Taccom Extreme 9mm Bolt - Replacement Extractor Available?

[RaylanGivens]

I have a Taccom Extreme 9mm Bolt...  It works well, but I'd like to get a backup extractor or two...  Taccom doesn't list extractors or pins on their web site.

 

Does anyone know where to buy a replacement extractor for a Taccom Extreme bolt?

 

[mmlook]

it should use a standard 223 extractor 

[Acer2428]

It sure should, just like my KVP and FMP bolts do:

 

https://www.brownells.com/rifle-parts/bolt-parts/extractor-parts/extractors/ar-15-m16-extractor-prod17524.aspx

 

FWIW my OEM extractor was weak and I swapped it out for a BCM 556 extractor (like above) and it works like a champ. I would also recommend a spare roll pin (cheap insurance)

[stick]

Have you tried calling Tim Ubl?  I'm sure he will help you out

[jkrispies]

12 hours ago, mmlook said:

it should use a standard 223 extractor 

+1.  I asked Tim this directly while I was putting together my backup parts bag, and he replied that it’s a standard .223 extractor.  

[ima45dv8]

I cleaned up a couple of posts that don't belong here.

Please play nice, or play somewhere else.

 

-Admin

[RaylanGivens]

On 8/22/2018 at 4:16 PM, Acer2428 said:

It sure should, just like my KVP and FMP bolts do:

 

https://www.brownells.com/rifle-parts/bolt-parts/extractor-parts/extractors/ar-15-m16-extractor-prod17524.aspx

 

FWIW my OEM extractor was weak and I swapped it out for a BCM 556 extractor (like above) and it works like a champ. I would also recommend a spare roll pin (cheap insurance)

 

Thanks...  Ordered a couple of extractors and some springs and pins.

 

The Brownell's extractor pins were solid steel, not roll pins...  assume they will still work.

 

[RaylanGivens]

On 8/22/2018 at 8:11 PM, stick said:

Have you tried calling Tim Ubl?  I'm sure he will help you out

 

On 8/23/2018 at 2:15 AM, jkrispies said:

+1.  I asked Tim this directly while I was putting together my backup parts bag, and he replied that it’s a standard .223 extractor.  

 

Yes.

 

That's what he told me, too...  But there seem to be lots of extractors available...  I wanted to get one that would work with the Taccom Extreme 9mm bolt...  Would be nice if they sold the spare parts for their Extreme bolt on the Taccom web site...  But I am good to go now.