Blue Jacket Posted September 14, 2015 Share Posted September 14, 2015 Recently got a SP-01 and want to work up a good minor load. I have same Bayou 124s, 135s and have a sample pack of 147s on the way. I've loaded these for a Glocks and a 1911, but never worried about PF since I only shoot Limited major in USPSA. Thought I would try them all to see what it prefers as I am going to give production a try next year. I searched through the forum and came up with these loads. Is this a good place to start for a CZ? I will crono them, but figured I would learn from others trails and tribulations. Thanks 124 gr 3-6 to 3.8 Titegroup col 1.135 135 gr 3.2 to 3.4 Titegroup col 1.135 147 gr 3.1 to 3.2 Titegroup col 1.135 Link to comment Share on other sites More sharing options...
G T Posted September 14, 2015 Share Posted September 14, 2015 Recently got a SP-01 and want to work up a good minor load. I have same Bayou 124s, 135s and have a sample pack of 147s on the way. I've loaded these for a Glocks and a 1911, but never worried about PF since I only shoot Limited major in USPSA. Thought I would try them all to see what it prefers as I am going to give production a try next year. I searched through the forum and came up with these loads. Is this a good place to start for a CZ? I will crono them, but figured I would learn from others trails and tribulations. Thanks 124 gr 3-6 to 3.8 Titegroup col 1.135 135 gr 3.2 to 3.4 Titegroup col 1.135 147 gr 3.1 to 3.2 Titegroup col 1.135 124 and 147 loads look good. havent shot any 135's Link to comment Share on other sites More sharing options...
IDescribe Posted September 14, 2015 Share Posted September 14, 2015 Three different bullets push-tested to the same COL? Link to comment Share on other sites More sharing options...
Mrguns Posted September 14, 2015 Share Posted September 14, 2015 Recently got a SP-01 and want to work up a good minor load. I have same Bayou 124s, 135s and have a sample pack of 147s on the way. I've loaded these for a Glocks and a 1911, but never worried about PF since I only shoot Limited major in USPSA. Thought I would try them all to see what it prefers as I am going to give production a try next year. I searched through the forum and came up with these loads. Is this a good place to start for a CZ? I will crono them, but figured I would learn from others trails and tribulations. Thanks 124 gr 3-6 to 3.8 Titegroup col 1.135 135 gr 3.2 to 3.4 Titegroup col 1.135 147 gr 3.1 to 3.2 Titegroup col 1.135 124 and 147 loads look good. havent shot any 135's 124 extreme plated 4.0 titegroup on my cz sp01 pf is @131 @ 95F temp. Link to comment Share on other sites More sharing options...
dave33 Posted September 14, 2015 Share Posted September 14, 2015 I just chrono'ed some Bayou 135's yesterday over 3.3gr Titegroup, got an average 131 PF. This is out of my XDM 5.25. Shot pretty soft and fairly accurate. Link to comment Share on other sites More sharing options...
Blue Jacket Posted September 14, 2015 Author Share Posted September 14, 2015 The COL shown seems to be what a few people have been using. I would plunk test them to make sure they will chamber correctly. I know CZs tend to be short and mine doesn't like 115gr Montany Golds that work fine in my glock. Thanks Link to comment Share on other sites More sharing options...
Peplow530 Posted September 14, 2015 Share Posted September 14, 2015 Black Bullets Int. 135 gr bullets work very well for me out of my CZ's. I've got 5 different CZ pistols and they all seem to have very little headspace, the SP-01 being the shortest of them all. I have to load the 135 to an OAL of 1.09 to avoid jamming into the lands of the rifling. My 147gr have to be loaded even a scosche shorter, about 1.085 which is dangerously close to minimum OAL. As others have stated above, be shire to preform a plunk/push test, Good luck. Link to comment Share on other sites More sharing options...
nwhpfan Posted September 15, 2015 Share Posted September 15, 2015 3.2 TG is fairly common around me. 3.6 with 124 might be right on the edge. It runs 125's about 1040 from my 34 for that's worth. YMMV Link to comment Share on other sites More sharing options...
jsg Posted September 15, 2015 Share Posted September 15, 2015 When I was shooting Bayou 124 in my 9mm 1911 and M&P 3.7 Titegroup 124 Bayou CCI SP 1.145 OAL Got 128 avg PF in the 1911 and 129 avg PF in the M&P at 75 degrees with 65% humidity This was a pretty smokey load so I stopped shooting it. Went to Xtreme bullets -> no more smoke Link to comment Share on other sites More sharing options...
Blue Jacket Posted September 16, 2015 Author Share Posted September 16, 2015 My bayou 147s will be here tomorrow. I'll load them up and report back on the powder charges, PF and accuracy Link to comment Share on other sites More sharing options...
Bill Nesbitt Posted September 16, 2015 Share Posted September 16, 2015 124 gr 3-6 to 3.8 Titegroup col 1.135 135 gr 3.2 to 3.4 Titegroup col 1.135 147 gr 3.1 to 3.2 Titegroup col 1.135 I had to load my 135 Bayou bullets to 1.100 and my 147 Bayou to 1.125 to do the plunk test in my CZ P-01. Powder charges look about right. Link to comment Share on other sites More sharing options...
Gunnar Posted September 17, 2015 Share Posted September 17, 2015 I do 147gr 3.2gr titegroup with 1.125 col 3.7gr for 124gr with 1.125col as well. Link to comment Share on other sites More sharing options...
Blue Jacket Posted September 17, 2015 Author Share Posted September 17, 2015 Thanks for all the info. This should get me close. I'll see what they crono Link to comment Share on other sites More sharing options...
Balakay Posted September 19, 2015 Share Posted September 19, 2015 Chrono'd this load yesterday--- Created: 09/18/15 16:24Description: Titegroup 3.0gr @1.140"Notes 1: SA Range Officer 5"Notes 2: Bayou 9mmDistance to Chrono(FT): 10.00Ballistic Coefficient: 1.000Bullet Weight(gr): 147.00Temp: 86 °FBP: 29.75 inHg# FPS FT-LBS PF10 897 262.67 131.869 910 270.34 133.778 883 254.54 129.807 916 273.92 134.656 904 266.79 132.895 895 261.50 131.574 907 268.56 133.333 901 265.02 132.452 895 261.50 131.571 895 261.50 131.57Average: 900.3 FPSSD: 9.4 FPSMin: 883 FPSMax: 916 FPSSpread: 33 FPSShot/sec: 0.5True MV: 901 FPS Link to comment Share on other sites More sharing options...
Blue Jacket Posted October 12, 2015 Author Share Posted October 12, 2015 (edited) Thought I would provide a quick update on where I ended up. I shot these over the crono this weekend. Temp was about 65 degrees and sunny. I think I like the 147s, probably going with 3.0 grains once I shoot up the 124s I have left to load. Sorry chart didn't paste correctly Bullet Type Weight COL Powder Charge 5 shot avg velocity PF Bayou 147 1.115 TG 3 894 131.42 Bayou 147 1.115 TG 3 885 130.10 Bayou 147 1.115 TG 3.1 895 131.57 Bayou 147 1.115 TG 3.1 900 132.30 Bayou 147 1.115 TG 3.2 919 135.09 Bayou 147 1.115 TG 3.2 916 134.65 Bayou 135 1.120 TG 3.3 952 128.52 Bayou 135 1.120 TG 3.3 970 130.95 Bayou 135 1.120 TG 3.4 982 132.57 Bayou 135 1.120 TG 3.4 990 133.65 Bayou 124 1.125 TG 3.6 1040 128.96 Bayou 124 1.125 TG 3.6 1045 129.58 Edited October 12, 2015 by Blue Jacket Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now