My 550b came misaligned from the factory. With Dillon dies it might not have been as noticeable, but I use Lee dies which size down a little farther and have a tighter radius. I had to get an alignment tool from Dillon to correct this issue:
My CZC Shadow Custom 2014 came with a Slide Stop that looks like it was cut & polished. I ordered a backup Slide Stop and it doesn't have the modification.
What is the purpose of cutting & polishing the Slide Stop?
Does CZC or CGW sell Slide Stops with the mod?
You have options...
Want the Shadow Target? Get a non-SP01 Shadow Target and shoot ESP.
Want the full length dust cover? Get the SP01 or SP01 Shadow and shoot SSP or ESP.
Any recommendations for a sight pusher for an SP-01 Shadow?
I have a MGW sight pusher for my Glocks, and it works every well but it is Glock specific.
Are there any universal sight pushers that work well with CZ?
Yeah, I noticed rear sight was not centered. I had to loosen the set screw and tap it to center with a brass punch. It was in there pretty tight.
Anyone know what range they "zero" this at?
How picky is the SP-01 on ammo? My Glock will eat most anything, including rounds that don't pass the case gauge.
Is the SP-01 picky on crimp, OAL etc.?
On a CZ without a decocker, what is the safest method to lower the hammer with a live round in the chamber?
Use your thumb on top?
Pinch the sides with your thumb and finger?
What is a good starting point for a load with 147gr Xtreme RN and Titegroup in the SP01 Shadow? I'm looking to get about 130 PF.
Does 3.2 grains and 1.130 OAL sound close?