Bwana Six-Gun Posted August 23, 2018 Share Posted August 23, 2018 Anyone have any experience with one of these? Supposed to attach to the quad rail and can be taken on and off to allow for ULSC and flagging. Link to comment
Aircooled6racer Posted August 23, 2018 Share Posted August 23, 2018 Hello: I use one that clamps to the rail when I practice. Makes brass collecting so easy The one I have has seen some use on my AR15 as well. It works but one thing that has happened to mine is one of the detents fell out but it still holds on as long as you don't overfill it. I need to contact Caldwell about that. Not sure I would use it in a match since it may get in the way. Thanks, Eric Link to comment
ProfessorGascan Posted August 23, 2018 Share Posted August 23, 2018 I've have one along with 4 of the extra pic rail attachments for my other rifles. It works really well. I've used it for 22lr, 9mm, and 5.56 without any complaints, I reload so it save my brass from banging off the concrete at the range and also the bonus of not having to chase them around. I did make one modification to it. I used the thin plastic sheet that comes in the bottom reusable shopping bag cut and folded to fit in the top 1/3rd of the bag where the brass hits it as it ejects. It works fine without the mod, but I use it a lot and the only negative reviews seem to be the bag ripping from hot brass hitting it in the same spot and I want it to last because I like it so much. Link to comment
stango424 Posted August 25, 2018 Share Posted August 25, 2018 We have a couple guys at our steel challenge club that use them and really like them... I would use one for practice but don't believe I would use one in a match. Not shootingthe pcc currently but I may snag one up anyways for when I start again. Link to comment
Bud White Posted September 4, 2018 Share Posted September 4, 2018 I use one it works very well have extra pieces to put it on all my other ar style rifles as i reload and want to keep as much brass in good shape as possible Link to comment
Gregg K Posted September 5, 2018 Share Posted September 5, 2018 I shot a steel match with one attached last weekend. It worked fine and wasn't a distraction plus I didn't have to look for any brass. Amazon has them on sale right now. $23.79 https://www.amazon.com/gp/product/B00EB5OU0Q/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Link to comment
Flatland Shooter Posted September 5, 2018 Share Posted September 5, 2018 Doesn’t look like it will work if you have a C-more Railway, right? Thanks. Link to comment
Aircooled6racer Posted September 5, 2018 Share Posted September 5, 2018 Hello: It will work with a C-More railway. I have that setup on one of my PCC's. Thanks, Eric Link to comment
Flatland Shooter Posted September 5, 2018 Share Posted September 5, 2018 1 hour ago, Aircooled6racer said: Hello: It will work with a C-More railway. I have that setup on one of my PCC's. Thanks, Eric Is your Railway mounted to the rear of the upper or is it over the ejection port? Link to comment
Aircooled6racer Posted September 5, 2018 Share Posted September 5, 2018 Hello: Mine is towards the front of the ejection port. Just far enough back to allow the brass catcher mount to clear the C-More. It also works well with the C-More and American Defense mount. Thanks, Eric Link to comment
dmshozer1 Posted September 5, 2018 Share Posted September 5, 2018 17 hours ago, Gregg K said: I shot a steel match with one attached last weekend. It worked fine and wasn't a distraction plus I didn't have to look for any brass. Amazon has them on sale right now. $23.79 https://www.amazon.com/gp/product/B00EB5OU0Q/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 How do you show clear? Link to comment
Gregg K Posted September 6, 2018 Share Posted September 6, 2018 (edited) 6 hours ago, Flatland Shooter said: Is your Railway mounted to the rear of the upper or is it over the ejection port? There is a lot of adjustment to the bags mounting point so even with a C-more mounted over the port there is enough adjustment to make it work. Edited September 6, 2018 by Gregg K Can't spell Link to comment
Gregg K Posted September 6, 2018 Share Posted September 6, 2018 3 hours ago, dmshozer1 said: How do you show clear? I just snatch the bag off, it takes less than a second to pull it off its detent. I pull the bag off and drop it in my cart, show clear and insert my flag. It's a lot less work than being a brass chicken. Link to comment
dmshozer1 Posted September 6, 2018 Share Posted September 6, 2018 1 hour ago, Gregg K said: I just snatch the bag off, it takes less than a second to pull it off its detent. I pull the bag off and drop it in my cart, show clear and insert my flag. It's a lot less work than being a brass chicken. Got it Link to comment
Flatland Shooter Posted September 6, 2018 Share Posted September 6, 2018 Do you think 9mm minor loads will be hot enough to burn a hole in the mesh? Link to comment
Gregg K Posted September 6, 2018 Share Posted September 6, 2018 9 minutes ago, Flatland Shooter said: Do you think 9mm minor loads will be hot enough to burn a hole in the mesh? I have rapidly shot through four 40 round mags in just a few minutes and not had any problems with my 9mm minor loads. I think the 5.56 rounds would be much hotter but I don't see any problems for 9mm. I'm happy so far. Link to comment
Flatland Shooter Posted September 6, 2018 Share Posted September 6, 2018 I'm convinced. Should arrive Friday. Thanks. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now