wheelie Posted August 29, 2016 Share Posted August 29, 2016 If you're shooting lead cast lubricated or plastic coated bullets, how does the MPX handle them? Any trouble keeping the gun running? Any cleaning challenges? Link to comment Share on other sites More sharing options...
billdozer Posted August 30, 2016 Share Posted August 30, 2016 It's not an mpx, but I've run a bunch of thebluebullets.com 135 gr coated lead bullets through my 9mm ar. No problems whatsoever. Link to comment Share on other sites More sharing options...
Ty Hamby Posted September 7, 2016 Share Posted September 7, 2016 MPX is a different animal than a blow back 9mm AR. I got my MPX today and have had no luck with 3 of my pet 9mm production load. BBI 135gn 3.3gn N320... No go. 147gn Xtreme plated with 3.4 gn of Universal no-go. I did shoot 100 rounds of 115 Blazer Brass with 0 failures. I am going to have to get the barrel port drilled out if I want to run subsonic ammo in this Gen2 MPX carbine. I would rather that than load and carry another 9mm load. Any ideas where to get my barrel port drilled out would be appreciated. Link to comment Share on other sites More sharing options...
IntenseImage Posted September 7, 2016 Share Posted September 7, 2016 MPX is a different animal than a blow back 9mm AR. I got my MPX today and have had no luck with 3 of my pet 9mm production load. BBI 135gn 3.3gn N320... No go. 147gn Xtreme plated with 3.4 gn of Universal no-go. I did shoot 100 rounds of 115 Blazer Brass with 0 failures. I am going to have to get the barrel port drilled out if I want to run subsonic ammo in this Gen2 MPX carbine. I would rather that than load and carry another 9mm load. Any ideas where to get my barrel port drilled out would be appreciated. Hit up Taylor Pickerel on the MPX Owners Facebook group Link to comment Share on other sites More sharing options...
billdozer Posted September 8, 2016 Share Posted September 8, 2016 Or just a numbered drill bit set. Stick a 5/16 dowel rod in your barrel and work your way up a few thousandths at a time. Link to comment Share on other sites More sharing options...
Nathanb Posted September 9, 2016 Share Posted September 9, 2016 I run subs through my mpx suppressed and un suppressed and have since day one without a single issue. It is a gem one though Link to comment Share on other sites More sharing options...
alma Posted September 9, 2016 Share Posted September 9, 2016 6 hours ago, billdozer said: Or just a numbered drill bit set. Stick a 5/16 dowel rod in your barrel and work your way up a few thousandths at a time. It's the gas port that needs to be opined up a bit, not the chamber. That requires some press work to get everything apart so you can get to the hole. Taylor Pickerell has easily done more than anyone else. I have a Gen one (which started with slightly larger gas port than the Gen IIs) and had no issues running very light Production loads through it. 147gr BBI with 4.1 N320. It shot extremely soft and quite. Link to comment Share on other sites More sharing options...
DocMedic Posted September 9, 2016 Share Posted September 9, 2016 I'm using a Gen 1, SBR'd MPX. So far it has ran m 115 poly Bullets with no issues what so ever, I used these for my production load too. 115 Poly'TCd with titegroup. Link to comment Share on other sites More sharing options...
billdozer Posted September 10, 2016 Share Posted September 10, 2016 On Thursday, September 08, 2016 at 8:48 PM, alma said: It's the gas port that needs to be opined up a bit, not the chamber. That requires some press work to get everything apart so you can get to the hole. Taylor Pickerell has easily done more than anyone else. I have a Gen one (which started with slightly larger gas port than the Gen IIs) and had no issues running very light Production loads through it. 147gr BBI with 4.1 N320. It shot extremely soft and quite. I meant using the dowel rod down the barrel so you dont smash into the other side when drilling out the gas port. Link to comment Share on other sites More sharing options...
alma Posted September 10, 2016 Share Posted September 10, 2016 Makes sense. Thanks Link to comment Share on other sites More sharing options...
Ty Hamby Posted September 10, 2016 Share Posted September 10, 2016 On 9/7/2016 at 3:32 PM, IntenseImage said: Hit up Taylor Pickerel on the MPX Owners Facebook group Great! I will do that. On 9/8/2016 at 6:48 PM, alma said: It's the gas port that needs to be opined up a bit, not the chamber. That requires some press work to get everything apart so you can get to the hole. Taylor Pickerell has easily done more than anyone else. I have a Gen one (which started with slightly larger gas port than the Gen IIs) and had no issues running very light Production loads through it. 147gr BBI with 4.1 N320. It shot extremely soft and quite. This appears to be a Gen2 feature. I have not heard of any Gen1's having a problem with light loads. Thank you I will hit Taylor up on getting my port drilled. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now