moto727

I took apart my M1 to clean it and when unscrewing the Nordic tube, the tube that attaches directly to the receiver started to unscrew so I took it all the way off, cleaned the threads and screwed the main mag tube back into the receiver along with a little lock tight. The next day, i was practicing quad loads and had a problem getting the shells to eject from the tube after hitting the cartridge drop lever. In order to get them out from the tube, had to rock the bolt back real hard. Mag tube spring is brand new, cut 14" past the mag extension tube on a 12 total round tube. This issue has come up recently at a match when loading at the make ready command but no issues while shooting. The gun has 5 years of heavy use so could i have worn out the carrier latch? Thanks,

istrelok

just tried to register for ST and it doesnt look to be an option

That worked! Appreciate it

So got the mr bulletfeeder running but i notice that the powder dropper that expands the case gets stuck on the case on the return stroke, has a nice thud and almost binds up the machine. ive tried decreasing the amount of the bell by raising the powder dropper higher and that helps but i dont like to jar the machine on every stroke. Im tempted to go back to the factory powder dispenser. this is in 9mm.

They shoot great, have been running one for a couple years. they love 77gr over 24gr of varget

its the block. buy a dedicated lower. the block is pushing up on the bolt so the hammer is not being fully contacted so it isnt resetting. i played this game to with the hahn block.

The registration links dont appear to be working. When does registration open up?

Cant find any load data for AR Comp for 77gr bullets aside from the 22.1 gr listed on Alliants website. What is the max load for this powder?

Just installed a type 1 CGW disco in my SP01 Shadow and the about 30% of the time, the trigger wont reset in both s/a and d/a. In d/a, the trigger will go back and forth but wont catch and move the hammer. Did i install it wrong or is some fitting required??? Also installed an extended firing pin with a 11.5lb hammer spring and ended up with a 2.5lb s/a trigger.

Yes and the more i read the more confused i got! Seems like the major them is to polish the points of contact, run lighter springs with an extended firing pin but i dont know if any you can change out the hammer and remain production legal. Another point of confusion are the various reach reduction kits/ short reset kits. Are they necessary or should i just kit the disco?

Just bought an SP01 Shadow and want to lighten and shorten the reset of the trigger but I'm confused as to what parts to order. Can someone give me a list of what to buy? I can figure out the install. Thanks!

For those that didnt make it to the first one, you missed an awesome match, good news is that there will be several more of this. Here is our match video: https://www.youtube.com/watch?v=MSSkXQ-7q6o

what are the rules for this one?

Here is our match video. So many great stages, hard to cut it down to just 6 minutes https://www.youtube.com/watch?v=IsqHdmvjS9c

This was a phenominal match. The stages were well thought out and challenging. The props and stage guns were a great additition. This was the best run match Ive shot as well. Hats off to Daniel and company for a job well done. If they were able to put togethor this caliber of a match in such a short time, I cant wait to see what they can do in a year.

What is considered hot ammo?

perfect. thanks.

Searched but couldnt find it, what are the correct dimensions on a 9mm 1911 breech face?

im 4 months in... wish i was 11 months in..

its good stuff.

Jeff was the first guy i called and he doesnt work on them. Ill try polishing the linkages

ive got over 10k rounds through one with out issue and at around 3k on another one. they are awesome.

Has anyone done a trigger job on a Nova? Just got one and the trigger is pretty heavy. Any interchangablity with M1/M2 parts?

Had a great time at the Mid Atlantic, only thing Id change would be the weather!