Walther PPQ M5 Match Carry Optics Parts wishlist

[Silverscooby27]

I’m trying to put together a Walther Q5 match for carry optics next year...

 

What parts/mods would make the ultimate gun and rig for the game? 

 

Thanks

[jaep1911]

RDS of your choice,

Mag extensions from TT, TF or SP. I liked the TF. 

A one piece SS guide rod with a 1911 5" flat wire recoil spring (13 or 14lbs should work)

I liked an Apex Flat Trigger, It reduces the pre and over travel to a great deal.

A trigger spring kit from Sprinco (you need to call to order) - with the above trigger, the set up gave me a trigger like 1911's at 2.5lbs-ish.

 

That all said, the top two are all you need for the CO.

Edited December 9, 2018 by jaep1911

[MemphisMechanic]

6 hours ago, jaep1911 said:

RDS of your choice,

Mag extensions from TT, TF or SP. I liked the TF. 

A one piece SS guide rod with a 1911 5" flat wire recoil spring (13 or 14lbs should work)

I liked an Apex Flat Trigger, It reduces the pre and over travel to a great deal.

A trigger spring kit from Sprinco (you need to call to order) - with the above trigger, the set up gave me a trigger like 1911's at 2.5lbs-ish.

 

That all said, the top two are all you need for the CO.

 

Deltapoint pro 2.5 MOA

 

For mags, a TTI +5 extension with a Grams spring and follower for the P320 will get you 23 rounds in the mags, although they won’t lock open when empty.

[je85]

TTI extensions with grams guts

Jpoint or shield rms 8moa red dot for a ultra low rds. cowitness is possible with a .010+ taller front sight

Jager glock gen 4 long/heavy guide rod

13-14lb recoil spring. I like 14lb

Home Depot spring pack for many trigger return springs

Powder river precision XDM FPB safety spring

Those 2 springs with minimal polishing will get you a 2lb 2oz trigger with a positive reset. The FPB spring is a must for this to happen

[highhope]

On 12/9/2018 at 3:45 PM, jaep1911 said:

RDS of your choice,

Mag extensions from TT, TF or SP. I liked the TF. 

A one piece SS guide rod with a 1911 5" flat wire recoil spring (13 or 14lbs should work)

I liked an Apex Flat Trigger, It reduces the pre and over travel to a great deal.

A trigger spring kit from Sprinco (you need to call to order) - with the above trigger, the set up gave me a trigger like 1911's at 2.5lbs-ish.

 

That all said, the top two are all you need for the CO.

This is exactly what I run in my Q5 match

[himurax13]

Is this for the poly or the steel frame?

[bigbob21]

Is this for the poly or the steel frame?

Poly
The SF needs some modification to allow for other guide rods to work. There’s a thread on here somewhere talking about it.


Sent from my iPhone using Tapatalk