hump Posted January 7, 2018 Share Posted January 7, 2018 I put together a back up for my Shadow Target Custom production gun using a SP-01 as a base. I installed the complete CGW production legal kit along with a 8.5 lb hammer spring. The trigger is great and the gun sets off Winchester primers without any failures on the first 150 rounds. How many rounds do most people consider acceptable for verifying reliability? Link to comment Share on other sites More sharing options...
adamge Posted January 7, 2018 Share Posted January 7, 2018 2000 Link to comment Share on other sites More sharing options...
Furrly Posted January 7, 2018 Share Posted January 7, 2018 You might want to consider the extended firing pin as well Link to comment Share on other sites More sharing options...
hump Posted January 7, 2018 Author Share Posted January 7, 2018 I installed the extended firing pin and reduced power spring along with polishing it to a mirror finish. Link to comment Share on other sites More sharing options...
hump Posted January 7, 2018 Author Share Posted January 7, 2018 1 hour ago, adamge said: 2000 That's kinda what I was thinking. Link to comment Share on other sites More sharing options...
rowdyb Posted January 7, 2018 Share Posted January 7, 2018 yeah at least 500 rounds to accept that i'll keep using it. and for sure thousands to no longer think about a part. Link to comment Share on other sites More sharing options...
858 Posted January 8, 2018 Share Posted January 8, 2018 Reliability for what? There's a disparity between an area match and an ad hauc steel match. A local steel match is a good place to show up with your pet project, an area match not so much. Link to comment Share on other sites More sharing options...
hump Posted January 8, 2018 Author Share Posted January 8, 2018 1 hour ago, 858 said: Reliability for what? There's a disparity between an area match and an ad hauc steel match. A local steel match is a good place to show up with your pet project, an area match not so much. Reliability for local matches. I would switch out the 8.5 for an 11lb if I were going to a area match or a regional 3gun match. Link to comment Share on other sites More sharing options...
858 Posted January 8, 2018 Share Posted January 8, 2018 I would not ever show up with an 8.5lb spring because it is too light and the sources of tons of malfunctions. Link to comment Share on other sites More sharing options...
Brooke Posted January 8, 2018 Share Posted January 8, 2018 7 hours ago, 858 said: I would not ever show up with an 8.5lb spring because it is too light and the sources of tons of malfunctions. True. The 11 or 13 makes no important difference and you have far less risk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now