Tim300wsm Posted July 25, 2021 Share Posted July 25, 2021 Found one of these for sale and was wondering what’s different from the EAA guns it looks like an ELITE stock frame with a Elite Ltd custom slide Link to comment Share on other sites More sharing options...
oldmanwithagun Posted July 25, 2021 Share Posted July 25, 2021 (edited) Different importers have Tanfoglio mix things up. What is shown is a blend of the stock2 and the stock 3 with a double action trigger. Nice shooting gun as I have one in 9mm. Will probably replace the DA trigger with a SA trigger as my other Tanfoglios are 10mm SA. I am currently having a leather carry holster being made by Ted Blocker Holsters as I couldn't find any 'cheap' ones that the Tanfoglio with the full dust cover fit. Edited July 25, 2021 by oldmanwithagun Link to comment Share on other sites More sharing options...
Tim300wsm Posted July 25, 2021 Author Share Posted July 25, 2021 I was looking at the 10mm version. Thanks for the info Link to comment Share on other sites More sharing options...
N7VY Posted July 25, 2021 Share Posted July 25, 2021 The picture shows a small frame pistol. Just say’in. Link to comment Share on other sites More sharing options...
Tim300wsm Posted July 25, 2021 Author Share Posted July 25, 2021 They have more than one for sale. It’s just the pic I could find Link to comment Share on other sites More sharing options...
oldmanwithagun Posted July 26, 2021 Share Posted July 26, 2021 2 hours ago, N7VY said: The picture shows a small frame pistol. Just say’in. Mine is a large frame, never handled a small frame so it took me a while comparing mine to the posted picture to how close the safety and slide release where to each other. I know how to tell a large frame from the right side. Link to comment Share on other sites More sharing options...
oldmanwithagun Posted July 26, 2021 Share Posted July 26, 2021 Last bit of info, these have the coned barrel. Link to comment Share on other sites More sharing options...
Tim300wsm Posted July 26, 2021 Author Share Posted July 26, 2021 I think I will wait and get a single action. The way things have been I worry it will be impossible to find another for quite some time Link to comment Share on other sites More sharing options...
MemphisMechanic Posted July 26, 2021 Share Posted July 26, 2021 26 minutes ago, Tim300wsm said: I think I will wait and get a single action. The way things have been I worry it will be impossible to find another for quite some time They’re quite easy to convert to single action if you’re comfortable doing some disassembly and very basic gunsmithing. Link to comment Share on other sites More sharing options...
Yagi Posted July 29, 2021 Share Posted July 29, 2021 The picture is a large frame. Not a small frame. Link to comment Share on other sites More sharing options...
N7VY Posted August 3, 2021 Share Posted August 3, 2021 I was wrong…… it’s a large frame. I bow my head in shame Link to comment Share on other sites More sharing options...
mcflury Posted August 14, 2021 Share Posted August 14, 2021 I have a small frame in .40 feels the same as my large frames Link to comment Share on other sites More sharing options...
oldmanwithagun Posted August 15, 2021 Share Posted August 15, 2021 I purchased the Henning trigger, did a lot of polishing and because I purchased the largest trigger (big hands) the front stop screw doesn't allow consistent locking into battery and release. Upon Henning's suggestion I removed the front screw and all worked, but the trigger had to much take up. Tried grinding the take up screw down and got frustrated so I sent gun the Henning and having the full meal done, trigger, hammer and sear. It should be noted the the Stock Master from IFG (defiant) has a 2 piece sear. Link to comment Share on other sites More sharing options...
mcflury Posted August 16, 2021 Share Posted August 16, 2021 What did you polish I was considering cleaning up the trigger also trying to remove some take up if possible Link to comment Share on other sites More sharing options...
oldmanwithagun Posted September 17, 2021 Share Posted September 17, 2021 Double to single action update. I purchased the extended trigger from Hennings and the stock master sa/da had a 2 piece sear and I was unable to feel the action was reliable. It is my understanding the other 2 versions would be fine but I do have very large hands. So I opted to get the full meal deal which included the ultimate hammer, sear, spring and firing pin and have them do the dirty work. I will take it to the range this weekend along with my Shadow 2 SA and let you know how they compare. Both have about 2.3 lb trigger pull. Link to comment Share on other sites More sharing options...
TitoR Posted October 10, 2021 Share Posted October 10, 2021 On 9/16/2021 at 7:20 PM, oldmanwithagun said: Double to single action update. I purchased the extended trigger from Hennings and the stock master sa/da had a 2 piece sear and I was unable to feel the action was reliable. It is my understanding the other 2 versions would be fine but I do have very large hands. So I opted to get the full meal deal which included the ultimate hammer, sear, spring and firing pin and have them do the dirty work. I will take it to the range this weekend along with my Shadow 2 SA and let you know how they compare. Both have about 2.3 lb trigger pull. How did it go at the range? How did it compare to the S2? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now