LeviSS

I contacted Timney and they sent me this video to troubleshoot.

I think that's the same problem I'm having. It's even worse with a gunked up frame. Did relieving that area help the problem?

Several minus connectors on Ebay.

I knew I had a 13lb ISMI around and after some digging, I found it. For some reason, it passes it now. Maybe it was because the gun was new when I first tried it and now it's broken in? IDK. So, for now I'm going to try to run the Timney with 13lb recoil and 4.5 striker springs. I'll shoot it in the off season to make sure that combo works well.

Thanks. What weight striker spring?

I bought one of the first ones they put out. Maybe that's part of the problem i'm having. Did you have to send your old trigger back?

What's this red spring you guys are talking about? Mine just came with a silver spring.

I think I've been using a 15lb because it didn't pass the vertical battery test when I was setting it up a couple years agowith a 13lb. That was with irons. Both ISMI. I've got a Timney in it now. Now I've got an SRO on it and was curious if a 13lb would work with the extra mass of the optic. What are you guys running?

Do you just bend it little by little so it sits further from the housing until you get it how you like it?

I got mine last night for Gen 5. Night and day difference. I am going to play around with the connectors a little and see what happens, but I'd be happy with it now. I think this could bring a lot more people back to Glock. The trigger has been my only complaint about them and even that was workable.

Thanks. I'm currently running an A5 tube, so that's what I am going to do.

I've got a KynShot RB 5020SS on the way, so that will short stroke it. Hyperfire Eclipse for the trigger.

I'm currently building up a couple PCCs. I'm using a FM bolt in one right now, but was thinking of trying something else for the other. Here are the ones that I am considering: Stern Defense - Nickle Boron Iron City Red Mohawk 3.0 - Copperhead I'd like something that is coated just for easier cleanup and friction reduction in the blowback system. Any others I should look at? Any general feelings on the two listed?

I don't know why they omitted the rear cocking serrations totally on a gun that can go back and forth between production and CO. It seems they would have put something on the back for racking off the rear of the slide when not using an optic.

I got it out today with an easy out. It's not loctited in.

Exact same things I was missing. 9mm

Yes

Mine broke today while loading. Of course it broke below flush with nothing to get ahold of. I don't know why they would use a cheap ass pot metal screw stud, then loctite it in. Now I have to deal with this after waiting months for the press, a week on the parts they forgot to install and however long this takes.

Got the 4" mount today and it is perfect.

I got the new die today. It was tight, but nothing like the first one. It's all set up and running now.

Tried that...still wouldn't go in my single stage press and I've had it forever with no problem with a die ever. Now it looks chewed up around the top.

I tried to install the bullet feeder on my new 1100 also and the die wouldn't screw in more than a turn or two before it got to the point where I couldn't get it to screw in any further. I took it out and screwed in a different die. It screwed in fine all the way down. I tried the DAA die in my old single stage press...same thing. It wouldn't screw in. I don't know if they had a run of dies with threads out of spec or what. I emailed DAA to try to get another die. I feel like this press doesn't want me to load ammo on it. I get it, it's missing parts. I find out I need a riser, still waiting on Inline Fabrication to ship it. Then I try to assemble everything so it's ready to rock when I get the riser and the bullet feeder die won't screw in.

How long did it take you to get the mount from IF?

Mine was an online order.

I've never messed with a 1050. My bench has a counter top on it with cabinets under it, which limits how close to the edge I can have it. I'd have to be out far enough that the face of the cabinets are in the way to poke a bolt up through.