R.Elliott Posted July 3, 2016 Share Posted July 3, 2016 You can make another thin plastic shim from an empty powder jug and place it under the existing shim. Link to comment Share on other sites More sharing options...
Patriot man Posted July 3, 2016 Share Posted July 3, 2016 I found this thread on the topic: http://www.brianenos.com/forums/index.php?showtopic=186984&view=&hl=&fromsearch=1 It seems soft Velcro is the first solution to try, I'll go from there Thanks Link to comment Share on other sites More sharing options...
MemphisMechanic Posted July 3, 2016 Share Posted July 3, 2016 This isn't CZ specific but I switched from CR traditional bullet-forward CR Speed to "bullets out" Ghost pouches two months ago. Once the obvious learning curve was over, I wished I had gone directly these in the beginning. Smoothest draw, priced well, and bullets out really helps keep mags spaced apart yet taking up minimal space when you run six of them in production. Link to comment Share on other sites More sharing options...
Patriot man Posted July 3, 2016 Share Posted July 3, 2016 (edited) I'm on a budget and this sport is a money suck with no end in sight... Already got a CR speed with four pouches (Bullets forward) and lots of rounds down range with that style. Just tried regular Velcro brand, factory mag now tight. Will try at the range and update Edited July 4, 2016 by Patriot man Link to comment Share on other sites More sharing options...
HDGoose Posted July 27, 2016 Share Posted July 27, 2016 I started out with CR Speed pouches then switched to the Ghost pouches with bullets out because the seemed to be the hotness with everyone else. After 3 months switched to bullets forward with the Ghost pouches because I just couldn't get used to the bullets out. Link to comment Share on other sites More sharing options...
tomfturner Posted July 27, 2016 Share Posted July 27, 2016 Plus one on the ghost pouches. Sent from my SM-G900V using Tapatalk Link to comment Share on other sites More sharing options...
Patriot man Posted July 27, 2016 Share Posted July 27, 2016 $4 dollar Velcro worked perfect with CR speed pouches and CZ mags. (MecGar are not loose in CR speed for me) Link to comment Share on other sites More sharing options...
brian45acp Posted July 28, 2016 Share Posted July 28, 2016 Ready tactical copied kytex. The design sucks for durability. I tried to CCW them then used them at an idpa match. I kept pulling a mag and the one next to it would pull out and drop on the ground. I figured I would add a piece of electrical tape inside to tighten the fit because I loved how compact they were. One day I came home took it off and belt clip part was partially cracked and peeled back. I must have hooked the bottom on something and it pulled up. I don't use them any more and for sure not CCW Link to comment Share on other sites More sharing options...
45 Raven Posted July 28, 2016 Share Posted July 28, 2016 K-Y-T-E-X KYTEX Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now