jakfrost1 Posted December 8, 2018 Share Posted December 8, 2018 I have been shooting my 2 DVC 9mm Major Open pistols ( primary/backup ) for a couple of years now, and very happy with their performance as they seem to be the right tool for my IPSC/USPSA matches, at a price point my back account can bear. However the proliferation of ‘Steel Challenge’ matches, ( I know, I put on 3 at my home club last season myself...), has me thinking I should perhaps consider something more dedicated to the ‘Steel Match’ requirements, besides 9 Major. I know STI makes a nice ‘Steel Master’ which would probably fill the bill, but the bill is what I am fretting over, having retired 6 months ago, the true cost of this ‘recreational sport’ is becoming more apparent with each passing ‘paycheck-less’ month, haha. So...my question, anyone have a suggestion as to how I could shoot reasonable ‘Steel Match’ loads reliably thru one of my DVC’s? There is no PF requirement other than to ‘ring the steel’.... Just ‘re-spring’ until it functions? I know the comp wouldn’t work well, if at all, at the reduced loads with the 5.40” barrel vs the 4.15” steel master’s tube, but other than that? Maybe just look for an inexpensive dedicated ‘Steel gun’? Jim DVC, NRA, USPSA, CSSA CHC ISPC Club Rep Link to comment Share on other sites More sharing options...
jnr88 Posted December 8, 2018 Share Posted December 8, 2018 (edited) Try 5.3 of Win 231 with 7# spring. 124PD JHP bullets. 1.165 LOA. Edited December 8, 2018 by jnr88 Add LOA Link to comment Share on other sites More sharing options...
theWacoKid Posted December 8, 2018 Share Posted December 8, 2018 Your gun is a good steel gun. Load up something with minimum book loads using a mid to slow powder. I've had good luck with 3n37, longshot, n105, and others. Drop in a 6 pound spring and you'll be ready to have fun. Link to comment Share on other sites More sharing options...
jakfrost1 Posted December 8, 2018 Author Share Posted December 8, 2018 So...just the recoil spring change? 6-7lb...leave the main spring alone? Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 8, 2018 Share Posted December 8, 2018 Hello: Use 95 grain 380 bullets and HS-6 powder giving 130-140PF loads. I use a 8 lb ISMI recoil spring. You could try Auto Comp or some other powder that will give you cheaper reloads. Another option would be to use a single stack 1911 and install a comp and dot. Thanks, Eric Link to comment Share on other sites More sharing options...
cecil Posted December 9, 2018 Share Posted December 9, 2018 I have shot Steel with my DVC using 124gr bullets loaded with 5.0gr AutoComp… changed the spring to a 7lb... Link to comment Share on other sites More sharing options...
hamiltonian Posted December 9, 2018 Share Posted December 9, 2018 I use my open gun for steel challenge but it is a light one rather than the heavier guns popular, now. I experimented a lot with different loads. I found that running at 155 PF with 3N37 and a 115 g bullet gave the best recoil impulse for steel challenge stages. Link to comment Share on other sites More sharing options...
cconnection Posted December 10, 2018 Share Posted December 10, 2018 I have both, the 9mm open SVI and the Sti Steel Master. the Steel master was built for minor loads, and really functions well. So smooth, its like shooting a 22. I have run 124 gn Precision Delta jacketed bullet with 3.8 gn of IMR red dot and even my 11 yr old Daughter has an easy time controlling.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now