Adamski Posted March 6, 2014 Share Posted March 6, 2014 hlpressley, sent you PM a few days ago. Link to comment Share on other sites More sharing options...
usmc90 Posted March 15, 2014 Share Posted March 15, 2014 I have 712 for sale if interested...pm me Link to comment Share on other sites More sharing options...
RDF5186 Posted March 24, 2014 Share Posted March 24, 2014 New bolt handle is a perfect fit. Easy transaction and finish. !!!!!!! Link to comment Share on other sites More sharing options...
azlester Posted April 1, 2014 Share Posted April 1, 2014 What has happened to all the interest in the CZ712? Seems like there is more interest in the Stoeger M3000... Is the M3000 that much better all around then the CZ? or just easier to use/modify for 3 gun? Link to comment Share on other sites More sharing options...
Aleric Posted April 3, 2014 Share Posted April 3, 2014 The M3K is the "IT" gun right now. But I shot a team shotgun match last weekend and the 712 held its own. I will continue to run this gun for this years 3 gun season. Its been a great gun Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 8, 2014 Share Posted April 8, 2014 What has happened to all the interest in the CZ712? Seems like there is more interest in the Stoeger M3000... Is the M3000 that much better all around then the CZ? or just easier to use/modify for 3 gun? M3000 requires a mag tube and it's 3-gun ready. It uses the reliable inertia system like Benellis so it's reliable. Gonna see a lot of them at matches this year. Link to comment Share on other sites More sharing options...
RDF5186 Posted May 12, 2014 Share Posted May 12, 2014 I love my 712 als but on the flip side my buddy runs a m3500 and has great luck with it. I think they are both great guns to use getting into multi gun matches! Link to comment Share on other sites More sharing options...
RDF5186 Posted May 18, 2014 Share Posted May 18, 2014 So my next match has a slug stage built into it....go figure I havent run slugs through this gun yet. I know there are a million different opinions and options out there, but i was wondering what slugs seem to like the 712 (or vice versa). Just as a side note gun is still running great! Link to comment Share on other sites More sharing options...
Langenator Posted May 19, 2014 Share Posted May 19, 2014 Mine runs Fiocchi reduced recoil slugs with no issues. Link to comment Share on other sites More sharing options...
goodmanac Posted May 19, 2014 Share Posted May 19, 2014 Mine will run reduced recoil rio star slugs without failures also. Link to comment Share on other sites More sharing options...
RDF5186 Posted May 19, 2014 Share Posted May 19, 2014 Great thanks! Link to comment Share on other sites More sharing options...
RDF5186 Posted June 6, 2014 Share Posted June 6, 2014 Need some input... I have begun to have some feeding issues. With the bolt forward I can load the mag tube with 8 rounds with no issues. When I charge the bolt handle the round In the tube does not come out and gets chambered. It will not cycle manually. Any suggestions? Link to comment Share on other sites More sharing options...
RDF5186 Posted June 6, 2014 Share Posted June 6, 2014 It will cycle when firing though Link to comment Share on other sites More sharing options...
goodmanac Posted June 6, 2014 Share Posted June 6, 2014 Need some input... I have begun to have some feeding issues. With the bolt forward I can load the mag tube with 8 rounds with no issues. When I charge the bolt handle the round In the tube does not come out and gets chambered. It will not cycle manually. Any suggestions? Sounds like the follower/mag spring is getting stuck. I had this issue when I switched the the mag tube follower from Nordic. It would stick, so I switched back to the stock follower and the issue went away. Link to comment Share on other sites More sharing options...
RDF5186 Posted June 6, 2014 Share Posted June 6, 2014 Copy. I have a nc follower in it now I'll try the stock one and see Link to comment Share on other sites More sharing options...
5early Posted June 8, 2014 Share Posted June 8, 2014 In practice this week my 712 went full auto. Now when I drop the bolt the hammer follows. If I ease the bolt forward the hammer stays back but the trigger is dead. Didn't have time to crack it open yet. Anyone got any ideas? Keith Link to comment Share on other sites More sharing options...
sschultz Posted June 8, 2014 Share Posted June 8, 2014 5early That happened to mine. The disconnecter is not catching the hammer. Call CZ and take the old hammer out and they will send you a new one. CZ has good customer service and will take good care of you. Schultz Link to comment Share on other sites More sharing options...
5early Posted June 8, 2014 Share Posted June 8, 2014 5early That happened to mine. The disconnecter is not catching the hammer. Call CZ and take the old hammer out and they will send you a new one. CZ has good customer service and will take good care of you. Schultz Thanks sschultz, did yours also lock up the trigger? I'm wondering if the trigger return spring popped out. Link to comment Share on other sites More sharing options...
sschultz Posted June 8, 2014 Share Posted June 8, 2014 You might want to pop it open with mine the hammer was following the bolt back. Link to comment Share on other sites More sharing options...
kurtm Posted June 8, 2014 Share Posted June 8, 2014 Yep I've seen a couple of them pop the trigger return spring out of it's detention cup. Had to drill the detention cup deeper on one of them. I would ask this question over on Boomershooter, that is where the real shotgun experts hang out. Link to comment Share on other sites More sharing options...
RDF5186 Posted June 9, 2014 Share Posted June 9, 2014 Switched an same result. No feed manually. It will drop when I hit the carrier release on lifter but still no manual cycle. It does cycle while shooting......weird! Disassembled and cleaned and polished no change... Link to comment Share on other sites More sharing options...
goodmanac Posted June 9, 2014 Share Posted June 9, 2014 Switched an same result. No feed manually. It will drop when I hit the carrier release on lifter but still no manual cycle. It does cycle while shooting......weird! Disassembled and cleaned and polished no change... This may be a silly suggestion so I apologize in advance. But when you finish loading the tube have you been pressing the load gate release button so it will feed into the chamber? Link to comment Share on other sites More sharing options...
kurtm Posted June 9, 2014 Share Posted June 9, 2014 RDF5186 the 712 will never feed one from the tube unless one of two things happen. ONE: The trigger is pulled. I recommend you only do this while shooting. TWO: Tripping the carrier tab at the bottom back of the carrier, while NOT shooting. The 712/720 operate almost identically to the M1/M2 Benelli, but instead of a little tab by the trigger guard your little tab is at the bottom back of the lifter/carrier. Link to comment Share on other sites More sharing options...
kurtm Posted June 9, 2014 Share Posted June 9, 2014 5early, I'm glad the experts over at Boomer got you all fixed up! No one knows more about shotguns than they do!!! I'm sure all of those guys have a great tutorial about your disassembly/assembly problem, but if they wont share, look up how to D.C.O.A. an M1/M2 Benelli, they are almost identical. I would also look at the schematics for an M1 trigger mechinisim over on Benelli it will help you determine what might be broke. Once again they are almost identical to the M1/M2 Benelli Link to comment Share on other sites More sharing options...
RDF5186 Posted June 10, 2014 Share Posted June 10, 2014 High five! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now