jaredbeesley Posted November 28, 2016 Share Posted November 28, 2016 I am looking for a load data for .40 Major shooting 180 JHP (Montana Gold) out of an Infinity with a Schuemann Ultimatch barrel. The powders I currently have to work with are Titegroup and Autocomp. Primers are CCI and Winchester. Thanks for the help in advance! Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted November 28, 2016 Share Posted November 28, 2016 Use the TG - it's a faster powder - any primers are fine. Use a Chrono to work up your load, slowly, but before you load too many, or too hot, make sure you're NOT getting any bullet setback - push the bullets hard against your reloading bench and re-measure them with your calipers. Heavy bullets, fast powders and bullet setback = kaboom. Link to comment Share on other sites More sharing options...
Argie Posted November 28, 2016 Share Posted November 28, 2016 4.9 gr N320 OAL 1.200 Link to comment Share on other sites More sharing options...
3gunDQ Posted November 29, 2016 Share Posted November 29, 2016 My titegroup load is 180 blues on 4.4gr at 1.18. 168-169pf out of a 5" gun. I am switching powder when I run out of titegroup. Link to comment Share on other sites More sharing options...
compshootfl Posted November 29, 2016 Share Posted November 29, 2016 What he said....... Link to comment Share on other sites More sharing options...
Deereman7 Posted November 30, 2016 Share Posted November 30, 2016 +1 on n320. I'm using 180 sns coated at 1.18 and down to 4.7 grains. Smooth as butter. Not nearly as smoky or snappy as titegroup Link to comment Share on other sites More sharing options...
blaster113 Posted April 8, 2017 Share Posted April 8, 2017 (edited) 4.5 grains of Titegroup with a 180 gr FMJ at 1.180 oal used to get me around 170 pf out of an Edge. I would start at 4.5 grs then work up in increments of .2 grain until the desired pf is reached. Edited April 8, 2017 by blaster113 oal info added Link to comment Share on other sites More sharing options...
inkballedtarget Posted April 8, 2017 Share Posted April 8, 2017 On 11/28/2016 at 8:16 PM, 3gunDQ said: My titegroup load is 180 blues on 4.4gr at 1.18. 168-169pf out of a 5" gun. I am switching powder when I run out of titegroup. What powder are you switching to? Link to comment Share on other sites More sharing options...
3gunDQ Posted April 8, 2017 Share Posted April 8, 2017 Not sure... I have 4000 loaded 40s and I shoot open primarily so 4K will last a good long while. N320 is what i am considering. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now