LilTMoney Posted October 27, 2016 Author Share Posted October 27, 2016 I am talking about 9mm, those are pictures someone else posted to show they are having the same issue. Link to comment Share on other sites More sharing options...
LilTMoney Posted October 27, 2016 Author Share Posted October 27, 2016 Wheelie never heard of using that die to remove a buldge? Are you just running the case all the way up? Link to comment Share on other sites More sharing options...
Steve RA Posted October 27, 2016 Share Posted October 27, 2016 Sort the cases and set aside all the ones with the shoulder on the inside, then sell them for scrap. Many people have trouble with case separation at the point where the shoulder starts (looking from case mouth) and there are three or possibly more brands with the shoulder. Remember, used primers and scrap brass sell for the same price, so save all the used primers and sell them also. Link to comment Share on other sites More sharing options...
Quack Posted October 27, 2016 Share Posted October 27, 2016 Your title say 9mm cases, but the pictures of your case gauge are of 40S&W. Don't know what difference that might make, but I am wondering which caliber you are discussing?My mess up, was thinking that was a pic I had of 9mm, not 40. Regardless of caliber, I use Hornady dies and a Lee FCD. When i encounter a bulged case I go slow on the resizing stroke. Since going slow, less than 1% fail to gauge. The rounds that fail, still drop in/out of my barrel. Link to comment Share on other sites More sharing options...
LilTMoney Posted October 27, 2016 Author Share Posted October 27, 2016 (edited) I am talking about 9mm, those are pictures someone else posted to show they are having the same issue. Here is one of mine. This is a custom case gauge made by grams engineering to match my sti barrel. All the ones that will not drop are almost identical to this one. Edited October 27, 2016 by LilTMoney Forgot to mention some information Link to comment Share on other sites More sharing options...
LilTMoney Posted October 27, 2016 Author Share Posted October 27, 2016 Great idea Steve! Link to comment Share on other sites More sharing options...
hceuterpe Posted October 27, 2016 Share Posted October 27, 2016 7 hours ago, LilTMoney said: I am talking about 9mm, those are pictures someone else posted to show they are having the same issue. Here is one of mine. This is a custom case gauge made by grams engineering to match my sti barrel. All the ones that will not drop are almost identical to this one. Pull the bullet, resize it again without the pin, and see if it fails the gauge.. Link to comment Share on other sites More sharing options...
LilTMoney Posted October 28, 2016 Author Share Posted October 28, 2016 Yes i have done that alot. Some cases will not resize to drop. I had about 300 out of about 1500 loaded that would not drop. Most were AMERC cases but some WIN and a few other different brands Link to comment Share on other sites More sharing options...
hceuterpe Posted October 28, 2016 Share Posted October 28, 2016 Trash the AMERC. Also trash the cases with the step inside the case. Freedom Munitions uses this a lot in their new case ammo. I believe that includes "IMT" "FM" and some others, but this is going by memory only. Link to comment Share on other sites More sharing options...
Boxerglocker Posted October 28, 2016 Share Posted October 28, 2016 On 10/25/2016 at 4:12 PM, Sarge said: Only problem with your display is those are not Glock striker marks on all of those sticking way up I was going to say the same... these days many are not aware that the modern generations of Glocks actually have more case support than many other manufacturers in the market. Link to comment Share on other sites More sharing options...
Boxerglocker Posted October 28, 2016 Share Posted October 28, 2016 16 hours ago, hceuterpe said: Pull the bullet, resize it again without the pin, and see if it fails the gauge.. I've said this numerous times... if you don't gauge you sized brass before loading, you can't make a determination that its actually the brass that is the problem. Link to comment Share on other sites More sharing options...
hceuterpe Posted October 28, 2016 Share Posted October 28, 2016 9 minutes ago, Boxerglocker said: I've said this numerous times... if you don't gauge you sized brass before loading, you can't make a determination that its actually the brass that is the problem. That's what I meant. check just the sized brass in the gauge, without bullet... Link to comment Share on other sites More sharing options...
Dave Campbell Posted October 28, 2016 Share Posted October 28, 2016 I've found some brass with the step inside, head stamp MAXXTech that won't size , and they are 30% heavier. Sorting 9 mm brass is a pain, but necessary. Link to comment Share on other sites More sharing options...
wheelie Posted October 29, 2016 Share Posted October 29, 2016 (edited) On 10/27/2016 at 6:04 AM, LilTMoney said: Wheelie never heard of using that die to remove a buldge? Are you just running the case all the way up? Yes, the shell holder touching the bottom of the die, no cam-over, hard contact. I also made a decap rod for that die and use the die with decapping rod as the first step in processing range brass. The die will not size the case mouth to hold a bullet, (remember we're working with a tapered case here) but it does squish the base down enough to fit any standard chamber. Any case that I run through this die and with reasonable force on the handle will gage properly when full length sized in a standard die. Any .380s in the bucket show obviously lower effort to size and wrecked 9mm are much harder to size. Once you get the hang of it, this upgrades your quality inspection and control quite a bit. Another other really good solution is to roll size the brass. The machine is pretty expensive but it will surely fix bulged brass. Sometimes you can buy brass processed this way. Its still cheap, so if you find some, that's another way to skin this cat. Edited October 29, 2016 by wheelie Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now