GregJ Posted September 11, 2015 Share Posted September 11, 2015 I have the kinetic puller, and an RCBS puller. The kinetic takes too long, and the RCBS does not work very well with 230gr FMJ RN bullets as there doesnt seem to be enough of a bearing surface for the collet to grip onto. Only other option I have seen is the Hornady Cam Lock. Anyone have experience with this one? Or one that will work with 230gr jacketed RN? Link to comment Share on other sites More sharing options...
Jakobi Posted September 11, 2015 Share Posted September 11, 2015 I use the Hornady cam lock. It works but I have issues with it and .45 ball type rounds, too. As you noted, if the bullet is seated too deep it's difficult to remove with a collet type puller. Link to comment Share on other sites More sharing options...
RiggerJJ Posted September 11, 2015 Share Posted September 11, 2015 Grip-n-pull.com Link to comment Share on other sites More sharing options...
bfalcon00 Posted September 12, 2015 Share Posted September 12, 2015 Hmm first time I've seen that interesting. Link to comment Share on other sites More sharing options...
GregJ Posted September 14, 2015 Author Share Posted September 14, 2015 (edited) Grip-n-pull.com I saw that earlier. I might have to give it a try. Edit: I just ordered one. Will report back how it works. Edited September 14, 2015 by GregJ Link to comment Share on other sites More sharing options...
GregJ Posted September 17, 2015 Author Share Posted September 17, 2015 (edited) Ordered the Grip-n-Pull on the 11th, got it yesterday. Pulled about 20 rounds last night. This thing is slicker than snot on a door knob. It works great for 230gr RN, and it doesn't booger up the bullet, so I can reuse them as practice rounds. I had just one that took more than the first attempt. It must have been seated a tad deeper providing less bearing surface, but all the others came out on the first try. Only caveat with it, you need a single stage press for it to work. The kinetic hammer is getting an early retirement. Edited September 17, 2015 by GregJ Link to comment Share on other sites More sharing options...
Flash74 Posted September 17, 2015 Share Posted September 17, 2015 Yep, toss the hammer. After breaking two of them I went for the Hornady cam lock. The cam lock works really well and is easily adjusted if there is bullet to grab on to. Pulling 9 and 40 was easy, but I did have issues with 45 since the taper starts right of the case. Since I had 500 45's (wrong powder charge) that needed to be pulled I experimented and adjusted until it would pull the bullets. It probably took close to 30 minutes to get it pulling reliably. I wish I had known about the grip-n-pull back then. One tool would have covered all my needs. Link to comment Share on other sites More sharing options...
Jimk60 Posted September 19, 2015 Share Posted September 19, 2015 I have he RCBS puller, and it worked quite well for 9MM. I had to pull 200+ 45 ACP 200gr SWC and found that the 9mm collet was perfect for pulling the 45 200 GR SWC. And the majority of the bullets were totally unmarred. Doesn't help the situation with the round nose, but it does show that there is versatility. I will be checking out the grip and pull. Link to comment Share on other sites More sharing options...
GregJ Posted September 22, 2015 Author Share Posted September 22, 2015 I just pulled about 100 rounds last night with the Grip and Pull, in about 45 min. Best money I've spent in a long time. Link to comment Share on other sites More sharing options...
RPatton Posted October 20, 2015 Share Posted October 20, 2015 The G&P looks like just the ticket for that large jug of 'questionable" ammo that has accumulated in over 2+ decades of reloading and picking up live rounds of the range. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now