Cuz Posted November 10, 2006 Share Posted November 10, 2006 Help, I have to make a decision in order to get in on a bulk purchase deal. I don't even have my 9mm handgun yet but I'm planning to buy 5,000 bullets. How do I decide which bullet weight to go with? I'm planning on two 9mm pistols, a Glock 34 and an SVI/STI 2011 type with 5 inch barrel. I plan to use them for steel plate matches and Production class USPSA matches as well. Any advice is greatly appreciated as I need to make a decision in the next week. Thanks, Cuz. Link to comment Share on other sites More sharing options...
n2ipsc Posted November 10, 2006 Share Posted November 10, 2006 YMMV, but - personally - I've yet to find anything a 115 will do that a 124 won't do better - using less powder and more accurately. If you're shooting un-compensated toys, buy a small box of 147's and try them over some of the powder-puff charges of N320, et al, that you'll find in the forums. Link to comment Share on other sites More sharing options...
blkbrd Posted November 10, 2006 Share Posted November 10, 2006 I like Zero 147's in my production 9mm loads. Try out several before a bulk buy, the 125's are OK and the 115's suck. The 147's just feel great. Heavy is soft, lighter is snappy. Link to comment Share on other sites More sharing options...
Micah Posted November 10, 2006 Share Posted November 10, 2006 I'm also a big fan of 147's for Production. I usually buy Zeros, but Precision Delta is super cheap ($60/k shipped). I just bought 6k yesterday. I'll let you guys know how they preform if you pm me. Link to comment Share on other sites More sharing options...
Flexmoney Posted November 10, 2006 Share Posted November 10, 2006 Get a quarter. Get a magic marker. Write 124 on the "heads" side. Write 125 on the "tails" side. Flip it and let it land on the ground. If it lands on edge, get the 115's. Be done with that and move on. (Keep the quarter and marker in your range bag. You may need it later for other important decisions.) I have a little bit of about every weight of 9mm bullet, from 108g to 147g. None of it matters to me. Pick one that shoots well and go with it. You can live with either for 5k. Link to comment Share on other sites More sharing options...
Cuz Posted November 10, 2006 Author Share Posted November 10, 2006 Thanks for the input. I was leaning toward the 124gr bullets but wanted to hear what others had to say. So far I will go with 124gr at least for my first 5000 bullets. -Cuz. Link to comment Share on other sites More sharing options...
DougCarden Posted November 10, 2006 Share Posted November 10, 2006 (edited) I have tried every bullet weight out there for 9x19 for production, steel etc. I buy 147s from Angus (ZERO) or Precision Deltas. They are accurate, light recoil, and take steel better at 130PF than the 124s...IMHO. I would try some at PF before you put a big order in, but if it is between 115s and 124s, I would go with the 124s. My .02$ Enjoy! DougC Edited November 10, 2006 by DougC Link to comment Share on other sites More sharing options...
uscbigdawg Posted November 10, 2006 Share Posted November 10, 2006 YMMV, but - personally - I've yet to find anything a 115 will do that a 124 won't do better - using less powder and more accurately.If you're shooting un-compensated toys, buy a small box of 147's and try them over some of the powder-puff charges of N320, et al, that you'll find in the forums. Yeah...if you shoot Open, it makes a big difference; especially if your pistol is ported to hell. Under the old power factor, 124's were great, 'cause you got great accurate bullets and a lot of gas (i.e. working the comp better). With the reduction in power factor, you can get a poofier load in the same gun with 124's but with the reduced gas volume, they tend not to work the comps as well (as they can). 115's are as accurate and with the increased gas, get the gas volumes back up and everything running happy again. Hope that helped. Rich Link to comment Share on other sites More sharing options...
DanM Posted November 11, 2006 Share Posted November 11, 2006 I've shot about a zillion Montanna Gold 115's and 124's through my Springfield 1911 9mm for Steel Challenge and I prefer the 124's myself with N330 powder. The JHP's seemed just a tad more accurate than the CMJ's. From what I've heard, N330 is pretty much the shizzle for 9mm. Link to comment Share on other sites More sharing options...
Chris Keen Posted November 11, 2006 Share Posted November 11, 2006 147's are the softest and best loads for me. Link to comment Share on other sites More sharing options...
Cuz Posted November 11, 2006 Author Share Posted November 11, 2006 Thanks for all the info. I already shoot Zero and Montana Gold bullets in 40 cal, but want plated bullets for the 9mm since jacketed aren't allowed at some of the ranges I shoot at. I was avoiding the 147gr bullets to keep the cost down. That's kind of why I'm going to 9mm to begin with. I'm looking to get a Glock 34 to get a little extra sight radius. I figure all I need to do is switch the sights and I'll be good to go. I'm hoping it will be plenty accurate for the local plate matches. -Cuz. Link to comment Share on other sites More sharing options...
Chris Keen Posted November 11, 2006 Share Posted November 11, 2006 Rainier 147 gr 9mm's are pretty cheap, and very reliable. Link to comment Share on other sites More sharing options...
DanM Posted November 11, 2006 Share Posted November 11, 2006 Also look up X-treme bullets. They used to be West Coast Bullets. Very nice bullets for not a lot of money. Link to comment Share on other sites More sharing options...
Harmon Posted November 16, 2006 Share Posted November 16, 2006 if your shooting at a stop plate you want the fastest bullet you can get at a reasonable power factor...the clock stops at the bullets impact, not the report. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now