stryfox Posted January 22, 2006 Share Posted January 22, 2006 I use a wilson stainless protector, only mod I made was an ed brown extended wide thum saftey. It has never let me down so If I had to do it again I would buy the wilson again. Link to comment Share on other sites More sharing options...
RobE1010 Posted February 19, 2006 Share Posted February 19, 2006 Killer frame up Springer started life as a Mil Spec and is now the single sexiest skinny gun on the face of this planet. PaulW, can I get a witness?I'll try to scrounge up a pic. Basicly like the SV "Mall Ninja Wet Dream gun" only single stack and .45. Serrated Flat top Heinie S&A Brown Safeties Barsto barrel lots of serrating and checkering Black-t'd the whole thing. I can attest to DP40's humble description of his Sexy Springer...beautiful, functional and it looks even better with Eric shooting it! Fast and accurate! Link to comment Share on other sites More sharing options...
ryucasta Posted February 20, 2006 Share Posted February 20, 2006 My CDP firearm is a G21 with Dawson Sights (Fiber Front Target Rear), Vanek Trigger, Aluminum Seattle Slug and Lone Wolf Extended Magazine Release for G20/21 frames. Link to comment Share on other sites More sharing options...
Zerwas Posted February 20, 2006 Share Posted February 20, 2006 As my name would imply, I used to use a Springfield TRP Professional. Now, however I use a Wilson CQB with a couple of modifications. I put in a short curved trigger, a Dawson F/O green site installed, and a S/A arched main spring housing added to the mix. It is a great gun. But I do miss my Springfield..... Link to comment Share on other sites More sharing options...
RAMBOSKY Posted September 20, 2006 Share Posted September 20, 2006 Link to comment Share on other sites More sharing options...
austinkroe Posted September 20, 2006 Share Posted September 20, 2006 I am going to step out on a limb. I use my HK USP Tactical with a USP45 length barrel so it fits in the box. It got me to expert in under a year and won me two trophie in the only two major matches I have ever competed in. I see no reason why it wont take me to master. Although my ESP gun is an STI fattie. Just wanted to represent guns that were not 1911s or a glock. I just had to be the thread rebel. Link to comment Share on other sites More sharing options...
MichiganShootist Posted September 20, 2006 Share Posted September 20, 2006 (edited) My primary CDP gun is a stainless Springfield Trophy Match (show here with the rest of the family). I chose the Springer because so little had to be done to make it very competitive vs. Kimbers simular model which needed a trigger job, mag well, etc. See---- I'm a driver not a mechanic I just added a Dawson fiber front sight, rubber grips and started shooting. It came from the factory with a crisp 4 lb. trigger which is now more like 3 - 3.25 after 10,000 rounds have been fired. Pictured to the left is also a 9 MM Loaded Stainless Springer that I have set up just like the Trophy Match as an ESP gun. Same grips, safety, sights, etc. The smallest member of the family is my Springfield Ultra-Carry in 9 mm. I have it set up with nearly identical controls to the larger guns. This little alloy frame gun is one of my favorite carry pieces.. I believe that having my carry gun very close to the guns I shoot the most in competition is a big advantage. Rather than blasting tens of thousands of rounds through a 1911 for competition and then packin' a S & W revolver. Regarding a second gun.... I carry a well worn (but reliable) Kimber Custom Target II with me as a back up gun to all matches. It has identical sights, grips, and safeties as the Springfields. Edited September 20, 2006 by MichiganShootist Link to comment Share on other sites More sharing options...
ken hebert Posted September 24, 2006 Share Posted September 24, 2006 A pair of Les Baers: Concept VI and a Premier II, both with SA magwell and CMC mags (neither one of them like 47D's for some reason). Have a STI Ranger II that I'm looking to give a try, but I've been shooting a Para P16 in ESP to very pleasing results lately, so I'm having a hard time putting it down. It's kinda like cross-training as it is my Limited blaster also. Link to comment Share on other sites More sharing options...
Hot Brass Posted September 26, 2006 Share Posted September 26, 2006 Valtro 1998-A1. Link to comment Share on other sites More sharing options...
et45 Posted September 26, 2006 Share Posted September 26, 2006 Springer Loaded with an Ed Brown magwell,tread tape on the frontstrap and a 0.90 wide front sight.However I have been thinking long and hard about a Glock 21. Link to comment Share on other sites More sharing options...
PHolsted Posted September 27, 2006 Share Posted September 27, 2006 (edited) I use a Springfield XD witch helped me place 4th in this years IDPA Nationals. Todate I have only added a magwell. But after shooting some of the 35 yard targets at nationals it is pack up right now and I am sending it off to get new sights and a 4 to 5lb trigger job. Patrick My XD My Rock River A great gun..... It's the only gun I have that is just too darn beautiful to shoot!...... Not!!!! I know in this pic it is not CDP legal but when Rock River built it for me they also fitted another barrel with out the comp. Edited September 28, 2006 by PHolsted Link to comment Share on other sites More sharing options...
PHolsted Posted September 27, 2006 Share Posted September 27, 2006 I use a Springfield XD witch helped me place 4th CDP Expert in this years IDPA Nationals. Todate I have only added a magwell. But after shooting some of the 35 yard targets at nationals it is pack up right now and I am sending it off to get new sights and a 4 to 5lb trigger job. Patrck Link to comment Share on other sites More sharing options...
Chills1994 Posted September 28, 2006 Share Posted September 28, 2006 Holy Necropost...RAMBOSKY!! Good thread though and keep the pictures coming folks. Need more gun porn. Link to comment Share on other sites More sharing options...
Dennis Sherman Posted October 1, 2006 Share Posted October 1, 2006 I have an S&W 1911. I bought this model soon after it was released and sent it down to EGW for some upgrades. EGW sear, trigger job 4.5 lbs., EGW beavertail, mainspring housing, front strap checkering, ambi mag release, ambi mag release. Gun shoots well and I have run about 5k through it. Total invested: $750 for the gun, $900 for the EGW work. Link to comment Share on other sites More sharing options...
Chills1994 Posted October 2, 2006 Share Posted October 2, 2006 me likey your 1911, there Dennis Sherman. Checkered front strap, always a good feature to look for in a gun. Front serrations on the slide. BONUS! Stainless steel. Another good choice for a gun that's gonna get stuck in a holster and drawn a half a gazillion times. Link to comment Share on other sites More sharing options...
Dennis Sherman Posted October 2, 2006 Share Posted October 2, 2006 me likey your 1911, there Dennis Sherman.Checkered front strap, always a good feature to look for in a gun. Front serrations on the slide. BONUS! Stainless steel. Another good choice for a gun that's gonna get stuck in a holster and drawn a half a gazillion times. Thanks, now if I can only shoot it better..... Link to comment Share on other sites More sharing options...
mac266 Posted October 12, 2006 Share Posted October 12, 2006 I have a customized Springer, but if I had to do it over I'd just buy a Wilson made the way I want it...no hassle. That being said, I'm currently building a 9mm Caspian to use in ESP. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now