Dusty

The biggest thing I liked about this die was the De-capping part of it. I was running dillon dies in my 1050 and a mixed lot of 9mm brass. A couple of brands of brass would constantly have pull backs on the primer. The de-capping system on these dies are working a lot better. I loaded @500 rds the other night and never had a pull back. lubing is an extra step, but it definitely makes the press run smoother. The bottle shape that I had before isn’t there anymore, but that was mainly a cosmetic issue.

Are you spraying the brass directly? I am using a Tupperware bowl, it’s just a pain to get them all laying sideways, unless I just do a minimum amount. Not sure if any gets inside the case, if it will contaminate the primer.

For those that lube their brass with peg 75 lanolin mixed with iso alcohol, do you make sure every piece is laying side ways? I usually tumble rifle brass after lining and sizing, but with pistol, I plan on just sizing and loading in 1 step. How critical is it to keep it out of the case mouth? Will it contaminate the primer if any gets inside?

As a side note, when Wayne saw this post, he called me up on a Sat. To help me get it remedied. Can’t ask for better response than that.

It was user error on my part. I didn’t have the die down far enough. Once I screwed down against the shell plate, it all fell into place. I have .005 neck tension now.

Does the x5 use the same trigger bar as a stock 320?

I adjusted the sizer down to a very slight push against the shell plate. That got it tightened up with good tension now.

For those who are using the Blue Bullets, are you using the .355 or .356? Was looking at the 135’s

Will it fit on a double alpha belt?

Are the sig Romeo line of red dots reliable?

So the mag well is the only reason why the regular mags won’t fit? That’s good to know, thanks.

Does the Nevermiss hanger have different size spacers, to adjust how far it sticks out?

Has anyone used this combo for a Sig X5 legion? Will the Nevermiss let the holster ride high enough to stay legal in production class?

Just got a X5 legion to start shooting production class. Possibly carry optics. I am assuming that the 21rd mags will not work in production due to the length requirement. I need to get some more 17rd., but I read somewhere that the standard 320 17rd. Mags won’t work with the legion frame. Everywhere I looked for legion mags, is out of stock. Can the baseplate be modified on a standard mag to fit the legion? Or am I going to have to buy a standard 17rd. and then buy an aftermarket base pad?