very satisfied. Excellent customer service and top quality guns that run and run and run. Mine is still up on his gallery page. I feel like a proud papa! J Link to comment Share on other sites More sharing options...
eric4069 Posted December 11, 2013 Share Posted December 11, 2013 (edited) I ordered an LDC .40 based on all the research and recommendations here. He always seems to be at the top of some very short lists. Can't wait to get my hands on it! I got my Cheely 40 a couple wks ago and after a 100 rounds or so break-in the action is smooth as butter while still tight. Also extemely accurate. Now I'm spoiled. Eric Since I'm on the subject, how long did it take to get yours? I ordered mine last December so I'm hoping there's some light at the end of the tunnel. Excitement is killing me... 8 1/2 months, however I am not a good example as Matt contacted me recently, let me know that it would still be quite awhile till he got to my 6" build, but offered me a 5.4" he had on hand. I took that instead of waiting for the 6". I am delighted with the 5.4" which is on his new CK Arms frame. Eric Edited December 11, 2013 by eric4069 Link to comment Share on other sites More sharing options...
spikers220 Posted December 11, 2013 Author Share Posted December 11, 2013 I appreciate the input guys. I think I know what my next build will be. Link to comment Share on other sites More sharing options...
eric nielsen Posted December 11, 2013 Share Posted December 11, 2013 His work is worth every penny; love my Limited gun & most likely will never sell it. Call me a snob but I chose Matt for the combination of mechanical engineering education plus grandmaster skills. I changed my mind on a couple of prototype ideas and he made changes about as quick as it takes to ship in both directions. He's got my Open gun now to re-blue the top end, his bluing is fantastic. Not to knock any other gunsmiths but if there's one better than Matt anywhere, they're not very dang much better, no way, he's got this stuff figured out. Link to comment Share on other sites More sharing options...
Captmark Posted December 17, 2013 Share Posted December 17, 2013 Matt has built several 2011's, One 1911, one Caspian Hi Cap, and thru a hybrid barrel on a STI Tactical for me. All work has been perfect and his customer service is second to none. Throw done the cash and start the wait. It will be worth every penny and then some. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now