gmg

Right after I started shooting my CZ the G34 was sold along with all Glock accessories and have never looked back.

Make sure you are not limp wristing it and check the OAL of your ammo. CZ's have short chambers but long ammo will not run reliably in them. I have some ammo that I loaded for a Glock and I cannot shoot them in my CZ. By the way, the Glock is history.

I am using CR Speed for production but use Center of Mass for SS and will be using them for limited. I would be using them for production if I were doing it over. Take a look at 'em, they are really nice and I believe cheaper too.

Or buy a 9mm for IDPA - one you actually use in real life... And have your Cheeley .40 2011 for FUN. This is the way I vote. Get that Cheeley gun and shoot USPSA, which you will begin to shoot exclusively anyway, trade the G19 for a G17 or better yet, since I am a CZ guy, get a CZ 75 9mm for IDPA. Then you really will have the best of both worlds.

Thanks NV.

Does anybody know where you can get grips made? I am looking for wooden grips for my CZ TS that are not flat. Thanks

I am not real fond of the flat metal grips on CZ pistols and like a more rounded grip. Does anyone know if I can get and where I can get different grips.

How much does he charge for the atronite finish and is black the only color.

Hello guys. I am trying to do something I have wanted to do for a long time, start a new range/club for my area. I found 50acres for sale that will be the range. What i need to know is is there any financial help, help with starting new range, ins.,any programs and just general advice. I need all the advice I can get so please help.

Yea I figured that out when i bought one and my CR speed mag pouches would not go on the belt. Needless to say I was pissed.

Just to update, I got it to go back in the next day. And yes I did remove hammer spring right after it happened. For others that have this same problem, I will tell what was happening. There is a little piece (don't know name) on the right side (ejection port side) of the gun that had slipped back some and would not let the sear assembly slide back. After I reinstalled it the assembly slid right back in. Then it was the matter of just sliding the safety in. Thanks for all your replies.

I am trying to find a used WSMII that will fit within my budget. If not I may go with the Blade-tech ICE holster that has the front cut out. Mag pouches may be from Center of Mass. They are rotaters that are very well made. I already have a DAA belt but it seems wider than the CR speed belts.

Unless your chamber has been lengthened, you will have to load short, depending on your bullet profile. Make a dummy round using yoou preferred bullet and load it long, say 1.130. Stick in your guns barrel chamber and see if bullet will spin freely while exerting a small amount of pressure on it. If it don't spin, seated it a little deeper and repeat til it will spin, alas your oal. My load is 3.5gr N320 with 147gr Bayou Bullet, oal 1.135 and PF of 131. Very accurate and smooth. Front sight barely moves. My .02 sense.

My new Tactical sport came in the other day and a extended safety was installed. This had to go. I started removing the safety lever and the ejector/sear assembly came out. Now it won't go back in. I can not get it to slide back far emough to reinstall safeties. What am I doing wrong besides working on it?

Hello guys, I just received a CZ TS from burningsquirrels hoping to get into limited. What I would like to know from any of you guys running a TS in Limited is what kind of equipment (holster, mags,etc)that you are using. I have no idea what kind of holster to use. Maybe I can find a used WSM holster to use. Thanks for your responses. P.S. I searched and couldn't find anything

147gr Bayou bullet 3.5gr N320 1.135 oal chamber reamed win or fed small pistol primers 131PF

Has anyone set up a 7mm-08 for long range shooting? Are there any disadvantages to using 7mm-08? Looks like with a 160gr Berger it has very good BC. Reason I am asking is b/c I am thinking of doing one for hunting and on the line?

CZ Shadow SP-01 Mixed brass WSP 3.5gr N320 OAL 1.135 - Chamber lengthened 147gr Bayou Bullett PF=131

Thanks guys. Both of them are 40's. Come to find out, we swapped even my .243 WSSM with a really nice Weaver scope for his Remington 700 7mm-08. He brought the 40b to get that scope with the my .243. So, I ended up with a Remington 700 and a CZ 40b. May have to do something with that 40b.

I recently purchased a used 85 compact (not combat) and sent it to Stuart for a trigger job and hammer, sights, etc changed out on it. I showed it to a friend of mine and he really like it. The next day he brings CZ 40b to work for me to see. It is new in the box with 1 mag. I think he wants to trade. So the question is, would ya'll trade guns if you were in my shoes. The CZ 40b is much lighter than the 85. P.S. I have not shot either gun yet.

for me, CZ 75B SA. SWEEET.

Load a dummy round, remove your barrel, stick your dummy round in the your barrel chamber firmly and try to turn it. If it won't turn, seat the bullet and little deeper in your case and repeat. If it's too long it won't turn. I had to load mine short, around 1.110 - 1.115 to get them to turn freely. I have since lengthened my chamber to be able to load them longer. I am shooting 147gr Bayou Bullets.

If you still want a gunsmith, check out Clark Custom guns in Louisiana. Check out his website because the Rugers are one of their specialties. www.clarkcustomguns.com

+1 on the Akai custom CZ. I bought my Shadow form CZ custom and I thought the trigger was good when I got it. I had Shay put his trigger job on it and it is now simply awesome. Save yourself some trouble and get one of Shay's guns.

Most definitely. I polish the inside of the powder drop funnel, charge bar and sides of primer bar. Just males sense to me that is everything is polished it will run smoother.