HOGRIDER

Look at the latest Equipment Surveys starting on Page 40, and you'll notice in Production and Carry Optics the powder most used was Hodgdon (who makes Titegroup)! https://uspsa.org/magazine/view//2023-00#page=54

Thanks Wayne! I still need to test the Black Dot and then finalize everything in the Ransom Rest; but I was so shocked that my current match load did so well in this initial bench test! At least I can settle in with that load until I find time to do further testing. I also want to video/test some return to zero drills and see if I need to try a +/- RC spring. The display stand? If so, it's the LOK Grips offering. They have some nice stands that actually display the pistol with the slide horizontal! https://lokgrips.com/gun-stands/aluminum/gun-stand-raw-aluminum/ I'll definitely be looking out for your extensive ammo test! I'd sure like to hear the details of your process/procedures! Thanks again!

Hey! It happens to us all.......to many acronyms in this day and age! Glad to help!

The Sig Armorer……. https://www.thesigarmorer.com/

It's in the house! My OCD had me waiting a few days on the perfect mounting screws for the SRO and some MBX Extreme springs/followers; but finally got a chance to get to the range for testing/sight-in. After my initial safety tests/shots and RDS sight in, I got ~100 rounds of factory 124g & 115g rounds downrange. Not the first issue/problem/disappointment. Function was perfect with the factory loads; and my test loads off the bench. I verified a 9# RC spring from the factory. Ejection was ~4:00 at 4ft. Bench resting during sight in with factory ammo I had on hand showed it liked the 124g over the 115g. Of course I have not loaded any 115g so couldn't go there; however, the last couple of groups I tested were with my existing match load of N330 and PD 124JHPs. I think these will do for now............ Welcome any constructive comments and/or questions! Got a LOT OF PRACTICE ahead of me to get ready for my first match next month; but my love affair of the 1911/2011 platform has been rekindled!!!!

What exactly are you looking for? bull barrel? threaded? overall length? what ramp cut? Gunsmith fit or drop in?

IMO, yes it's just as soft...........a little slower burn rate but about the same energy......... https://www.vihtavuori.com/powders/n300-powders/ 4.7g @ 1.080" which yielded a 135-136PF IIRC. This fell right in line with KKM's recommendation....... Try it..........you'll like it!

Like you, I've always been a fan of VV N320; especially with the 147g bullets. At the recommendation of Luke/KKM, I bought some N330 to test with the 124/125g JHPs. It definitely tightened up the groups a bit....... Sent the MAX to TSA for his competition package. Have to say it's as close to a 1911 trigger as ANY striker fired pistol I've had in my hands! We actually discussed that issue prior to him doing the work........... 1911's are easy??? YES! Like you, I've also had a love affair with the 1911/2011 platform for right at 50 years! I enjoy their fire control system more than any other!!! BTW: this is that same "match load" I bench rested yesterday in the new LO pistol:

This is the same load bench tested using one of those inexpensive Caldwell plastic rests...........

Have you thought about ordering one directly from KKM? https://kkmprecision.com/home/shop/

After a LENGTHY discussion with Luke at KKM, he recommended I use the xtp type 124/125 JHPs with my new 1:16 twist KKM barrel in the P320 MAX. Final test session comparing load results in the Ransom Rest, I settled on this combo: IMO, it won't get much better than this in a P320 type pistol.........

In the same boat re: needing a "dot"! You'll love the DH9!

When I moved to CO, I bought a P320 MAX. And one of the big selling points for me was the slide was bare of any fixed sights; and the optic was set to the rear. With my new LOC pistol, I stipulated NO iron sights and the optic plate for my SRO as far to the rear as possible. I too wanted the front of the SRO as far behind the breechface as possible. This is the Accuracy X sight Multi-Sight system.

Got a confirmation this am that I have/chose the S2 Standard Aggressive grip. Now that I think back about the day we tested, I can't imagine me needing anything more aggressive; especially shooting 9mm minor.

Great job JD!

I really think the Hybrids may be shipping quicker than the LOC; of course the options on either probably dictates how quick they ship....... My LOC was 13 weeks and 6 days which included second day air UPS from MPA to my Dealer here in KY. Good luck with getting your DS9!

@mrvip27 To be perfectly honest, I'm not really sure at this point. When I finalized my build, this was the score sheet. I do see now all 3 grip options are on the options table. During my visit with David at MPA, we discussed all the options; and I got to actually test several examples of grips, trigger lengths, thumb safeties, and slide stops. After firing SEVERAL mags through several pistols, Dave said I think this grip would be my choice for LO Competition! I agreed and we left it at that. I'll find out tomorrow and let you know for sure. It IS an aggressive grip; just not sure at this point if its the S2 or S3.

Thanks @Boomstick303! Truly looking forward to LO!

Thanks!

The LOC.........fits me like a glove!

My recommendation! https://www.thesigarmorer.com/ Give Robert a call. Very easy to talk with!

Just finished setting up my FLEX for the new MPS LOC, and the fit/retention feels fine. Pretty straightforward setup. Definitely an option for your LOC!