Langenator Posted March 8, 2013 Share Posted March 8, 2013 WANT!!!!!!!! Link to comment Share on other sites More sharing options...
gator098 Posted March 8, 2013 Share Posted March 8, 2013 ummmmmm...........................................WANT!!!!!!!!!!!!!!!!!!!!!! what??????????????????? Link to comment Share on other sites More sharing options...
Langenator Posted March 8, 2013 Author Share Posted March 8, 2013 Huh...the video shows up just fine in my browser. (Firefox 19, Win7) Seach youtube for "Experimental CZ 10mm" by user "theheineken" Basically, a 10mm CZ-97B, although it looks like the slide has borrowed a good bit from the SP-01. And I just realized that, with headphones on, I can hear the trigger reset in that video. Link to comment Share on other sites More sharing options...
jswitt99 Posted March 9, 2013 Share Posted March 9, 2013 At least there is ammo on the shelves for it. Link to comment Share on other sites More sharing options...
eerw Posted March 9, 2013 Share Posted March 9, 2013 was told a worked over SP01 .40 topend. Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 17, 2013 Share Posted May 17, 2013 was told a worked over SP01 .40 topend. Small frame??? Looks an awful lot like a 97 to me. Here's mine with a Tanfo 10mm conversion: Link to comment Share on other sites More sharing options...
eerw Posted May 17, 2013 Share Posted May 17, 2013 97 frame and a welded SP01 40 upper. Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 17, 2013 Share Posted May 17, 2013 OK, so they cut, extended and welded an SP01 slide? Link to comment Share on other sites More sharing options...
eerw Posted May 17, 2013 Share Posted May 17, 2013 That what I was told they did to lengthen the slide to fit up to the frame Link to comment Share on other sites More sharing options...
tortuga Posted May 18, 2013 Share Posted May 18, 2013 (edited) Great, just when I thought the shade-tree gunsmithing was over... If an SP-01 slide can be extended to fit, a .40 TS slide should be just right...ream the throat to load .40 at 1.2" OAL and use EAA 10MM or .40 Mags with extensions... Does the 75B/SP-01 slide fit on a 97B frame? I see the 97B frame with a 10MM EAA slide but I can't quite get my head around what fits on what - my CZ parts don't fit a small EAA frame, so I figured it was a no go. Edited May 18, 2013 by tortuga Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 18, 2013 Share Posted May 18, 2013 Tortuga, the SP01 slide fits on the TS (see my Open TS), but the TS is a small frame (albeit a wide body small frame) so no 10mm or .45. The difference between large/small frame slides is in the space between the hammer and the breech so this SP01 slide had to be cut behind the breech and welded back together with a spacer in between the two halves. Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 18, 2013 Share Posted May 18, 2013 Also, your small frame CZ parts don't fit the Tanfo small frame because the the slide rails on the CZ are a hair bigger than Tanfo. Tanfo slide on a CZ frame is a little loose and the CZ ejector is too wide for the channel in the slide. Link to comment Share on other sites More sharing options...
Akacala Posted May 18, 2013 Share Posted May 18, 2013 (edited) Hm, interesting. What CZ frames fit with what EAA slides? Edited May 18, 2013 by Akacala Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 18, 2013 Share Posted May 18, 2013 Akacala, generally there are two basic frame sizes amount pistols: small and large. Small for 9/40 and large for .38 super/10/.45. This holds true for CZs, Tanfoglios, Glocks, ect. This is without regard to how long the barrel is (compact, standard, long slide); does that make sense? When Tanfoglios and 2011/1911 large frame pistols are chambered in small frame calibers, a spacer is employed either at the front or rear of the magazine. Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 18, 2013 Share Posted May 18, 2013 With the terms defined, CZs and Tanfoglios are similar enough in form and function that like frame sizes have some degree of compatibility. Magazines are for the most part cross compatible without modification (small in small and large in large, but slides are different enough to require modifications to function together. Link to comment Share on other sites More sharing options...
tortuga Posted May 19, 2013 Share Posted May 19, 2013 OK, the issue of hammer to breech distance totally makes sense. I think I am trying to make the wheel rounder and should just buy a TS. I got excited about the idea of loading the .40 longer - going to play with that idea with a Glock 20. What is the max OAL for a .40 in a Tac Sport? From what I have read it is somewhere around 1.135 Link to comment Share on other sites More sharing options...
Bunsen Posted May 19, 2013 Share Posted May 19, 2013 Looks fun! Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 19, 2013 Share Posted May 19, 2013 What is the max OAL for a .40 in a Tac Sport? From what I have read it is somewhere around 1.135 It depends on the bullet, I have some lead 155 grain I can't load longer than 1.1 without hitting the rifling, but I think 1.135 should be right for a 180 grain FMJ. I hear Bayou bullets work well in the TS. Link to comment Share on other sites More sharing options...
EngineerEli Posted September 24, 2013 Share Posted September 24, 2013 Did you guys notice he tri-topped the SP-01 Slide on his 10mm frankin gun. I really want to get the slide on my TS tri-topped like that, or like the slide on the CM. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now