Intercooler2 Posted March 18, 2015 Share Posted March 18, 2015 The Red Loctite wasn't holding the adjustment screw on the Super Sights. It seems recoil/movement works it loose regardless. I'm told this isn't as much of a problem in 9mm, etc... I went with a Henning's fixed unit and plan on sending my stocker to Dawson to see what options they can do on an adjustable replacement. Link to comment Share on other sites More sharing options...
Intercooler2 Posted March 18, 2015 Author Share Posted March 18, 2015 The only issue is a little in the appearance department with gaps. Link to comment Share on other sites More sharing options...
e-mishka Posted March 18, 2015 Share Posted March 18, 2015 Check this thread http://www.brianenos.com/forums/index.php?/topic/211585-Did-anyone-ever-figure-out-a-replacement-for-the-Super-Sight-adjustmen Im very happy with new adjustable sight Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Intercooler2 Posted March 18, 2015 Author Share Posted March 18, 2015 Check this thread http://www.brianenos.com/forums/index.php?/topic/211585-Did-anyone-ever-figure-out-a-replacement-for-the-Super-Sight-adjustmen Im very happy with new adjustable sight Sent from my iPhone using Tapatalk I tried it, but the link doesn't seem to be working. Link to comment Share on other sites More sharing options...
e-mishka Posted March 18, 2015 Share Posted March 18, 2015 http://www.brianenos.com/forums/index.php?showtopic=211585#entry2352728 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Nealio Posted March 18, 2015 Share Posted March 18, 2015 Yeah looks good except for the gap.. JB Weld??? Link to comment Share on other sites More sharing options...
Intercooler2 Posted March 18, 2015 Author Share Posted March 18, 2015 Did you, or can you take a picture of that one installed? Dawson sells one just like it and I thought it might hold position. I would be putting it on a 10mm and wonder how much the elevation screw would need to be adjusted out? I had a Dawson replacement before and it was even higher. Link to comment Share on other sites More sharing options...
BiggMike Posted March 19, 2015 Share Posted March 19, 2015 Did you, or can you take a picture of that one installed? Dawson sells one just like it and I thought it might hold position. I would be putting it on a 10mm and wonder how much the elevation screw would need to be adjusted out? I had a Dawson replacement before and it was even higher. The one I got from Dawson is a Henning sight. Just remember it is sighted in for 15 yards. Link to comment Share on other sites More sharing options...
Intercooler2 Posted March 19, 2015 Author Share Posted March 19, 2015 Any pictures of these setups? Link to comment Share on other sites More sharing options...
e-mishka Posted March 20, 2015 Share Posted March 20, 2015 Any pictures of these setups?My setup? Link to comment Share on other sites More sharing options...
Intercooler2 Posted March 20, 2015 Author Share Posted March 20, 2015 Yea and BiggMike Link to comment Share on other sites More sharing options...
himurax13 Posted April 1, 2015 Share Posted April 1, 2015 (edited) I am confused. Is this replacing the LPA rear sight or the wierd one that comes on the Elite Match? Edited April 1, 2015 by himurax13 Link to comment Share on other sites More sharing options...
wscottstewart Posted April 1, 2015 Share Posted April 1, 2015 Intercoolers slide started out as a hunters slide Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 1, 2015 Share Posted April 1, 2015 I am confused. Is this replacing the LPA rear sight or the wierd one that comes on the Elite Match? The one pictured above is for the LPA super sight cut, this one is for the Match cut: http://henningshop.com/products/tanfoglio-fixed-target-sight-for-match-model-h104t-m Link to comment Share on other sites More sharing options...
himurax13 Posted April 1, 2015 Share Posted April 1, 2015 I am confused. Is this replacing the LPA rear sight or the wierd one that comes on the Elite Match? The one pictured above is for the LPA super sight cut, this one is for the Match cut: http://henningshop.com/products/tanfoglio-fixed-target-sight-for-match-model-h104t-m Ah, I see. So basically any LPA sight will fit in a slide with the super sight dovetails? Like this one? https://shop.harrisoncustom.com/content/images/thumbs/0000513_hd-002-su-extreme-service-rear-sight.jpeg Link to comment Share on other sites More sharing options...
Steve RA Posted April 1, 2015 Share Posted April 1, 2015 Good spot for a slide racker. Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 1, 2015 Share Posted April 1, 2015 Ah, I see. So basically any LPA sight will fit in a slide with the super sight dovetails? Like this one? It might require a little fitting but it should be close. Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 1, 2015 Share Posted April 1, 2015 Personally I like the TS fixed rear, it makes a great slide racker: Link to comment Share on other sites More sharing options...
himurax13 Posted April 1, 2015 Share Posted April 1, 2015 (edited) Personally I like the TS fixed rear, it makes a great slide racker: I do too but for some reason my CTS slide shoots several inches low at 10 yards and the gap is a bit wider than I would like. Edited April 1, 2015 by himurax13 Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 1, 2015 Share Posted April 1, 2015 I do too but for some reason my CTS slide shoots several inches low at 10 yards and the gap is a bit wider than I would like. I prefer the wide notch. I'll trade you along with your next parts shipment as well as a front sight to get you dialed in Link to comment Share on other sites More sharing options...
Nealio Posted April 1, 2015 Share Posted April 1, 2015 Does the TS sight fit the same dovetail as the Supersight? Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 1, 2015 Share Posted April 1, 2015 Does the TS sight fit the same dovetail as the Supersight? No, the CZ dovetail is ~0.3mm bigger, so it has to be filed to fit. Link to comment Share on other sites More sharing options...
Nealio Posted April 1, 2015 Share Posted April 1, 2015 Does the TS sight fit the same dovetail as the Supersight? No, the CZ dovetail is ~0.3mm bigger, so it has to be filed to fit. Same angle though? Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 1, 2015 Share Posted April 1, 2015 yes Link to comment Share on other sites More sharing options...
himurax13 Posted April 1, 2015 Share Posted April 1, 2015 I do too but for some reason my CTS slide shoots several inches low at 10 yards and the gap is a bit wider than I would like. I prefer the wide notch. I'll trade you along with your next parts shipment as well as a front sight to get you dialed in You are so kind to me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now