Brian Gonsalves Posted March 3, 2009 Share Posted March 3, 2009 Edit to add - Should have the first run ready in a week or so. Great! When would you like us to send payment? Thanks! Brian Link to comment Share on other sites More sharing options...
festus1 Posted March 3, 2009 Share Posted March 3, 2009 Hope this is not too late. I am ready to order/pay for: 1 Classic Patridge Green Fiber Optic .300 Tall Thanks, Chris Link to comment Share on other sites More sharing options...
Toolguy Posted March 3, 2009 Share Posted March 3, 2009 (edited) Yes - I will have more than just what was ordered. I have to make these is production runs. One at a time, they would be about $90.00 each. You can start sending payments now. As soon as they are done I'll ship to the payments received. Be sure to include shipping address and preferably phone # in case I have a question about what you want. Thanks to all! Warren Edited March 3, 2009 by Toolguy Link to comment Share on other sites More sharing options...
Protocall Design Posted March 8, 2009 Author Share Posted March 8, 2009 Updated for mwx40x40 & festus1 orders. Also updated status - we plan to have this run completed by 3/14. Now ready to accept payments. Link to comment Share on other sites More sharing options...
mwx40x40 Posted March 8, 2009 Share Posted March 8, 2009 Updated for mwx40x40 & festus1 orders. Also updated status - we plan to have this run completed by 3/14. Now ready to accept payments. I will take a plain black .300 Classic. What number do I call for CC order? I did not see one listed. Link to comment Share on other sites More sharing options...
TxD Posted March 13, 2009 Share Posted March 13, 2009 I would like 1ea, 100 wide, pin on, green F/O, 250 tall. Also is there a phone number for CC payment and shipping instructions? Thanks. Link to comment Share on other sites More sharing options...
mikey357 Posted March 22, 2009 Share Posted March 22, 2009 THANKS for answering my Question! Now, I've come up with ANOTHER...Don'tcha' just LOVE Questions???...I REALLY LIKE the .100-in. width Front Sight with the .125-in. wide "Factory" rear sight notch on FOUR-INCH guns...seems like I see a lil' TOO MUCH "Light" on either side of the front sight when using the .100-in. wide Front Sight on LONGER Barrels, so... Have you given any thought to making the Front Sight Blades with an "Intermediate" Width--like .110 in. to .115 in.??? That'd be the "Cat's Meow"--at least FOR ME--on Five-inch to Six-and-a-half inch barrels, when used with the "Factory" width rear sight notch(es). Thanks!....mikey357 Yes - the bottom part of the Pin-On and Classic are both .125 wide, then the blade part that you see thru the rear notch is .100 wide,centered on the .125 part. That's why no one else wants to do them - too much work. Good question. Edit to add - Should have the first run ready in a week or so. Link to comment Share on other sites More sharing options...
Toolguy Posted March 22, 2009 Share Posted March 22, 2009 (edited) Once I get the .100s out the door and see how that goes, I might think about doing custom widths for a small additional fee. Edited March 22, 2009 by Toolguy Link to comment Share on other sites More sharing options...
mikey357 Posted March 22, 2009 Share Posted March 22, 2009 COOL!!!...I'll be lookin' out for THAT...and THANKS for getting to the Question so FAST....mikey357 One I get the .100s out the door and see how that goes, I might think about doing custom widths for a small additional fee. Link to comment Share on other sites More sharing options...
mwx40x40 Posted March 29, 2009 Share Posted March 29, 2009 Updated for mwx40x40 & festus1 orders. Also updated status - we plan to have this run completed by 3/14. Now ready to accept payments. I will take a plain black .300 Classic. What number do I call for CC order? I did not see one listed. When will this order go out? Link to comment Share on other sites More sharing options...
Toolguy Posted March 29, 2009 Share Posted March 29, 2009 (edited) These are going to be finished machining sometime tonight. They will then get deburred tomorrow and hot blued next week, possibly as soon as Monday. As soon as they are blued or blued and fibers installed, they will go out. I have made several of each kind, so subsequent orders can be shipped in a more timely manner. This project turned out to be more than I had planned on. For those who were on the original order, thanks for your faith in me and your patience. I have worked very hard to make a first quality target grade sight. Best Regards- Warren Edited March 29, 2009 by Toolguy Link to comment Share on other sites More sharing options...
Toolguy Posted March 30, 2009 Share Posted March 30, 2009 Update - My bluing guys blue Thurs. , will get them back and ship Friday. Thanks all. Best Regards - Warren Link to comment Share on other sites More sharing options...
The_Shadow Posted March 30, 2009 Share Posted March 30, 2009 I'd like to order a front sight for a S&W Model 22 Thunder Ranch. Front sight is pinned, I do not know the exact height needed. Link to comment Share on other sites More sharing options...
Toolguy Posted March 31, 2009 Share Posted March 31, 2009 Hi Shadow- We'll get it figured out and get you fixed up. Link to comment Share on other sites More sharing options...
Toolguy Posted April 5, 2009 Share Posted April 5, 2009 (edited) All orders are ready. Don't have payment or ship to info for most. I'm shipping to those I can find. If you haven't sent payment please do so. . Edited January 8, 2023 by Toolguy remove PI Link to comment Share on other sites More sharing options...
Toolguy Posted April 7, 2009 Share Posted April 7, 2009 COOL!!!...I'll be lookin' out for THAT...and THANKS for getting to the Question so FAST....mikey357One I get the .100s out the door and see how that goes, I might think about doing custom widths for a small additional fee. Mikey357 - tell me what you want. Custom widths are $50.00 black, $55.00 F/O + $5.00 shipping. Link to comment Share on other sites More sharing options...
TxD Posted April 9, 2009 Share Posted April 9, 2009 Got my sight today and it looks great. Thanks, Warren! Link to comment Share on other sites More sharing options...
mwx40x40 Posted April 10, 2009 Share Posted April 10, 2009 Got my sight today and it looks great.Thanks, Warren! +1. Got mine too. Looks great. Can't wait to test drive it. Link to comment Share on other sites More sharing options...
CDPMatt Posted April 14, 2009 Share Posted April 14, 2009 Got mt sight today as well.... they look really nice but alas, I bought the wrong one. I thought since my 625 had a pin in the front that I needed the pinned one as was wrong, looks like I needed the classic one. Link to comment Share on other sites More sharing options...
Brian Gonsalves Posted April 14, 2009 Share Posted April 14, 2009 I received mine as well, perfect! Thanks! Link to comment Share on other sites More sharing options...
Toolguy Posted April 19, 2009 Share Posted April 19, 2009 Thanks for the feedback Guys! Let me know how it goes once you start using them. Link to comment Share on other sites More sharing options...
Crabbys44 Posted April 27, 2009 Share Posted April 27, 2009 Hi Warren, Carmoney referred me to you. I have a S&W 629 "Trail Boss." It has the 3"bbl and MagnaPorting. My problem is I keep melting the plastic insert on the front sight. I found the pin holding the ramp on, it's about 1/3 from the back of the blade. I want an all black sight to replace the factory one, preferably a little thinner but the same height. I don't much care if it is a ramp or partridge type. I teach at Front Sight where speed and accuracy are job requirements, but almost no instructors carry revolvers. Do you have what I need in stock or can you refer me to the right place? I have decent mechanical skills and few tools, so the simpler the better. Thanks, John -------------------- "All right, they're on our left, they're on our right, they're in front of us, they're behind us...they can't get away this time" - Lewis B. "Chesty" Puller, USMC Link to comment Share on other sites More sharing options...
Danva Posted April 27, 2009 Share Posted April 27, 2009 ARE FRONT SIGHTS STILL AVAILABLE? LOOKING AT THE PIN ON CLASSIC IN BLACK OR F O Link to comment Share on other sites More sharing options...
Toolguy Posted April 27, 2009 Share Posted April 27, 2009 (edited) Hi John- Give me a call at so I can determine exactly what you need. I probably have it in stock right now. Hi Danva- Sights are in stock ready to ship. Call or email with details. T Thanks Guys! Edited January 8, 2023 by Toolguy remove PI Link to comment Share on other sites More sharing options...
Mooney Posted June 9, 2009 Share Posted June 9, 2009 PM inbound... Link to comment Share on other sites More sharing options...
Recommended Posts