Kahai808 Posted December 6, 2013 Share Posted December 6, 2013 I finally bought my first Tanfoglio. Now I have to wait 10 days, damn Cali! Pick up a Stock II for production. I usually shoot a G34 and it's done well over the years! Should have a lot of fun learning a new platform for next season! I wanna thank ogiebb advice! Link to comment Share on other sites More sharing options...
Skydiver Posted December 6, 2013 Share Posted December 6, 2013 Congrats! Welcome to the new addiction. Be sure to use the new K9 magazines for that puppy to ensure good feeding. I'm not sure how you'll get the K9 mags into California though. Link to comment Share on other sites More sharing options...
Kahai808 Posted December 6, 2013 Author Share Posted December 6, 2013 Good thing I'm not a Cali Resident Link to comment Share on other sites More sharing options...
Wilfred Posted December 6, 2013 Share Posted December 6, 2013 (edited) Very nice! You can get your holster, basepads and other cool stuffs at: www.benstoegerproshop.com Edited December 6, 2013 by Wilfred Link to comment Share on other sites More sharing options...
ogiebb Posted December 6, 2013 Share Posted December 6, 2013 I finally bought my first Tanfoglio. Now I have to wait 10 days, damn Cali! Pick up a Stock II for production. I usually shoot a G34 and it's done well over the years! Should have a lot of fun learning a new platform for next season! I wanna thank ogiebb advice! ImageUploadedByTapatalk1386363015.566873.jpg Very Nice!!! Congrats Dean Link to comment Share on other sites More sharing options...
Kahai808 Posted December 6, 2013 Author Share Posted December 6, 2013 Very nice! You can get your holster, basepads and other cool stuffs at: www.benstoegerproshop.com Already did! All my part, mags, holsters are shipped and headed my way! Link to comment Share on other sites More sharing options...
Kahai808 Posted December 6, 2013 Author Share Posted December 6, 2013 I finally bought my first Tanfoglio. Now I have to wait 10 days, damn Cali! Pick up a Stock II for production. I usually shoot a G34 and it's done well over the years! Should have a lot of fun learning a new platform for next season! I wanna thank ogiebb advice! ImageUploadedByTapatalk1386363015.566873.jpg Very Nice!!! Congrats Dean Thanks! It's gotta stiff DA but I'm gonna work it over like u told me! Link to comment Share on other sites More sharing options...
kneelingatlas Posted December 6, 2013 Share Posted December 6, 2013 Next thing you know you'll try one of my Tanfo Open guns and that GM will be up for sale! Link to comment Share on other sites More sharing options...
praetorian97 Posted December 6, 2013 Share Posted December 6, 2013 Are the Tanfo Open guns good guns? Dont get me wrong Im a die hard Limited Fan. Link to comment Share on other sites More sharing options...
Kahai808 Posted December 6, 2013 Author Share Posted December 6, 2013 Next thing you know you'll try one of my Tanfo Open guns and that GM will be up for sale! Probably try and find me a back up gun then a limited. I'm gonna just shoot your open lol! Link to comment Share on other sites More sharing options...
phatman Posted December 6, 2013 Share Posted December 6, 2013 Sorry to hear that lol Here is site that will help you fine tune that thing - http://henningshootsguns.com Sent from my SGH-I757M using Tapatalk Link to comment Share on other sites More sharing options...
kneelingatlas Posted December 6, 2013 Share Posted December 6, 2013 (edited) Are the Tanfo Open guns good guns? Dont get me wrong Im a die hard Limited Fan. The Gold Team leaves much to be desired, if you want a Tanfo Open you have to make it yourself Edited December 7, 2013 by kneelingatlas Link to comment Share on other sites More sharing options...
Kahai808 Posted December 7, 2013 Author Share Posted December 7, 2013 Sorry to hear that lol Here is site that will help you fine tune that thing - http://henningshootsguns.com Sent from my SGH-I757M using Tapatalk Already ordered part! Thanks Link to comment Share on other sites More sharing options...
Vanniek71 Posted December 11, 2013 Share Posted December 11, 2013 heh welcome, $1500 later, mines shootable and there is still some more stuff I want to do to it! Link to comment Share on other sites More sharing options...
idcastandblast Posted December 11, 2013 Share Posted December 11, 2013 Nice purchase. Welcome to the addiction. Link to comment Share on other sites More sharing options...
BeerBaron Posted December 11, 2013 Share Posted December 11, 2013 well done. stock II is arguably the best production gun there is out of the box. CZ has a better DA trigger but the stock II has the bull barrel, better fit and finish, looks nicer and to me nicer grip dimensions. I'm sure you'll love it. Link to comment Share on other sites More sharing options...
pharoh Posted December 12, 2013 Share Posted December 12, 2013 Nice piece, welcome to the tanfo club :-D Link to comment Share on other sites More sharing options...
ScottQ Posted December 12, 2013 Share Posted December 12, 2013 I just picked up a Stock 1 a month or so ago, and so far I really like it. Compared to the plastic guns I've been shooting it's so much nicer. Accuracy seems better, and the sights recover faster (presumably due to that big cone barrel and the all around heavier frame). The only challenge I have run into was failures to feed and extract properly with my 130ish power factor loads. Out of the box it ran fine on factory ammo (though in truth I only put a small amount through it), but I had frequent issues with my reloads. Ultimately the solution was a lighter 8 lb recoil spring and a lighter 13 lb. hammer spring. Once I put those in my feeding and extracting issues went away and the gun barely recoils. Still working on my trigger, and I'm getting a few more light primer hits than I'd like, which I'm working on as well. Safe shooting! Link to comment Share on other sites More sharing options...
Prov1x Posted December 12, 2013 Share Posted December 12, 2013 I just picked up a Stock 1 a month or so ago, and so far I really like it. Compared to the plastic guns I've been shooting it's so much nicer. Accuracy seems better, and the sights recover faster (presumably due to that big cone barrel and the all around heavier frame). The only challenge I have run into was failures to feed and extract properly with my 130ish power factor loads. Out of the box it ran fine on factory ammo (though in truth I only put a small amount through it), but I had frequent issues with my reloads. Ultimately the solution was a lighter 8 lb recoil spring and a lighter 13 lb. hammer spring. Once I put those in my feeding and extracting issues went away and the gun barely recoils. Still working on my trigger, and I'm getting a few more light primer hits than I'd like, which I'm working on as well. Safe shooting! Go to a 14# hammer spring and I think you'll get rid of all the light strike issues. Link to comment Share on other sites More sharing options...
ScottQ Posted December 12, 2013 Share Posted December 12, 2013 My first step is to polish the firing pin and firing pin block. If that doesn't work, then I have a 14# hammer spring here which I'll drop in. I had the same thought. Link to comment Share on other sites More sharing options...
Vanniek71 Posted December 12, 2013 Share Posted December 12, 2013 If you want to keep the lighter springs for the better trigger pull, get a Henning XL firing pin. You can run any springs you want pretty much with that. Link to comment Share on other sites More sharing options...
ScottQ Posted December 12, 2013 Share Posted December 12, 2013 The XL firing pin is also on my list to consider, but it's my understanding that Henning's firing pin isn't Production legal. Or at least the one he lists on his website. I've seen other posts that allude to a new Production legal XL firing pin, but I don't know if that is ready for prime time or not. Maybe some of you guys know. The other option obviously is to order Eric's from France, but that takes some time, unless someone is stocking these parts in the US that I don't know about. Link to comment Share on other sites More sharing options...
Vanniek71 Posted December 12, 2013 Share Posted December 12, 2013 I think it's not production legal because you have to remove the firing pin block to use it. Forgot about that part. I shoot Limited with my Tanfo so I don't have to worry about that part. Could order Erics now and by the time shooting season is back you'd be good t Link to comment Share on other sites More sharing options...
Vanniek71 Posted December 12, 2013 Share Posted December 12, 2013 To go... Sorry hit submit too quick lol Link to comment Share on other sites More sharing options...
Vanniek71 Posted December 12, 2013 Share Posted December 12, 2013 You also could shoot Ben Stoeger a mssg, he's on here, he helped me with some mag questions I had, can ask what he runs... I think he kinda knows what he's doing lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now