nmbpman Posted June 11, 2015 Share Posted June 11, 2015 I'm trying to figure out which CZC comp hammer I need for my TS. I put a CZ adjustable rear on it when I got it. I'm not sure if I need the standard wide or the low and wide. The way the new rear sits on the slide it doesn't look like the standard height would hit the sight but I'm looking for input on what to use. Link to comment Share on other sites More sharing options...
eerw Posted June 11, 2015 Share Posted June 11, 2015 On the TS, either one is fine with the adj rear sight. standard or low. Link to comment Share on other sites More sharing options...
kneelingatlas Posted June 11, 2015 Share Posted June 11, 2015 This one is my favorite: https://shop.cz-usa.com/ProductDetail/40108_Concealed-Hammer-Sa-Only Link to comment Share on other sites More sharing options...
GJGary Posted June 11, 2015 Share Posted June 11, 2015 Wide and low, if you change sights back and forth you never have to worry. Link to comment Share on other sites More sharing options...
nmbpman Posted June 11, 2015 Author Share Posted June 11, 2015 Thanks guys for the replies. Will I have to fit the sear/safety to get the safety to work properly like I had to do on my SP-01 when I swapped to the comp hammer? The main reason I'm wanting to swap the factory hammer out is to get rid of some of the pretravel creep that I have right now. The trigger pull weight is Ok, but that little bit of creep is driving me nuts. Link to comment Share on other sites More sharing options...
kneelingatlas Posted June 11, 2015 Share Posted June 11, 2015 I haven't had to fit safeties on any of my TSs. Link to comment Share on other sites More sharing options...
nmbpman Posted June 11, 2015 Author Share Posted June 11, 2015 That's good news, so basically polish it a little and drop in, and good to go? Atlas, so in your opinion, is it worth it to swap hammers? Like I said before the trigger is already pretty good, but that little bit of creep is kind of annoying. Link to comment Share on other sites More sharing options...
selecw Posted June 11, 2015 Share Posted June 11, 2015 I swapped hammers last weekend. No fitting was required and it took less than 30 minutes. I was hitting the rear sight, so it was definitely worth while. I have a CZ75SA lower and CTS upper in 9mm (IDPA legal unless you add a mag well extension). Link to comment Share on other sites More sharing options...
CZ85Combat Posted June 11, 2015 Share Posted June 11, 2015 Yes swap hammers. But never polish the hammer hooks on a comp hammer! They round over real easy Link to comment Share on other sites More sharing options...
repins1911 Posted June 12, 2015 Share Posted June 12, 2015 This one is my favorite: https://shop.cz-usa.com/ProductDetail/40108_Concealed-Hammer-Sa-Only Just got one of those in the mail today… Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now